BionicPup32 (UPupBB) (27 June 2020)

Message

Revolverve · #241 Post by **Revolverve** » Tue 24 Jul 2018, 11:05

peebee, is there changelog somewhat of +9.
My easystroke saga got finally nothing to do with upupbb or my bad testing...
Its a know bug...it was gone with kernel switching (!!!%°?)but back with +9 , now with all kernel .Whore there gtk related update?Just trying to point to the problem..
Thanks

peebee · #242 Post by **peebee** » Tue 24 Jul 2018, 15:15

Revolverve wrote:peebee, is there changelog somewhat of +9.

Ubuntu based Packages updated:

:cups:
:libcurl3-gnutls:
:curl:
:mesa:
:gstreamer1:
:libglvnd:
:xorg_base_new:
:xorg_dri:
:libgles:
:libjpeg:
:libpng:
:libsystemd:
:udev:
:libmirclient:
:libxatracker2:
:linux-header:
:libvdpau:

Fishy · #243 Post by **Fishy** » Fri 27 Jul 2018, 19:27

I managed to get 2.92 but need 2.93 or 2.94 for my book site. The Tahr pet that I have doesn't work. Any suggestions?

foxpup · #244 Post by **foxpup** » Fri 27 Jul 2018, 19:43

Fishy wrote:I managed to get 2.92 but need 2.93 or 2.94 for my book site. The Tahr pet that I have doesn't work. Any suggestions?

Transmission 2.94 is in the repo of ubuntu cosmic: https://packages.ubuntu.com/cosmic/transmission
Or you could try compiling the source in upupBB.

peebee · #245 Post by **peebee** » Sat 28 Jul 2018, 14:53

7a31099fe67272d524f7764f9d18b39a upupbb-18.05+10.iso

{delta}

cd/dvd autoplay fixed + ubuntu updates

Marv · #246 Post by **Marv** » Sat 28 Jul 2018, 17:34

Autoplay confirmed in 18.05 +10, both CDs and DVDs on the i5 based laptop. Done both for a pristine boot and for my updated savefile (modified to integrate pcmanfm sans gvfs into upupbb) using the 64b 4.17.10 kernel. Audio CD can be ejected from pmusic, No eject capibility in gnome-mplayer for DVD that I can see.

Thanks,

peebee · #247 Post by **peebee** » Sat 28 Jul 2018, 19:31

Marv wrote:Autoplay confirmed in 18.05 +10, both CDs and DVDs on the i5 based laptop. Done both for a pristine boot and for my updated savefile (modified to integrate pcmanfm sans gvfs into upupbb) using the 64b 4.17.10 kernel. Audio CD can be ejected from pmusic, No eject capibility in gnome-mplayer for DVD that I can see.
Thanks,

Thanks Marv - with JWM you do get a desktop icon and you can right click on sr0 to eject the cd/dvd.....

perdido · #248 Post by **perdido** » Sun 29 Jul 2018, 17:41

Nice work peebee, upupbb-18.05+9 running well on Dell E6400 XFRwith nvidia card with nouveau driver detected during boot, kernel 4.9.96

Installed the NVIDIA-Linux-x86-304.137.run package and compiled after installing the devx, kernel sources and kernel headers. Everything good.

If anyone wants NVIDIA-Linux-x86-304.137 pet it is available here 43.3MB md5 e736be252c3e33a66338bb85f8c5075d
automatically disables nouveau driver just requires a reboot after install and run nvidia setup from menu with Applications --->Setup --->NVIDIA X Server Settings

Supported video cards for the 304.137 driver are at this link
https://www.nvidia.com/download/driverR ... 3708/en-us

.

peebee · #249 Post by **peebee** » Sun 29 Jul 2018, 18:38

perdido wrote:If anyone wants NVIDIA-Linux-x86-304.137 pet it is available here 43.3MB md5 e736be252c3e33a66338bb85f8c5075d
automatically disables nouveau driver just requires a reboot after install and run nvidia setup from menu with Applications --->Setup --->NVIDIA X Server Settings

Thanks perdido - have added a link to post #3.....

perdido · #250 Post by **perdido** » Wed 01 Aug 2018, 14:32

Hi peebee,

Is there a file hashing util?

I don't see gtkhash (usually in utility menu)

.

peebee · #251 Post by **peebee** » Wed 01 Aug 2018, 18:24

Utility -> pupMd5sum

Also in right click menu for some file types (e.g. .iso .sfs) if ydrv in .iso is installed.

shelezyaka · #252 Post by **shelezyaka** » Thu 02 Aug 2018, 19:03

Hello . How do I remove the checkbox "Disable Wireless Device Polling". I am attaching the picture in Russian.
If after the start of the system I forget to turn it off, then after 5 minutes the modem falls asleep.
Configs did not find any.
Another question, after installing the NVIDIA drivers, does not want to run the switch
Xneur. How can I fix it or use something else?

perdido · #253 Post by **perdido** » Fri 03 Aug 2018, 00:57

shelezyaka wrote:Hello . How do I remove the checkbox "Disable Wireless Device Polling". I am attaching the picture in Russian.
?

