Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Fri 24 Jan 2020, 06:50
All times are UTC - 4
 Forum index » Advanced Topics » Puppy Projects
Raspberry Pi Buster Raspup
Moderators: Flash, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 9 of 12 [179 Posts]   Goto page: Previous 1, 2, 3, ..., 7, 8, 9, 10, 11, 12 Next
Author Message
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Wed 04 Dec 2019, 21:27    Post subject:  

Samba worked well .connecting to a network server was easy...
either clicking on network icon or command in terminal
Code:

# smbclient -L 192.168.1.106
Enter WORKGROUP\root's password:

   Sharename       Type      Comment
   ---------       ----      -------
   Downloads       Disk     
   IPC$            IPC       IPC Service (Samba 4.7.8)
Reconnecting with SMB1 for workgroup listing.

   Server               Comment
   ---------            -------

   Workgroup            Master
   ---------            -------
                        CISCO99987
   WORKGROUP            FATDOG64-567
# mount-FULL -t cifs //192.168.1.106/Downloads /root/samba-sharefolder -o guest



However when there is shutdown of the computer there was a strange wait of
couple minutes , then the shutdown proceeded properly. Rolling Eyes
____________________________________________________
Back to top
View user's profile Send private message 
Sage

Joined: 04 Oct 2005
Posts: 5511
Location: GB

PostPosted: Thu 05 Dec 2019, 05:26    Post subject:  

Quote:
It needs to formatted by linux machine using gparted.
because of two partitions,

I used micko's GUI method to be sure but the subsequent start-up procedures are tedious, too.

Separately, wouldn't it be great if micko could spare a little time to drive slacko to v.7! v6.9.9.9.9.9.... is still the best utility to run for diagnoses, etc....
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Thu 05 Dec 2019, 19:36    Post subject:  

When I tried to use YASSM (to explore the network) there was warning message that arpscan wasn't installed.
____________________________________________________

To make ssh work I had to install dropbear pet package.
__________________________________________________
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Sat 07 Dec 2019, 13:44    Post subject: arp-scan and mtpaint  

I was able to get yassm to work by install dropbear and then arp-scan
I compiled arp-scan with the devx SFS

Available:
arp-scan-1.9.7-arm7.pet
https://drive.google.com/open?id=14nvdBI_mw8rxO7V5ie6IDnL8hSyZjb75
__________________________________________

Also I was able to compile latest mtpaint 3.49.19
./configure intl --prefix=/usr
Available:
mtpaint-3.49.19-arm7.pet
https://drive.google.com/open?id=1E1a7-O8af10f7ZPe89yefekzhlFweidK

________________________________
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Sun 08 Dec 2019, 16:56    Post subject:  

The solution to connecting to raspberry pi buster from fatdog64

instead of ssh -X root@$IP_ADDRESS
I was successful with


Code:
ssh -Y root@$IP_ADDRESS

________________________________________

ogg format sound files would work

_____________________________________

Unfortunately mpg123 or mpg321 is not included so I couldn't
play mp3 files with ptmtimer.
________________________________________

To output the audio to the analog jack , edit config.txt file to contain...
Code:
hdmi_ignore_edid_audio=1


_____________________________
Back to top
View user's profile Send private message 
tony

Joined: 14 Jan 2006
Posts: 335
Location: Montreal.ca

PostPosted: Mon 09 Dec 2019, 14:30    Post subject: rpi4 headless  

Hi All,

I am awaiting my rpi4.

Ideally I would like to run it headless from my Ipad.

Has anybody done this who could post details.

Regards Tony.
Back to top
View user's profile Send private message 
Lobster
Official Crustacean


Joined: 04 May 2005
Posts: 15578
Location: Paradox Realm

PostPosted: Tue 10 Dec 2019, 01:16    Post subject: Re: rpi4 headless  

tony wrote:

Ideally I would like to run it headless from my Ipad.
Has anybody done this who could post details.


You might have to become an ipados developer or jailbreak your Ipad

or ...
http://osxdaily.com/2018/12/11/ish-linux-shell-ios/

Another way might be with a browser. Not sure what else to suggest.
I wish you luck, my efforts in this direction were not successful as I no longer have the determined perseverance required ...

