Where are the downloads
wine 64 5.0
Buster 64 puppy wine 5.0 Where are the downloads?
Wine (for the most part) can be used in any Puppy
The Wine pets version2013 publishes are --like firefox and libreoffice-- not restricted to be used in any one Puppy. Of course, 64-bit versions of Wine can only run under 64-bit Operating Systems. And 32-bit versions of Wine, to be functional, require a 32-bit operating system or the presence of 32-bit compatibility libraries on a 64-bit operating system. Moreover, some versions of Puppy --published before Tahrpup(64) or racy 5.5-- did not contain the files needed to use Wine compiled under Tahrpup(64) or racy 5.5-- and thoughtfully Version2013 compiled versions of Wine that could be used under them.
Since you are running Buster64, you would want the Wine version compiled under Tahrpup64.
Version2013's wine thread can be found here, http://www.murga-linux.com/puppy/viewto ... 128#725128. It is a little confusing. The first post provides a link to all the versions of wine available. Just select a Wine version number, in blue text, and click on it. That will take you to the post discussing that particular build and providing a link to its download page.
You've asked about Wine 64 5.0. I assume that you know that Wine 64, although --IIRC-- it contains a 32-bit wineserver, will not otherwise run 32-bit Window Programs. For such programs, you would also need a Wine 32 bit version, Someone can correct me if I'm mistaken [and, perhaps explain how to run 32-bit programs under the 64-bit version].
Version2013 has provided links to both Wine 64 bit Stable and Development versions. Assuming you want the Stable Version, clicking 5.0 under the heading Stable, toward the bottom of the thread, will take you to this post, http://murga-linux.com/puppy/viewtopic. ... 67#1048967. Clicking wine-5.0 mirrors will take you to this post, https://version2013.yolasite.com/page1.php#wine-5.0. You'll note two versions, wine-5.0_v3.1.pet and wine-5.0_v3.2.pet. The "1" indicates it's been stripped (of probably unnecessary files) as opposed to "2" which has not. "2" is recommended if you may need to seek assistance from WineHq. When I remember, I choose "1": I doubt WineHq will be of any assistance when your OS is a frugal install.
Last thing to remember, Version2013's pets do not, themselves, provide menu entries. If you want menu entries, you'll also want to install one of the pets Version32 discusses near the bottom of the first post under the Heading "menu entries".
Edit-afterthought: After downloading the wine-pet, open a terminal and type "wine winecfg". BUT BE ON-LINE FIRST. When that command is executed, Wine will offer to download and install both mono and gecko. gecko enables running Windows web-browsers and is never needed nor recommended. But some Windows programs require mono. You can probably live without it. However, I've never been able to successfully install it when the opportunity to do so at the very beginning is missed.
Since you are running Buster64, you would want the Wine version compiled under Tahrpup64.
Version2013's wine thread can be found here, http://www.murga-linux.com/puppy/viewto ... 128#725128. It is a little confusing. The first post provides a link to all the versions of wine available. Just select a Wine version number, in blue text, and click on it. That will take you to the post discussing that particular build and providing a link to its download page.
You've asked about Wine 64 5.0. I assume that you know that Wine 64, although --IIRC-- it contains a 32-bit wineserver, will not otherwise run 32-bit Window Programs. For such programs, you would also need a Wine 32 bit version, Someone can correct me if I'm mistaken [and, perhaps explain how to run 32-bit programs under the 64-bit version].
Version2013 has provided links to both Wine 64 bit Stable and Development versions. Assuming you want the Stable Version, clicking 5.0 under the heading Stable, toward the bottom of the thread, will take you to this post, http://murga-linux.com/puppy/viewtopic. ... 67#1048967. Clicking wine-5.0 mirrors will take you to this post, https://version2013.yolasite.com/page1.php#wine-5.0. You'll note two versions, wine-5.0_v3.1.pet and wine-5.0_v3.2.pet. The "1" indicates it's been stripped (of probably unnecessary files) as opposed to "2" which has not. "2" is recommended if you may need to seek assistance from WineHq. When I remember, I choose "1": I doubt WineHq will be of any assistance when your OS is a frugal install.
