I downloaded devx_slacko_531.sfs and the source for bridge-utils 1.5:
I compiled bridge-utils under slacko 5.3.1 but I got the same output msg if I try to add wlan0 interface to my bridge def.

Any other suggestion would be welcome.

Thank you very much.

Claude

I tried bridge-utils 1.5 with Puppy Slacko 5.3.1:

I can't add interface wlan0 to the bridge interface (br0) created:

msg output: can't add wlan0 to bridge br0: Operation not supported

eth0 interface was added ok.

eth0 was configured as 0.0.0.0
wlan0 was configured as 0.0.0.0

Claude

Is there any bridge pet available for wireless adaptor with rt73 driver (tp-link TL-WN321G) ?

Thank you very much.

Claude

I would like to be able to stream my stereo sound output over my wireless network: I got a cable connected between the audio output of my cable box (on my stereo system) and the line-in of my audio card of a portable. On the portable, I can hear the sound coming out but I would like to capture it an...

I installed Slacko 5.3.3 in frugal mode: after I changed keyboard (ps2) configuration: country: ca layout:multi, language: cf, keyboard operation is OK. Soon I reboot the pc, the keyboard becomes unusable. It looks like the configuration changes are not saved with the pupsave. Otherwise, mouse opera...

What version of VLC is recommended to install with puppy slacko 5.3.1 ?

I tried 1.1.11, 1.1.12, 2.0.0 without success: allways a module or lib missing.

Also, how may I capture audio output for streeaming with VLC ?

Claude

If I connect an audio source (audio video decoder) to the line input of my computer, I can hear the audio on the computer. I am looking for a way to transmit this audio output from the computer (directly connected to the video decoder) to my home wireless network, so I may listen to the audio on any...

Running Slacko on an old laptop (Satellite 4090XDVD) with trident video card (cyber 9525): first time I run it (frugal install), probe video card do not work, also try vesa, no more success. I copied xorg.conf from a Wary frugal installation: X loads OK but no mouse or keyboard access. Claude More i...

Yes, there is a pupsave inside my directory (frugal install).

Thank you for your suggestion.

Claude

I did a frugal installation of Puppy Slacko 5.3.1; when I modify the keyboard map with the countrywizard, the new configuration (cf keymap) is ok.
After I reboot, the modified configuration is not restored.

Any solution please ?

Claude

Using Puppy Slacko 5.3.1, I downloaded bridge-utils 1.5: when I try to define my bridge interfaces, I got the following messages: brctl addbr br0...... OK brctl addif br0 eth0.....OK brctl addif br0 wlan0 can't add wlan0 to bridge br0: Operation not supported Is there a more recent version of bridge...

How may I download Barebones Lucid 5.01 ?

I tried the link from FileDropper but no results.

Thank you.

Well, I thing that my mileage will be very low.....

Even with output from IRDADUMP, IRDA do not detect anything from my remote device...... I tried mode2 and xmode2 and no result at all.....

Before I close this case, any new suggestion ?

Thank you very much.

Claude

I tried something else: echo 1 > /proc/sys/net/irda/discovery and now irdadump gives the following: 15:16:59.520050 xid:cmd 40bb9847 > ffffffff S=6 s=0 (14) 15:16:59.607947 xid:cmd 40bb9847 > ffffffff S=6 s=1 (14) 15:16:59.695974 xid:cmd 40bb9847 > ffffffff S=6 s=2 (14) 15:16:59.783993 xid:cmd 40bb9...

I tried your suggestions about modprobe et irda0: no more results. I joined a few more information from my configuration: the output from /cat/interrupts: CPU0 0: 1757453 XT-PIC-XT timer 1: 1486 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 2 XT-PIC-XT 4: 2 XT-PIC-XT lirc_sir 5: 2 XT-PIC-XT 6: 3 XT-PIC-...

Tempestuous,

I tried your suggestions about ttyS0 or ttyS2 without success:

irdadump does not give any result......

Thank you very much.

Claude

Hi, tempestuous, I read your post on probable solution for IRDA port on laptop: here is my problem: Old laptop toshiba Satellite 4090xdvd: no mention of any setting or Irda port in the BIOS. I am using a frugal install of Puppy Lite 4.20 with kernel 2.6.25.16 I installed irda-utils-0.9.18+smcinit-0....

I tried the mount -t nfs with -o ro: no more success...... I am asking me one thing: with command: xmount 192.168.1.105:/mnt/hdb1/Musique Media nfs ro the error msg is: mouting..... failed: No such file or directory with command: xmount 192.168.1.105:/Musique Media nfs ro the error msg is: mount.......

Using Puppy 4 (kernel 2.6.21.7) and nfs server (nfsd-k2.6.21.7-i486.pet), /etc/exports: /mnt/hdb1/Musique 192.168.1.100(ro,no_root_squash,no_subtree_check) from linux client, xmount 192.168.1.105:/mnt/hdb1/Musique Media nfs msg displayed: reason given by server: Permission denied and in /var/log/mes...

I try to use wusb11 wireless card with Puppy 5.2.5 (kernel 2.6.33.2)

output from lsusb: Bus 001: Device 003: ID 077b:2219

module at76c50x_usb has been loaded at boot time

interface wlan0 not showing out with ifconfig command

Any known solution for this problem ?

Thank you very much.

Claude