_________________
Puppy Raspup 8.2 Final Cool
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html Very Happy
Back to top
View user's profile Send private message Visit poster's website 
Dud

Joined: 04 Jun 2011
Posts: 55

PostPosted: Tue 10 Dec 2019, 11:51    Post subject:
Subject description: Headless
 

I've not tried with an iPad but VNC and SSH work fine on Android and there are clients for ios.

You may need a display while you're setting up.

I've had a couple of Pi's running continuously as servers for several years now - attach an ssd and it's a really cheap way to run NAS. If you have a mix of machines on your network you might smooth transfers by having Samba and FTP servers serve the same directories.

Hth.
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Tue 10 Dec 2019, 15:35    Post subject:  

Tony wrote:
Ideally I would like to run it headless from my Ipad.

Has anybody done this who could post details.


Ipad would have to be totally ssh compatible?? Not sure if it is???
This program claims it is.
https://apps.apple.com/us/app/termius-ssh-client/id549039908

I spent yesterday listening to music on my headless raspberry pi 3 Buster B+
I control raspberry with a DELL computer running fatdog64

Some instructions:

devx SFS needs to be loaded to compile (right click on file to load)
https://distro.ibiblio.org/puppylinux/arm/puppy-raspup-8.1.3/devx_raspup_8.1.3.sfs

I suggest you install mpg123
mpg123-1.25.13.tar.bz2 from HERE

It compiles simply with
Code:
./configure  --prefix=/usr


and install playmusic script (install instructions are inside package)
https://code.google.com/archive/p/gtkdialog/downloads

Make a folder called Music in /mnt/home/ and put mp3 files in it

Install dropbear package
https://distro.ibiblio.org/puppylinux/arm/pet_packages-buster/dropbear-2019.78-armv7l_rb82.pet


Make sure wireless is working --> check with a reboot!!
'ifconfig' command in terminal will show the address of raspberrypi


Modify boot.txt file in your SD card so that default is your save file.
(That puts your save file to the top of list rather than bottom)


config.txt file should have line to output audio to analog...
Code:
hdmi_ignore_edid_audio=1


Your raspberry pi is now an SSH server.
You can reach it from another PC on a network...

Code:
ssh -Y  root@serveraddress


where the serveraddress is the raspberrypi address
PASSWORD=woofwoof

playmusic script will play the folder of mp3 files one after another.

_____________________________________________

If you don't want to use X windows , there are scripts to play a folder of
audio files without a GUI.

Quote:
mpg123 has no frills. Just go to the folder containing the MP3 files that you want to play and type mpg123 *.mp3. You can also load a playlist file and use the *-z* option on the command line to shuffle the tracks you want to play.

_________________________________________________
Back to top
View user's profile Send private message 
Polivko

Joined: 20 Nov 2019
Posts: 9

PostPosted: Tue 10 Dec 2019, 20:21    Post subject:  

01micko,
Any updates from viewing logs from Raspbian and Raspup? Is there any possibility to fix the camera drivers loading? Thank you.
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Thu 12 Dec 2019, 12:53    Post subject:  

Also useful if running without X windows is the script mkplaylist.
It quickly makes a playlist that can then be used by another program like mpg123.

Found inside the pet package ffconvert by shinoba
http://shino.pos.to/linux/puppy/ffconvert-1.4.pet

Quote:
# mkplaylist --help
mkplaylist 0.1
Make play list of multimedia files in a directory.
usage: mkplaylist [PLAYLIST_FORM] (FILES|-f FILELIST)
PLAYLIST_FORM: 'asx', 'pls' or 'm3u'

____________________________________________
Back to top
View user's profile Send private message 
Dud

Joined: 04 Jun 2011
Posts: 55

PostPosted: Mon 16 Dec 2019, 14:18    Post subject:
Subject description: Wireless after firmware update
 

Now here's a thing:

I upgraded the PI4 4GB firmware after reading an article in the latest MagPi

Using Raspbian:
sudo apt update
sudo apt full-upgrade

and then reboot.

