Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Wed 14 Nov 2018, 18:18
All times are UTC - 4
 Forum index » Advanced Topics » Puppy Projects
slacko-700 rc3
Moderators: Flash, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 31 of 32 [471 Posts]   Goto page: Previous 1, 2, 3, ..., 29, 30, 31, 32 Next
Author Message
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Sat 06 Oct 2018, 04:58    Post subject: slacko-700 rc3  

I downloaded and installed the slacko64-6.9.9.9-uefi-k3.16-PM-LO.iso.
After installing favorite applications some (kodi,vlc) wouldn't run.
I changed the kernel to the newest 4.4.159 and it works much better.

System: Host: puppypc32401 Kernel: 4.4.159 x86_64 (64 bit) Desktop: JWM 2.3.2 Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: desktop System: Hewlett-Packard product: p7-1246s serial: MXX232077R
Mobo: Foxconn model: 2ADA v: 1.00 BIOS: AMI v: 7.12 date: 06/07/2012
CPU: Quad core Intel Core i5-3550 (-MCP-) speed/max: 1600/3301 MHz
Graphics: Card: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
Display Server: X.org 1.18.3 driver: intel tty size: 190x37 Advanced Data: N/A for root
Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 3000.6GB (0.7% used)
Weather: Conditions: 48 F (9 C) - Overcast Time: October 6, 4:47 AM EDT
Info: Processes: 181 Uptime: 11 min Memory: 245.4/11905.5MB Client: Shell (bash) inxi: 2.3.8

I did all the Update Notices - Slackware Bugfixes.
Updated Palemoon to the latest version, added Firefox 60.2.2esr which was one of the Update Notices.
Added the newest pulse audio from BLFS and sound works in Firefox, not sure if pulse or the dependency
listed as a must have fixed sound.

It's working well,
I like it Smile
-----------------------------------------------------------------

EDIT: I cleaned up "the look" of one of my clones of this install
that runs on another HP desktop.

Great fun Smile
screenshot3.jpg
 Description   
 Filesize   44.28 KB
 Viewed   936 Time(s)

screenshot3.jpg

screenshot.jpg
 Description   
 Filesize   36.3 KB
 Viewed   1242 Time(s)

screenshot.jpg


Last edited by Billtoo on Tue 09 Oct 2018, 11:44; edited 1 time in total
Back to top
View user's profile Send private message 
Sailor Enceladus

Joined: 22 Feb 2016
Posts: 1547

PostPosted: Sun 07 Oct 2018, 13:50    Post subject:  

I tried another Slacko64 woof-CE build on my dad's Core2Duo laptop today

http://www.mediafire.com/folder/04k8b8812ccoh/testing

It has Palemoon 28.1 and Abi/Gnumeric in the adrv and kernel 4.9 with linux-firmware (default options) in zdrv.
Back to top
View user's profile Send private message 
foxpup


Joined: 29 Jul 2016
Posts: 577
Location: europa near northsea

PostPosted: Mon 08 Oct 2018, 14:56    Post subject:  

Sailor Enceladus wrote:
I tried another Slacko64 woof-CE build on my dad's Core2Duo laptop today

http://www.mediafire.com/folder/04k8b8812ccoh/testing

It has Palemoon 28.1 and Abi/Gnumeric in the adrv and kernel 4.9 with linux-firmware (default options) in zdrv.
Hello Sailor, thanks for this build. I tried it on my recent i5 laptop.
It takes a lot of time to get to X after all is loaded. It waits for a minute or more on a black screen with just a cursor on left top corner. It may need a few keystrokes to continue, at least that is what I do: hit a few keys.
I changed to kernel and zdrv.sfs from the build of micko and that boots up fine.
Strange, because that is almost the same kernel.
I had to do the same with the previous build you offered.
Maybe it has something to do with the Core2Duo laptop you built it for and with.