Mouse click the wireless device polling line either turns it off or turns it on.
When you click it the window closes.
When you right click the network icon again to open the window, it will be changed.

I do not know about Xneur.

.

shelezyaka · #254 Post by **shelezyaka** » Fri 03 Aug 2018, 09:10

perdido wrote: Mouse click the wireless device polling line either turns it off or turns it on.
When you click it the window closes.
.

This is understandable, I know. I need to start off, so I do not go there - I forget sometimes.

shelezyaka · #255 Post by **shelezyaka** » Mon 06 Aug 2018, 09:43

Greetings.
I want to completely switch to upupbb 18.05 + 10, I still sit (sitting) on the precise 5.4.3. On UPup Bionic spinning everything is new without problems. Installing systems for use is always full. I need a switch for Russian-English layouts. Installed Xneur, with the standard section in xorg.conf

Code: Select all

#Section "InputDevice"
#Identifier "Keyboard0"
#Driver "kbd"
#Option "XkbRules" "xorg"
#Option "XkbModel" "pc104"
#Option "XkbLayout" "us"
#Option "XkbVariant" ", winkeys"
#Option "XkbOptions" "grp: ctrl_shift_toggle, grp_led: scroll"
#EndSection

it did not work at all, do not pay attention the section is now commented out.
Using the method of scientific poking, I found out and appended another

Code: Select all

Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/ dev / input / event *"
Driver "evdev"
Option "XkbRules" "evdev"
Option "XkbModel" "pc104" # xkbmodel0
Option "XkbLayout" "us, ru"
Option "XkbVariant" ", winkeys"
#Option "XkbVariant" "" # xkbvariant0
Option "XkbOptions" "terminate: ctrl_alt_bksp, grp: ctrl_shift_toggle, grp_led: scroll" # xkboptions0
EndSection

With this section, layouts are switched, BUT! . Everytime when the system boots, xorg.conf is rewritten - why, I do not understand? Iron does not change, and of course in "XkbLayout" there is only "us"
How to prevent rewriting this config when starting?
This garbage was formed after installing the proprietary drivers on Nvidia several posts above.

perdido · #256 Post by **perdido** » Mon 06 Aug 2018, 19:07

Something to look at, this person had xorg.conf changed during reboot and fixed by changing immutable bit on xorg.conf file using the utility chattr

https://forums.linuxmint.com/viewtopic.php?t=173325

Info about chattr https://www.tecmint.com/chattr-command-examples/

If chattr is used to set immutable bit +i the file cannot be changed until the immutable bit is removed -i

You do not need sudo command, puppy already runs as root

Hope it helps, I have never used chattr

.

shelezyaka · #257 Post by **shelezyaka** » Mon 06 Aug 2018, 20:53

While I solved the blunt crass method, adding a line of code to /etc/rc.d/rc.local

Code: Select all

sed -i 's / Layout "" us / Layout "" us, ru /' /etc/X11/xorg.conf

Proposed try tomorrow. Thank you.[/code]

shelezyaka · #258 Post by **shelezyaka** » Tue 07 Aug 2018, 10:42

perdido
Yes, thank you help!

perdido · #259 Post by **perdido** » Sat 11 Aug 2018, 13:56

No good way to hash SHA1, SHA256, & CRC32 except from the command line.
I installed gtkhash from the ubuntu bionic repository and did not like how it looked, it did work ok though.

I just ended up using the gtkhash from precise puppy. Works good and looks good.
It is in this pet file attached.

shelezyaka · #260 Post by **shelezyaka** » Tue 14 Aug 2018, 12:13

Good day.
Why are WiFi modems not defined classically as wlan0 wlan1 and so on, but what is not clear
identifier, in this case "wlxb0487a9366fa". And each for a different WiFi or a computer. Very uncomfortable ! I have conky installed and every time I change the device, I need to change the ID in the rows. How to get around this inconvenience

Code: Select all

# iwconfig
enp3s0    no wireless extensions.

wlxb0487a9366fa  IEEE 802.11  ESSID:"tango10"  
          Mode:Managed  Frequency:2.437 GHz  Access Point: E8:4E:84:77:C4:25   
          Bit Rate=26 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=46/70  Signal level=-64 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:9   Missed beacon:0

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

BionicPup32 (UPupBB) (27 June 2020)

Transmission Update

Re: Transmission Update