Then I returned to Raspup to see if there were any significant changes

I only found one so far:

Using wireless -

PING 192.168.1.254 (192.168.1.254): 56 data bytes
64 bytes from 192.168.1.254: seq=0 ttl=64 time=3.425 ms
64 bytes from 192.168.1.254: seq=1 ttl=64 time=2.708 ms
64 bytes from 192.168.1.254: seq=2 ttl=64 time=3.846 ms
64 bytes from 192.168.1.254: seq=3 ttl=64 time=7.933 ms
64 bytes from 192.168.1.254: seq=4 ttl=64 time=2.339 ms
64 bytes from 192.168.1.254: seq=5 ttl=64 time=7.405 ms
64 bytes from 192.168.1.254: seq=6 ttl=64 time=2.431 ms
64 bytes from 192.168.1.254: seq=7 ttl=64 time=2.588 ms
64 bytes from 192.168.1.254: seq=8 ttl=64 time=6.354 ms
64 bytes from 192.168.1.254: seq=9 ttl=64 time=5.736 ms
64 bytes from 192.168.1.254: seq=10 ttl=64 time=6.476 ms
64 bytes from 192.168.1.254: seq=11 ttl=64 time=4.897 ms
64 bytes from 192.168.1.254: seq=12 ttl=64 time=6.139 ms
64 bytes from 192.168.1.254: seq=13 ttl=64 time=7.961 ms
64 bytes from 192.168.1.254: seq=14 ttl=64 time=2.147 ms
64 bytes from 192.168.1.254: seq=15 ttl=64 time=3.101 ms
64 bytes from 192.168.1.254: seq=16 ttl=64 time=4.045 ms
64 bytes from 192.168.1.254: seq=17 ttl=64 time=1.795 ms
64 bytes from 192.168.1.254: seq=18 ttl=64 time=4.556 ms
64 bytes from 192.168.1.254: seq=19 ttl=64 time=3.675 ms

--- 192.168.1.254 ping statistics ---
20 packets transmitted, 20 packets received, 0% packet loss
round-trip min/avg/max = 1.795/4.477/7.961 ms

Whilst not perfect this is vastly better than the times I was getting before (upthread) and is good enough to stream a dvd image without glitches.

So it looks like most of the problem was outside your remit Micko - sorry for the headaches.

But it does raise the need to keep the firmware current

Cheerio,
Back to top
View user's profile Send private message 
linux28

Joined: 05 Apr 2009
Posts: 238

PostPosted: Fri 27 Dec 2019, 06:57    Post subject:  

Debian-Pi-Aarch64 puppy?

Is there a 64-bit puppy?
Back to top
View user's profile Send private message 
tony

Joined: 14 Jan 2006
Posts: 335
Location: Montreal.ca

PostPosted: Mon 30 Dec 2019, 11:18    Post subject:
Subject description: noobs - Raspup needs it.
 

Hi,

I have given up for now, the idea 0f running Rpi4 headless.

I am now using my old Canadian TV as a monitor.

In Noobs.
Cured the black screen at boot by pressing the 2 key.

Depending on your country, pressing 1 or 2 or 3 or 4 should give you a picture.

Editing config.txt will bring the screen to the correct size.

In puppy noobs there should be extra keys to resize the screen and one other to shut the program down in an orderly fashion.

I enclose the config.txt file I am using now. it still needs editing to get the screen size right. but it's a start.

Regards Tony.
config.txt.zip
Description 
zip

 Download 
Filename  config.txt.zip 
Filesize  1.77 KB 
Downloaded  15 Time(s) 
Back to top
View user's profile Send private message 
don570


Joined: 10 Mar 2010
Posts: 5456
Location: Ontario

PostPosted: Tue 31 Dec 2019, 13:07    Post subject:  

The config.txt file included in Raspberry Pi Buster Raspup RC worked well for me.
I didn't have to insert hdmi_mode and hdmi_group
___________________________________________________

I looked at your config.txt file and I saw...

Code:
hdmi_safe=1


You need to comment this line.