I works very well otherwise. Still have to find another bug. Wink
Back to top
View user's profile Send private message 
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Mon 08 Oct 2018, 18:18    Post subject: slacko-700 rc3  

@Sailor

I installed to a 64gb flash drive, computer is an HP:

System: Host: puppypc19362 Kernel: 4.9.131 x86_64 (64 bit) Desktop: JWM 2.3.6 Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: desktop System: Hewlett-Packard product: HPE-410f serial: MXX0370KF3
Mobo: FOXCONN model: 2AB1 v: 1.00 BIOS: American Megatrends v: 6.02 date: 07/21/2010
CPU: Hexa core AMD Phenom II X6 1045T (-MCP-) speed/max: 800/2700 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570]
Display Server: X.org 1.18.3 driver: radeon tty size: 151x28 Advanced Data: N/A for root
Network: Card-1: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL810xE PCI Express Fast Ethernet controller driver: r8169
Drives: HDD Total Size: 1062.9GB (1.4% used)
Weather: Conditions: 57 F (14 C) - Overcast Time: October 8, 6:07 PM EDT
Info: Processes: 202 Uptime: 1:51 Memory: 451.7/7984.2MB Client: Shell (bash) inxi: 2.3.8

Updated PPM and installed Udate Notices - Slackware Bugfixes ( 7 or 8 )
Installed favorite applications with PPM
Changed theme to one that's easier on the eyes.
Sound works in Firefox.

It's working well,
Thanks.
---------------------------------------------------------------
EDIT: The VulnChecker says we're okay

# sh VulnChecker
l1tf Not affected
meltdown Not affected
spec_store_bypass Not affected
spectre_v1 Mitigation: __user pointer sanitization
spectre_v2 Mitigation: Full AMD retpoline
#
screenshot.jpg
 Description   
 Filesize   82.24 KB
 Viewed   1001 Time(s)

screenshot.jpg

Back to top
View user's profile Send private message 
Wac

Joined: 20 May 2009
Posts: 34

PostPosted: Tue 09 Oct 2018, 12:34    Post subject:  

Has anyone have an updated version of Slacko64 6.9.9.9 with FF and LO, on which the software packages are updated, essentially Firefox, but it will also be nice if it has all the dependencies needed to run the newest version of Skype?
Back to top
View user's profile Send private message 
stefan21

Joined: 12 Apr 2013
Posts: 18

PostPosted: Wed 10 Oct 2018, 14:37    Post subject: Re: slacko-700 rc3  

Billtoo wrote:
I I changed the kernel to the newest 4.4.159 and it works much better.


I have a problem of understanding, maybe you can help me.

This is my puppy info:

# inxi -Fxx
System: Host: puppypc15062 Kernel: 4.9.30 x86_64 (64 bit gcc: 5.3.0)
Desktop: JWM 2.3.2 dm: N/A Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: laptop System: LENOVO product: 6468AL2 v: ThinkPad T61 serial: 6468AL2L3B6436
Mobo: LENOVO model: 6468AL2 serial: VF1GA85H08M
BIOS: LENOVO v: 7LETB0WW (2.10 ) date: 01/21/2008
Chassis: type: 10
Battery BAT0: charge: 55.0 Wh 97.9% condition: 56.2/56.2 Wh (100%)
volts: 12.1/10.8
model: SONY 42T4566 serial: 3159 status: N/A
CPU: Dual core Intel Core2 Duo T7100 (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 ssse3 vmx) bmips: 7181
clock speeds: min/max: 800/1801 MHz 1: 1200 MHz 2: 1200 MHz
Graphics: Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
bus-ID: 00:02.0 chip-ID: 8086:2a02
Display Server: X.org 1.18.3 drivers: intel (unloaded: modesetting,fbdev,vesa)
tty size: 80x25 Advanced Data: N/A for root
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
Sound: Advanced Linux Sound Architecture v: k4.9.30
Network: Card-1: Intel 82566MM Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: 1840
bus-ID: 00:19.0 chip-ID: 8086:1049
IF: eth1 state: down mac: 00:1c:25:b8:4d:30
Card-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
driver: iwl4965 v: in-tree: bus-ID: 03:00.0 chip-ID: 8086:4230
IF: wlan0 state: up mac: 00:1f:3b:82:7a:d1
Drives: HDD Total Size: 335.6GB (3.3% used)
ID-1: /dev/sda model: Hitachi_HTS54503 size: 320.1GB serial: N/A
ID-2: /dev/sdb model: DataTraveler_3.0 size: 15.5GB serial: N/A
Partition: ID-1: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda8
RAID: System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 186 Uptime: 7 min Memory: 433.5/1959.9MB
Init: SysVinit v: N/A runlevel: 5 Gcc sys: 5.5.0 alt: 5.3.0
Client: Shell (bash 4.3.481 running in urxvt) inxi: 2.3.8

As you can see, my Kernel is 4.9.30 x86_64 (64 bit gcc: 5.3.0).

