TazPuppy 5.0 rc2
-
- Posts: 247
- Joined: Fri 31 Jan 2014, 14:12
Testing version 16
My first-time user comments.
While testing version 16 installed to a USB Sandisk Cruzer Edge,
I noted that booting after the savefile process;
"Keyboard Layout Handler Settings"
country flags have disappeared, leaving in my case GB text only.
Midori is hopeless, TazWeb browser isn't much better and has
best described as, unrefined sticky page issues with bookmarks.
So from the on-demand features, I downloaded Firefox 17.0.11 esr
and VLC which run ok.
Just a pity being an elderly Firefox, due to lack of feature-support, U-Tube can't run.
I run world radio-station playlists and VLC makes a good job
of handling those lists to a stereo hi-fi system.
IceCast stations works ok too.
Otherwise overall, a nice tidy small distro - well done,
but needs consistent work to keep it modern and up to date.
Best regards.
While testing version 16 installed to a USB Sandisk Cruzer Edge,
I noted that booting after the savefile process;
"Keyboard Layout Handler Settings"
country flags have disappeared, leaving in my case GB text only.
Midori is hopeless, TazWeb browser isn't much better and has
best described as, unrefined sticky page issues with bookmarks.
So from the on-demand features, I downloaded Firefox 17.0.11 esr
and VLC which run ok.
Just a pity being an elderly Firefox, due to lack of feature-support, U-Tube can't run.
I run world radio-station playlists and VLC makes a good job
of handling those lists to a stereo hi-fi system.
IceCast stations works ok too.
Otherwise overall, a nice tidy small distro - well done,
but needs consistent work to keep it modern and up to date.
Best regards.
TazPuppy beta 17 released
Changes:
* A CRITICAL BUG in tazpet installer where xz compressed pet packages failed to extract IS FIXED.
* Some tweaks
Download: https://drive.google.com/file/d/1yvtxIF ... sp=sharing
MD5 Checksum: fcc5113a775110b63c09a6a4231b688c
Build kit: https://drive.google.com/file/d/11oQLbo ... sp=sharing
Changes:
* A CRITICAL BUG in tazpet installer where xz compressed pet packages failed to extract IS FIXED.
* Some tweaks
Download: https://drive.google.com/file/d/1yvtxIF ... sp=sharing
MD5 Checksum: fcc5113a775110b63c09a6a4231b688c
Build kit: https://drive.google.com/file/d/11oQLbo ... sp=sharing
TazPuppy Beta 18 released
Changes:
* Dynamic Machine ID and Dynamic MAC address (Both enable by default but it can toggle ON and OFF (under Network Privacy Settings. Reboot required to apply the settings)
Download: https://drive.google.com/file/d/1kBw600 ... sp=sharing
MD5 Checksum: c9a120c4f8f353d5f89f340f4f21c691
Build kit: https://drive.google.com/file/d/1dchNmF ... sp=sharing
Changes:
* Dynamic Machine ID and Dynamic MAC address (Both enable by default but it can toggle ON and OFF (under Network Privacy Settings. Reboot required to apply the settings)
Download: https://drive.google.com/file/d/1kBw600 ... sp=sharing
MD5 Checksum: c9a120c4f8f353d5f89f340f4f21c691
Build kit: https://drive.google.com/file/d/1dchNmF ... sp=sharing
to Mistfire
Would you check this script...
https://fossies.org/linux/gtkdialog/exa ... _functions to see if DIALOG will appear.
The previous script I listed didn't copy correctly in the windows clipboard I guess.
Would you check this script...
https://fossies.org/linux/gtkdialog/exa ... _functions to see if DIALOG will appear.
The previous script I listed didn't copy correctly in the windows clipboard I guess.
@don570
replace this line
with this one
replace this line
Code: Select all
*) $GTKDIALOG --program=MAIN_DIALOG ;;
Code: Select all
*) $GTKDIALOG --center --program=MAIN_DIALOG ;;
I discovered what is wrong....
You need to get the more recent version of gtkdialog
I dragged over the version from the recent dpup stretch 7.5 32 bit
version and that upgraded tazpup to gtkdialog version 8.4.
http://www.murga-linux.com/puppy/viewtopic.php?t=112125
Then I checked the launch button and it works now.
By the way DIALOG is the function that the button launches.
Thunor wrote the script.
____________________________________________________
I assume radky got gtkdialog from HERE
Now ptmtimer log feature works.
