eeepc901, 2GB RAM , 4GB SD boot drive and 64GB Runcore SD drive Hi there! switched over from puppeee to quirky. Although puppeee is streamlined for ASUS eeepc's (very fast booting!), it's also overloaded with programs I never needed. But biggest problem is, that puppeee's old cups version is a pain ...

Jemimah, solved the runcore sd hd problem by performing a raw format (FAT32). Now also Puppeee ca see my runcore sd hd. :D For me there is 1 important issue left: PRINTING (with CUPS) does not work in Puppeee :twisted: I have done a new (rc5) frugal installation with only installing 1 network printe...

Jemimah, everybody seems to be happy with the new puppeee releases, but it looks like that I'm still fishing behind the net. My 901 continues to have the problems with sd drives, especially from runcore. Also the cups version in puppeee is a nightmare. Can you do me (us) a favour and release a pet f...

@jemimah, thanks for all your trouble, but the 901 seems to be a problem. Did a NEW installation and replaced 1st the vmlinuz Atom with drivers: no detection of runcore sd card. Then I replaced rc.sysinit and got what I got before: Login [2250]: root Login on 'UNKNOWN' modprobe: FATAL: /sys is not m...

that's what I did: used gtlkp with newer cup 1.3.11, but no printers in programs.I also copied ppd files to /etc/cups/ppd, but when I install new printers that Gutenprint decompresses some ppd files but I still can't find my ppd printer. BTW in another 8 days I follow your thread now for 1 year. You...

installed gtklp, deinstalled cups.1.3.11, reboot: printers are back, but no access to localhost:631. Next: installed cups 1.3.11: printers are gone again.
But localhost:631/printers is back. So no success

Will try it. It's still early here 10 pm,

the problem I mentioned earlier (red cross in icon) disappeared after 4rth booting

Jemimah, there is something wrong or missing with cups.I upgraded cups with cups-1.3.11-i486.pet. I'm using puppeee professional and need to print to several printers. Cups 1.3.11 lets you search for and install ppd files, which the old cups in rc4 does not allow. Once you now upgrade cups, ALL your...

@Jemimah, I'm so excited whether 901 will work with puppeee rc4, but I have to wait until Friday, when I'm home and connect my runcore sd. With first installation my current sd and usb devices were detected well :D What I noticed with the latest rc's, and I think I mentioned that already, is that di...

Help needed. I have installed Fluppy and so far I like it. I have also installed OO and installed my printers in CUPS. I upgraded to CUPS 1.3.11 !!! My OO finds the printers and printing is without any problem. ALL OTHER PROGRAMS do not find any printer. So CUPS does not tell the Fluppy programs whe...

My 3sf file does not boot any more. I made a new USB boot stick, that still boots, but without showing ANY drive at the desktop.

After a completely NEW installation (on USB stick), I can confirm that puppeee will not boot anymore. Fatal: /sys is not mounted.

@jemimah

copied the file with the result: modprobe: FATAL: /sys is not mounted
What did I do wrong ??

rc35 on 901 @jamimah I think this happens when the SSD is slower to respond during boot than the usb drives. When the drive names change, puppy gets confused, or something like that. I can try to modify snapmergepuppy so that information doesn't get saved. It looks to me as workaround, but is it a s...

901 with rc35 @Jemimah there seem to be still basic (timing) problems with Puppeee and solid disks and/or sd cards (Not only runcore!) I just booted from the Asus Phison sd (4GB) but neither could see it on the desktop nor access it with Gparted. It just disappeared but it is still listed under GP. ...

901 with rc3, at first glance: the upgrade to rc3 was without problem, but after reboot, but my 1st sd (4GB) is not detected anymore. The 2nd drive (sda1) (32GB) as well as the boot USB stick (sdb1) and my sd card (sdd1) were detected well. setup Alsa sound: No supported card found :oops: streamtune...

901 with rc2 @jemimah as soon as I connect to AP via pwireless2 the "active interface" icon is crossed (red), although I'm connected fine. This was never before. edited After restarting X, the correct function of the icon returns, but the problem comes back direct after connecting to anoth...

jemimah, installed rc on boot stick. Installation really easy :D, and it transferred my sfs beta50 to sfs rc60 within a few minutes. I have not yet checked my runcore card since I'm traveling the coming days in the UK and I don't have it with me. But remember, 901 has 2 sd's. 1st sd is 4GB, 2nd sd i...

@Jemimah I have reinstalled my original sd card again, to get Puppeee running. It is really that best system for me :D My Runcore PCIe card (64GB!) has a small connector for a USB cable. So I tried to connect the card via that way from outside via USB. No success! :( This is still working with all o...

I have one thing for you to try: Edit /etc/Wireless/RT2860STA/RT2860STA.dat and change WirelessMode=5 to WirelessMode=11. Then restart and see if it works. No success with puppeee neither Quirkey! Quirky has WirelessMode=9, but also with 11 no success. Unfortunately. @jemimah, do you know already w...

@jemimah,

wlan "N" is not working on my 901. Neither with beta5 nor with quirky21. I have an access point with N standard that works well on my windows machines. If you assist, I can due some testing on "N".

happy weekend!