In my understanding the kernel in the PPM 4.4.157 should be older, or am I wrong?

If not, I'd like to know how to update. Via PPM in downloading kernel-huge, kernel-modules and kernel-headers? Also kernel-source? That's it? Or do I have to execute the change_kernels script? If so, what exactly and where to enter?

Thanks for any help.

regards,
stefan
Back to top
View user's profile Send private message 
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Wed 10 Oct 2018, 14:59    Post subject: Re: slacko-700 rc3  

stefan21 wrote:

As you can see, my Kernel is 4.9.30 x86_64 (64 bit gcc: 5.3.0).


The build that @Sailor did uses the newest 4.9.131 kernel, he supplies the devx and kernel source sfs as well.

It comes with Palemoon but I added Firefox with PPM.

The link to his build is:

http://www.mediafire.com/folder/04k8b8812ccoh/testing

It works well.
Back to top
View user's profile Send private message 
stefan21

Joined: 12 Apr 2013
Posts: 18

PostPosted: Wed 10 Oct 2018, 15:10    Post subject:  

Billtoo,

thank you for your fast reply.

I understand I have to download the devx and the kernel_sources. Running the change_kernels script, drag the files in the appropriate places of the gui, and that's it?

Or click on it and install the sfs?

What are the kernel updates in the PPM good for?

stefan
Back to top
View user's profile Send private message 
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Wed 10 Oct 2018, 15:34    Post subject: slacko-700 rc3  

I downloaded slacko64-6.9.9.9-uefi-k4.4-FF-LO.iso and devx_slacko64_6.9.9.9.sfs this morning from the 1st page of the slacko-700 rc3 thread this morning.
Then updated PPM and ran the Update Notices - Slackware Bug fixes entry in the Setup menu.
Did all the updates, (there are a lot of them) installed some applications with PPM and changed the kernel with one that I compiled with the kernel kit in woof-CE using the change kernel command from the terminal.

I'm happy with the result, done it a few times lately so getting better at it I guess Smile

System: Host: puppypc26061 Kernel: 4.4.159 x86_64 (64 bit) Desktop: JWM 2.3.2 Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: desktop System: Hewlett-Packard product: p7-1246s serial: MXX232077R
Mobo: Foxconn model: 2ADA v: 1.00 BIOS: AMI v: 7.12 date: 06/07/2012
CPU: Quad core Intel Core i5-3550 (-MCP-) speed/max: 1700/3301 MHz
Graphics: Card: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
Display Server: X.org 1.18.3 driver: intel tty size: 177x31 Advanced Data: N/A for root
Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 3031.4GB (0.8% used)
Weather: Conditions: 68 F (20 C) - Partly Cloudy Time: October 10, 3:30 PM EDT
Info: Processes: 189 Uptime: 1:46 Memory: 270.9/11905.5MB Client: Shell (bash) inxi: 2.3.8
screenshot.jpg
 Description   
 Filesize   40.98 KB
 Viewed   801 Time(s)

screenshot.jpg

Back to top
View user's profile Send private message 
stefan21

Joined: 12 Apr 2013
Posts: 18

PostPosted: Wed 10 Oct 2018, 17:48    Post subject:  

Well, I couldn't get the script working.

Anyway, here's what I did: I downloaded and mounted the iso and took the files from there. This seems to work. Little tricky...