___________________________________________
You need to get the more recent version of gtkdialog
Code: Select all
root@TazPuppy:~# gtkdialog -v
(process:16323): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
gtkdialog version 0.8.2 release (C) 2003-2007 Laszlo Pere, 2011-2012 Thunor
Built with additional support for: Glade, VTE.
I dragged over the version from the recent dpup stretch 7.5 32 bit
version and that upgraded tazpup to gtkdialog version 8.4.
http://www.murga-linux.com/puppy/viewtopic.php?t=112125
Then I checked the launch button and it works now.
By the way DIALOG is the function that the button launches.
Thunor wrote the script.
____________________________________________________
I assume radky got gtkdialog from HERE
Now ptmtimer log feature works.
Code: Select all
root@TazPuppy:~# gtkdialog -v
(process:16722): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
gtkdialog version 0.8.4 release (C) 2003-2007 Laszlo Pere, 2011-2012 Thunor
Built with support for: GTK+ 2, Glade, VTE.
Also various default apps that BarryK supports need to be setup.
Code: Select all
defaultaudioplayer
-sh: defaultaudioplayer: command not found
root@TazPuppy:~# defaulttexteditor
/usr/local/bin/defaulttexteditor: line 2: exec: beaver: not found
TazPuppy beta 19 released
Changes:
* Added support for older pet packages. (Pre-woof era packages dated 2009 below)
* gtkdialog 0.8.4 is now used.
* defaulttextviewer and defaulttexteditor is fixed
Download: https://drive.google.com/file/d/1WRe-Yz ... sp=sharing
MD5 Checksum: ded2abcd7f5005ce6924d7c86beb9704
Build kit: https://drive.google.com/file/d/1sgE-_u ... sp=sharing
Changes:
* Added support for older pet packages. (Pre-woof era packages dated 2009 below)
* gtkdialog 0.8.4 is now used.
* defaulttextviewer and defaulttexteditor is fixed
Download: https://drive.google.com/file/d/1WRe-Yz ... sp=sharing
MD5 Checksum: ded2abcd7f5005ce6924d7c86beb9704
Build kit: https://drive.google.com/file/d/1sgE-_u ... sp=sharing
Quick test Tazpuppy R19
Hi Mistfire,
First of all : congratulations to you (and Wiak) for this new puppy.
It is a puppy in all it's glory: small at 100Mbyte, a lot of functionality that works. This is amazing. As to my knowledge ThinSlacko was the last puppy under 100Mbyte. There where some barebones that where smaller, but as soon as you added the browser...holalala...
In absence of my formidable EEEpc, I tested TazPuppy on a patched Chromebook (Acer C720).
The amazing things are:
- WIFI works (ath9)
- Touchpad works (that is super).
Most of the apps in the menu work, but the menu is not very structured (i.e. the spreadsheet is not under Office, but under Utilities).
I have one hardware issue though: I do not seem to have audio. (Intel Audio).
Besides that, the backlight cannot be controlled. But that one is easy to fix, done that before.
Congratulations on this miraculous puppy.....
Regards,
Volhout
First of all : congratulations to you (and Wiak) for this new puppy.
It is a puppy in all it's glory: small at 100Mbyte, a lot of functionality that works. This is amazing. As to my knowledge ThinSlacko was the last puppy under 100Mbyte. There where some barebones that where smaller, but as soon as you added the browser...holalala...
In absence of my formidable EEEpc, I tested TazPuppy on a patched Chromebook (Acer C720).
The amazing things are:
- WIFI works (ath9)
- Touchpad works (that is super).
Most of the apps in the menu work, but the menu is not very structured (i.e. the spreadsheet is not under Office, but under Utilities).
I have one hardware issue though: I do not seem to have audio. (Intel Audio).
Besides that, the backlight cannot be controlled. But that one is easy to fix, done that before.
Congratulations on this miraculous puppy.....
Regards,
Volhout
My Dell laptop is dead at the moment, so I've had to resurrect my wife's 10 year old retired laptop to use temporarily. I had increased the RAM to 4GB when my wife used to use it, so with puppy it is quite snappy. I found a bootable USB flash drive that had Legacy Grub installed, so decided to install tazpuppy beta 19 on it. This is a new manual frugal install, to 8GB Kingston DataTraveller USB Flash drive. I've manually installed palemoon in /opt. Running very smoothly on this old laptop.
So, thanks mistfire, this is once again excellent work.
So, thanks mistfire, this is once again excellent work.