Then you set hdmi_mode and hdmi_group.

https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
_______________________________

Here is relevant info

Quote:
hdmi_mode defines screen resolution in CEA or DMT format (for other modes not listed here have a look at this thread)

These values are valid if hdmi_group=1 (CEA)
hdmi_mode=1 VGA
hdmi_mode=2 480p 60 Hz
hdmi_mode=3 480p 60 Hz H
hdmi_mode=4 720p 60 Hz
hdmi_mode=5 1080i 60 Hz
hdmi_mode=6 480i 60 Hz
hdmi_mode=7 480i 60 Hz H
hdmi_mode=8 240p 60 Hz
hdmi_mode=9 240p 60 Hz H
hdmi_mode=10 480i 60 Hz 4x
hdmi_mode=11 480i 60 Hz 4x H
hdmi_mode=12 240p 60 Hz 4x
hdmi_mode=13 240p 60 Hz 4x H
hdmi_mode=14 480p 60 Hz 2x
hdmi_mode=15 480p 60 Hz 2x H
hdmi_mode=16 1080p 60 Hz
hdmi_mode=17 576p 50 Hz
hdmi_mode=18 576p 50 Hz H
hdmi_mode=19 720p 50 Hz
hdmi_mode=20 1080i 50 Hz
hdmi_mode=21 576i 50 Hz
hdmi_mode=22 576i 50 Hz H
hdmi_mode=23 288p 50 Hz
hdmi_mode=24 288p 50 Hz H
hdmi_mode=25 576i 50 Hz 4x
hdmi_mode=26 576i 50 Hz 4x H
hdmi_mode=27 288p 50 Hz 4x
hdmi_mode=28 288p 50 Hz 4x H
hdmi_mode=29 576p 50 Hz 2x
hdmi_mode=30 576p 50 Hz 2x H
hdmi_mode=31 1080p 50 Hz
hdmi_mode=32 1080p 24 Hz
hdmi_mode=33 1080p 25 Hz
hdmi_mode=34 1080p 30 Hz
hdmi_mode=35 480p 60 Hz 4x
hdmi_mode=36 480p 60 Hz 4xH
hdmi_mode=37 576p 50 Hz 4x
hdmi_mode=38 576p 50 Hz 4x H
hdmi_mode=39 1080i 50 Hz reduced blanking
hdmi_mode=40 1080i 100 Hz
hdmi_mode=41 720p 100 Hz
hdmi_mode=42 576p 100 Hz
hdmi_mode=43 576p 100 Hz H
hdmi_mode=44 576i 100 Hz
hdmi_mode=45 576i 100 Hz H
hdmi_mode=46 1080i 120 Hz
hdmi_mode=47 720p 120 Hz
hdmi_mode=48 480p 120 Hz
hdmi_mode=49 480p 120 Hz H
hdmi_mode=50 480i 120 Hz
hdmi_mode=51 480i 120 Hz H
hdmi_mode=52 576p 200 Hz
hdmi_mode=53 576p 200 Hz H
hdmi_mode=54 576i 200 Hz
hdmi_mode=55 576i 200 Hz H
hdmi_mode=56 480p 240 Hz
hdmi_mode=57 480p 240 Hz H
hdmi_mode=58 480i 240 Hz
hdmi_mode=59 480i 240 Hz H
H means 16:9 variant (of a normally 4:3 mode).
2x means pixel doubled (that is, higher clock rate, with each pixel repeated twice)
4x means pixel quadrupled (that is, higher clock rate, with each pixel repeated four times)
These values are valid if hdmi_group=2 (DMT)
Note: according to http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=20155&p=195417&hilit=2560x1600#p195443
there is a pixel clock limit which means the highest supported mode is 1920x1200 @60 Hz with reduced blanking.
hdmi_mode=1 640x350 85 Hz
hdmi_mode=2 640x400 85 Hz
hdmi_mode=3 720x400 85 Hz
hdmi_mode=4 640x480 60 Hz
hdmi_mode=5 640x480 72 Hz
hdmi_mode=6 640x480 75 Hz
hdmi_mode=7 640x480 85 Hz
hdmi_mode=8 800x600 56 Hz
hdmi_mode=9 800x600 60 Hz
hdmi_mode=10 800x600 72 Hz
hdmi_mode=11 800x600 75 Hz
hdmi_mode=12 800x600 85 Hz
hdmi_mode=13 800x600 120 Hz
hdmi_mode=14 848x480 60 Hz