# inxi -Fxx
System: Host: puppypc15062 Kernel: 4.9.131 x86_64 (64 bit gcc: 5.5.0)
Desktop: JWM 2.3.6 dm: N/A Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: laptop System: LENOVO product: 6468AL2 v: ThinkPad T61 serial: 6468AL2L3B6436
Mobo: LENOVO model: 6468AL2 serial: VF1GA85H08M
BIOS: LENOVO v: 7LETB0WW (2.10 ) date: 01/21/2008
Chassis: type: 10
Battery BAT0: charge: 55.1 Wh 98.1% condition: 56.2/56.2 Wh (100%)
volts: 12.2/10.8
model: SONY 42T4566 serial: 3159 status: N/A
CPU: Dual core Intel Core2 Duo T7100 (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 ssse3 vmx) bmips: 7182
clock speeds: min/max: 800/1801 MHz 1: 1200 MHz 2: 1200 MHz
Graphics: Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
bus-ID: 00:02.0 chip-ID: 8086:2a02
Display Server: X.org 1.18.3 drivers: intel (unloaded: modesetting,fbdev,vesa)
tty size: 80x25 Advanced Data: N/A for root
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
Sound: Advanced Linux Sound Architecture v: k4.9.131
Network: Card-1: Intel 82566MM Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: 1840
bus-ID: 00:19.0 chip-ID: 8086:1049
IF: eth1 state: down mac: 00:1c:25:b8:4d:30
Card-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
driver: iwl4965 v: in-tree: bus-ID: 03:00.0 chip-ID: 8086:4230
IF: wlan0 state: up mac: 00:1f:3b:82:7a:d1
Drives: HDD Total Size: 335.6GB (3.4% used)
ID-1: /dev/sda model: Hitachi_HTS54503 size: 320.1GB serial: N/A
ID-2: /dev/sdb model: DataTraveler_3.0 size: 15.5GB serial: N/A
ID-1: swap-1 size: 2.15GB used: 0.29GB (14%) fs: swap dev: /dev/sda8
RAID: System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 191 Uptime: 1:13 Memory: 486.9/1959.7MB
Init: SysVinit v: N/A runlevel: 5 Gcc sys: 5.5.0
Client: Shell (bash 4.3.481 running in urxvt) inxi: 2.3.8

Thank's for your help.

regards,
stefan
Back to top
View user's profile Send private message 
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Fri 12 Oct 2018, 07:45    Post subject: slacko-700 rc3  

I downloaded slacko64-6.9.9.9-uefi-k4.4-FF-LO.iso and devx_slacko64_6.9.9.9.sfs this morning from the 1st page of the slacko-700 rc3 thread.
Installed it to the hard drive of Lenovo Desktop.
Updated PPM and ran the Update Notices - Slackware Bug fixes entry in the Setup menu.
Did all the updates,installed some applications with PPM and changed the kernel with one that I compiled with the kernel kit in woof-CE using
the change_kernel script from the terminal,installed the proprietary Nvidia driver.

System: Host: puppypc21166 Kernel: 4.4.160 x86_64 (64 bit) Desktop: JWM 2.3.2 Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: desktop System: LENOVO product: 7491B8U v: ThinkCentre M58e serial: MJ01509
Mobo: LENOVO model: N/A serial: INVALID BIOS: LENOVO v: 5HKT39AUS date: 06/17/2009
CPU: Dual core Intel Core2 Duo E8400 (-MCP-) speed/max: 2336/3003 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.org 1.18.3 driver: nvidia tty size: 183x36 Advanced Data: N/A for root
Network: Card: Marvell 88E8057 PCI-E Gigabit Ethernet Controller driver: sky2
Drives: HDD Total Size: 320.1GB (2.1% used)
Weather: Conditions: 45 F (7 C) - Mostly Cloudy Time: October 12, 7:20 AM EDT
Info: Processes: 154 Uptime: 1:13 Memory: 371.4/3952.9MB Client: Shell (bash) inxi: 2.3.8

Screenshot shows left monitor.

Works well so far.
screenshot.jpg
 Description   
 Filesize   81.57 KB
 Viewed   684 Time(s)

screenshot.jpg

Back to top
View user's profile Send private message 
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Sun 14 Oct 2018, 02:46    Post subject: slacko-700 rc3  

I downloaded slacko-6.9.9.9-uefi-k4.4-PAE-PM-LO.iso and installed it to the hard drive of HP desktop.
Did all the Update Notices - Slackware Bugfixes.
Added applications with PPM,compiled Smplayer/Smtube.
Changed theme to Dark Mouse.
Changed kernel to 4.4.161 pae.