Code: Select all
sh-4.4$ inxi -Fxz
System: Host: TazPuppy Kernel: 4.9.124-slim32 i686 (32 bit gcc: 5.3.0)
Desktop: N/A Distro: 5.0
Machine: System: Acer (portable) product: Extensa 4630Z v: V1.23
Mobo: Acer model: Extensa 4630Z v: V1.23
Bios: Acer v: V1.23 date: 03/11/2009
Battery BAT0: charge: 0.7 Wh 2.0% condition: 34.5/44.0 Wh (79%)
model: Simplo GARDA71 status: N/A
CPU: Dual core Pentium T4200 (-MCP-) cache: 1024 KB
flags: (lm nx pae sse sse2 sse3 ssse3) bmips: 7980
clock speeds: max: 2000 MHz 1: 2000 MHz
2: 1600 MHz
Graphics: Card: Intel Mobile 4 Series Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.org 1.12.4 drivers: (unloaded: fbdev,vesa)
Resolution: 80x24
Audio: Card Intel 82801I (ICH9 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: ALSA v: k4.9.124-slim32
Network: Card-1: Intel Ultimate N WiFi Link 5300
driver: iwlwifi bus-ID: 04:00.0
IF: wlan0 state: up
mac: <filter>
Card-2: Broadcom NetXtreme BCM5764M Gigabit Ethernet PCIe
driver: tg3 v: 3.137
bus-ID: 05:00.0
IF: eth0 state: down
mac: <filter>
Drives: HDD Total Size: 168.1GB (39.1% used)
ID-1: /dev/sda model: WDC_WD1600BEVT size: 160.0GB
ID-2: USB /dev/sdb model: DataTraveler_3.0 size: 8.0GB
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 194 Uptime: 1:07 Memory: 275.5/3977.7MB
Init: SysVinit runlevel: 5
Gcc sys: N/A
Client: Shell (sh) inxi: 2.3.0
@don570 could you also please test gtkdialog scripts by installing gtkdialog 0.8.3 from slitaz repo. To see if there is weird rendering of dialog. As of now the default gtkdialog used in latest tazpuppy is 0.8.4 from a pet package. I wonder it was fixed at 0.8.3 I test pfind using gtkdialog 0.8.3 and it worked nicely for me.
slitaz has a very old source version of gtkdialog....
http://distro.ibiblio.org/slitaz/source ... .20.tar.gz
___________________________________
They have
http://distro.ibiblio.org/slitaz/packag ... _64.tazpkg
I'll test it for you.
From my experience there is very little difference between version 0.8.3 and 0.8.4 . In fact developers didn't even notice the difference.
_______________________________________
http://distro.ibiblio.org/slitaz/source ... .20.tar.gz
___________________________________
They have
http://distro.ibiblio.org/slitaz/packag ... _64.tazpkg
I'll test it for you.
From my experience there is very little difference between version 0.8.3 and 0.8.4 . In fact developers didn't even notice the difference.
_______________________________________
There's a script 'Simple Samba Management' that is popular with puppy users
http://www.murga-linux.com/puppy/viewto ... 005#896005
I wonder if it can be used in tazpup??
_________________________________________
http://www.murga-linux.com/puppy/viewto ... 005#896005
I wonder if it can be used in tazpup??
_________________________________________
Tazpup recognized my devices nicely . I could set up wifi by just
filling in password.
________________________________________
I booted a frugal install pfix=ram
Here are my boot messages. You can see it recognized my wifi adaptor.
______________________________________________________
filling in password.
________________________________________
I booted a frugal install pfix=ram
Here are my boot messages. You can see it recognized my wifi adaptor.
______________________________________________________
- Attachments
-
- boot-messages.tar.gz
- (4.51 KiB) Downloaded 60 times
Audio worked right away and ethernet connect was recognized automatically.
gave leafpad
I noticed that nano is installed. 'mp' is the editor that barryK uses.
_____________________________________________________
Code: Select all
echo $EDITOR
I noticed that nano is installed. 'mp' is the editor that barryK uses.
_____________________________________________________
When I tried to compile with the devx
https://archive.org/download/Puppy_Linu ... tazpup.sfs
I got terminal message...
https://archive.org/download/Puppy_Linu ... tazpup.sfs
I got terminal message...
Code: Select all
sh-4.4# ./configure --prefix=/usr
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for -Werror in CFLAGS (It breaks tests)... no
checking if you are up to something totally static with LDFLAGS/CFLAGS... no
checking for style of include used by make... GNU
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/root/mpg123-1.25.10':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details
sh-4.4# make
make: *** No targets specified and no makefile found. Stop.
sh-4.4#