hdmi_mode=15 1024x768 43 Hz DO NOT USE
hdmi_mode=16 1024x768 60 Hz
hdmi_mode=17 1024x768 70 Hz
hdmi_mode=18 1024x768 75 Hz
hdmi_mode=19 1024x768 85 Hz
hdmi_mode=20 1024x768 120 Hz
hdmi_mode=21 1152x864 75 Hz
hdmi_mode=22 1280x768 Reduced blanking
hdmi_mode=23 1280x768 60 Hz
hdmi_mode=24 1280x768 75 Hz
hdmi_mode=25 1280x768 85 Hz
hdmi_mode=26 1280x768 120 Hz Reduced blanking
hdmi_mode=27 1280x800 Reduced blanking
hdmi_mode=28 1280x800 60 Hz
hdmi_mode=29 1280x800 75 Hz
hdmi_mode=30 1280x800 85 Hz
hdmi_mode=31 1280x800 120 Hz Reduced blanking
hdmi_mode=32 1280x960 60 Hz
hdmi_mode=33 1280x960 85 Hz
hdmi_mode=34 1280x960 120 Hz Reduced blanking
hdmi_mode=35 1280x1024 60 Hz
hdmi_mode=36 1280x1024 75 Hz
hdmi_mode=37 1280x1024 85 Hz
hdmi_mode=38 1280x1024 120 Hz Reduced blanking
hdmi_mode=39 1360x768 60 Hz
hdmi_mode=40 1360x768 120 Hz Reduced blanking
hdmi_mode=41 1400x1050 Reduced blanking
hdmi_mode=42 1400x1050 60 Hz
hdmi_mode=43 1400x1050 75 Hz
hdmi_mode=44 1400x1050 85 Hz
hdmi_mode=45 1400x1050 120 Hz Reduced blanking
hdmi_mode=46 1440x900 Reduced blanking
hdmi_mode=47 1440x900 60 Hz
hdmi_mode=48 1440x900 75 Hz
hdmi_mode=49 1440x900 85 Hz
hdmi_mode=50 1440x900 120 Hz Reduced blanking
hdmi_mode=51 1600x1200 60 Hz
hdmi_mode=52 1600x1200 65 Hz
hdmi_mode=53 1600x1200 70 Hz
hdmi_mode=54 1600x1200 75 Hz
hdmi_mode=55 1600x1200 85 Hz
hdmi_mode=56 1600x1200 120 Hz Reduced blanking
hdmi_mode=57 1680x1050 Reduced blanking
hdmi_mode=58 1680x1050 60 Hz
hdmi_mode=59 1680x1050 75 Hz
hdmi_mode=60 1680x1050 85 Hz
hdmi_mode=61 1680x1050 120 Hz Reduced blanking
hdmi_mode=62 1792x1344 60 Hz
hdmi_mode=63 1792x1344 75 Hz
hdmi_mode=64 1792x1344 120 Hz Reduced blanking
hdmi_mode=65 1856x1392 60 Hz
hdmi_mode=66 1856x1392 75 Hz
hdmi_mode=67 1856x1392 120 Hz Reduced blanking
hdmi_mode=68 1920x1200 Reduced blanking
hdmi_mode=69 1920x1200 60 Hz
hdmi_mode=70 1920x1200 75 Hz
hdmi_mode=71 1920x1200 85 Hz
hdmi_mode=72 1920x1200 120 Hz Reduced blanking
hdmi_mode=73 1920x1440 60 Hz
hdmi_mode=74 1920x1440 75 Hz
hdmi_mode=75 1920x1440 120 Hz Reduced blanking
hdmi_mode=76 2560x1600 Reduced blanking
hdmi_mode=77 2560x1600 60 Hz
hdmi_mode=78 2560x1600 75 Hz
hdmi_mode=79 2560x1600 85 Hz
hdmi_mode=80 2560x1600 120 Hz Reduced blanking
hdmi_mode=81 1366x768 60 Hz
hdmi_mode=82 1080p 60 Hz
hdmi_mode=83 1600x900 Reduced blanking
hdmi_mode=84 2048x1152 Reduced blanking
hdmi_mode=85 720p 60 Hz
hdmi_mode=86 1366x768 Reduced blanking
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 9 of 12 [179 Posts]   Goto page: Previous 1, 2, 3, ..., 7, 8, 9, 10, 11, 12 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Puppy Projects
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0922s ][ Queries: 13 (0.0111s) ][ GZIP on ]