System: Host: puppypc28337 Kernel: 4.4.161 i686 (32 bit) Desktop: JWM 2.3.2 Distro: Slacko Puppy 6.9.9.9
Machine: Device: desktop System: Hewlett-Packard product: HPE-410f serial: MXX0370KF3
Mobo: FOXCONN model: 2AB1 v: 1.00 BIOS: American Megatrends v: 6.02 date: 07/21/2010
CPU: Hexa core AMD Phenom II X6 1045T (-MCP-) speed/max: 800/2700 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570]
Display Server: X.org 1.18.3 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
tty size: 175x31 Advanced Data: N/A for root
Network: Card-1: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 1062.9GB (1.0% used)
Weather: Conditions: 34 F (1 C) Time: October 14, 2:22 AM EDT
Info: Processes: 196 Uptime: 1:18 Memory: 248.4/8092.5MB Client: Shell (bash) inxi: 2.3.8

Added Firefox from the Update Notices and made it the default Browser.
Works well.
-----------------------------------------------------------

EDIT: I did the same as above to a Compaq desktop:

System: Host: puppypc10866 Kernel: 4.4.161-pae i686 (32 bit) Desktop: JWM 2.3.2 Distro: Slacko Puppy 6.9.9.9
Machine: Device: desktop System: Compaq-Presario product: AU194AA-A2L CQ5123F serial: MXX9300M0F
Mobo: MSI model: Boston v: 1.0 BIOS: Phoenix v: 5.24 date: 06/19/2009
CPU: Dual core Pentium E5200 (-MCP-) speed/max: 2000/2500 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV530 [Radeon X1600 PRO]
Display Server: X.org 1.18.3 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
tty size: 160x27 Advanced Data: N/A for root
Network: Card: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 500.1GB (1.3% used)
Weather: Conditions: 48 F (9 C) Time: October 14, 7:38 PM EDT
Info: Processes: 148 Uptime: 1:07 Memory: 220.4/4035.5MB Client: Shell (bash) inxi: 2.3.8

It's working well.
-----------------------------------------------------------------------------

EDIT2 Still working on Compaq desktop install:

System: Host: puppypc10866 Kernel: 4.9.135-pae i686 (32 bit) Desktop: JWM 2.3.2 Distro: Slacko Puppy 6.9.9.9
Machine: Device: desktop System: Compaq-Presario product: AU194AA-A2L CQ5123F serial: MXX9300M0F
Mobo: MSI model: Boston v: 1.0 BIOS: Phoenix v: 5.24 date: 06/19/2009
CPU: Dual core Pentium E5200 (-MCP-) speed/max: 1600/2500 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV530 [Radeon X1600 PRO]
Display Server: X.org 1.18.3 driver: radeon tty size: 154x26 Advanced Data: N/A for root
Network: Card: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 563.2GB (1.7% used)
Weather: Conditions: 36 F (2 C) - Mostly Cloudy Time: October 21, 7:46 AM EDT
Info: Processes: 160 Uptime: 1:58 Memory: 222.3/4034.5MB Client: Shell (bash) inxi: 2.3.8

I managed to compile MC-4.8.21 + dependencies.
Changed the kernel again.
screenshot2.jpg
 Description   
 Filesize   59.97 KB
 Viewed   236 Time(s)

screenshot2.jpg

Compaq.jpg
 Description   
 Filesize   57.15 KB
 Viewed   509 Time(s)

Compaq.jpg


Last edited by Billtoo on Sun 21 Oct 2018, 08:28; edited 2 times in total
Back to top
View user's profile Send private message 
Billtoo


Joined: 07 Apr 2009
Posts: 3599
Location: Ontario Canada

PostPosted: Tue 16 Oct 2018, 06:59    Post subject: slacko-700 rc3  

I downloaded and updated slacko64-6.9.9.9-uefi-k4.4-FF-LO.iso
Added applications with PPM,changed theme to dark mouse,compiled Smplayer/Smtube,Changed kernel:

System: Host: puppypc22236 Kernel: 4.14.76-x86_64 x86_64 (64 bit) Desktop: JWM 2.3.2
Distro: Slacko64 Puppy 6.9.9.9
Machine: Device: desktop System: Compaq-Presario product: AU194AA-A2L CQ5123F serial: MXX9300M0F
Mobo: MSI model: Boston v: 1.0 BIOS: Phoenix v: 5.24 date: 06/19/2009
CPU: Dual core Pentium E5200 (-MCP-) speed/max: 1197/2500 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV530 [Radeon X1600 PRO]
Display Server: X.org 1.18.3 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
tty size: 157x29 Advanced Data: N/A for root
Network: Card: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 500.1GB (1.3% used)
Weather: Conditions: 37 F (3 C) - Clear Time: October 16, 6:45 AM EDT
Info: Processes: 83 Uptime: 36 min Memory: 187.7/3952.0MB Client: Shell (bash) inxi: 2.3.8

Streaming video works well in Kodi,some tearing in Vlc.

I like it Smile
--------------------------------------------------------------------
EDIT: I changed the kernel,no tearing in streaming videos now:

video-info-glx 1.5.3 Sat 20 Oct 2018 on Slacko64 Puppy 6.9.9.9 Linux 4.14.78-x86_64 x86_64
0.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 PRO]

X Server: Xorg Driver: radeon
X.Org version: 1.18.3
dimensions: 3200x900 pixels (846x238 millimeters)
depth of root window: 24 planes

direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV530
OpenGL version string: 2.1 Mesa 11.2.2

Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
Core 0: @1285 1: @1359 MHz
screenshot2.jpg
 Description   
 Filesize   74.26 KB
 Viewed   259 Time(s)

screenshot2.jpg

screenshot.jpg
 Description   
 Filesize   59.53 KB
 Viewed   463 Time(s)

screenshot.jpg


Last edited by Billtoo on Sat 20 Oct 2018, 06:16; edited 1 time in total
Back to top
View user's profile Send private message 
Sailor Enceladus

Joined: 22 Feb 2016
Posts: 1547

PostPosted: Wed 17 Oct 2018, 09:37    Post subject:  

foxpup wrote:
Sailor Enceladus wrote:
I tried another Slacko64 woof-CE build on my dad's Core2Duo laptop today

http://www.mediafire.com/folder/04k8b8812ccoh/testing

It has Palemoon 28.1 and Abi/Gnumeric in the adrv and kernel 4.9 with linux-firmware (default options) in zdrv.
Hello Sailor, thanks for this build. I tried it on my recent i5 laptop.
It takes a lot of time to get to X after all is loaded. It waits for a minute or more on a black screen with just a cursor on left top corner. It may need a few keystrokes to continue, at least that is what I do: hit a few keys.
I changed to kernel and zdrv.sfs from the build of micko and that boots up fine.
Strange, because that is almost the same kernel.
I had to do the same with the previous build you offered.
Maybe it has something to do with the Core2Duo laptop you built it for and with.

I works very well otherwise. Still have to find another bug. Wink

Thanks foxpup. If you ever find out the difference between the kernels that is causing the problem I would love to know. I wonder if the output of the commands in "Known Issues" 01micko wrote in the first post will give any clues. I did have a hang in a few kernels because my wifi driver was missing, I think wdlkmpx has made a workaround for this since though.
Back to top
View user's profile Send private message 
sszindian


Joined: 24 Apr 2010
Posts: 773
Location: Pennsylvania U.S.

PostPosted: Wed 24 Oct 2018, 21:31    Post subject: Slack0 64bit  

Hi Sailor Enceladus!

Using your Slack0 64 build with the- 4.9.131 kernel... very impressive indeed over the original 6.9.9 !!! 'Nice work'

So far in testing, only thing I can't seem to get is Pwidgets to show on the desktop? Appreciate any help with that.
EDIT: Found the simple fix myself... Make Sure Your Pwidgets Is A 64bit Version!!!

'thanks'

>>>---Indian------>

_________________
Cloud Computing For Every Puppy (a .pet)
http://murga-linux.com/puppy/viewtopic.php?t=69192

Last edited by sszindian on Mon 05 Nov 2018, 20:09; edited 1 time in total
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 31 of 32 [471 Posts]   Goto page: Previous 1, 2, 3, ..., 29, 30, 31, 32 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Puppy Projects
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1742s ][ Queries: 13 (0.0524s) ][ GZIP on ]