Last thing to remember, Version2013's pets do not, themselves, provide menu entries. If you want menu entries, you'll also want to install one of the pets Version32 discusses near the bottom of the first post under the Heading "menu entries".
Edit-afterthought: After downloading the wine-pet, open a terminal and type "wine winecfg". BUT BE ON-LINE FIRST. When that command is executed, Wine will offer to download and install both mono and gecko. gecko enables running Windows web-browsers and is never needed nor recommended. But some Windows programs require mono. You can probably live without it. However, I've never been able to successfully install it when the opportunity to do so at the very beginning is missed.
Re: Buster 64 puppy wine 5.0 Where are the downloads?
You are a bit short of words.linux28 wrote:Where are the downloads
wine 64 5.0
Do you mean this: https://sourceforge.net/projects/dpup/files/64bit/ ?
When you open the Menu button, there is "Repo dpupbuster" at the bottom, just above "Exit". It is a link.
Hi again linux28,
foxpup is right. It's been a while since I booted into Buster64. I forgot that josejp2424 had provided a wine version of his own.
I switch between many Puppies. So, frankly, I don't directly use a wine pet provided by either josejp2424 or version2013. They all would require individual installs into my various Puppies. Rather, I still use the portable wine I provided here, http://www.murga-linux.com/puppy/viewto ... 245#989245. It combined the work of shinobar and version2013 and, existing outside of any Puppy, can be used by many. Also, as it is external to any Puppy, its contents is not limited by SaveFiles (which I prefer to SaveFolders) but only by the available space of the partition on which it is located.
foxpup is right. It's been a while since I booted into Buster64. I forgot that josejp2424 had provided a wine version of his own.
I switch between many Puppies. So, frankly, I don't directly use a wine pet provided by either josejp2424 or version2013. They all would require individual installs into my various Puppies. Rather, I still use the portable wine I provided here, http://www.murga-linux.com/puppy/viewto ... 245#989245. It combined the work of shinobar and version2013 and, existing outside of any Puppy, can be used by many. Also, as it is external to any Puppy, its contents is not limited by SaveFiles (which I prefer to SaveFolders) but only by the available space of the partition on which it is located.
Re: Buster 64 puppy wine 5.0 Where are the downloads?
wine 4 It works, but wine5 is wrong, wine5 is notfoxpup wrote:You are a bit short of words.linux28 wrote:Where are the downloads
wine 64 5.0
Do you mean this: https://sourceforge.net/projects/dpup/files/64bit/ ?
When you open the Menu button, there is "Repo dpupbuster" at the bottom, just above "Exit". It is a link.
"wine 4 It works, but wine5 is wrong, wine5 is not".
The advice "always use the latest version" is good; but not always. The only absolute about computing is that "the stars must align": your operating system must properly communicate with an application; and both must be able to communicate with your computer's CPU(s); mother-board and relevant hard-ware.
Is there any particular reason you NEED Wine 5? Or are you merely advising the Dev of the application or operating system that a problem exists? If so, what is the problem? Exactly, what did you do and what do you see?
The advice "always use the latest version" is good; but not always. The only absolute about computing is that "the stars must align": your operating system must properly communicate with an application; and both must be able to communicate with your computer's CPU(s); mother-board and relevant hard-ware.
Is there any particular reason you NEED Wine 5? Or are you merely advising the Dev of the application or operating system that a problem exists? If so, what is the problem? Exactly, what did you do and what do you see?
https://sourceforge.net/projects/dpup/f ... t/downloadmikeslr wrote:"wine 4 It works, but wine5 is wrong, wine5 is not".
The advice "always use the latest version" is good; but not always. The only absolute about computing is that "the stars must align": your operating system must properly communicate with an application; and both must be able to communicate with your computer's CPU(s); mother-board and relevant hard-ware.
Is there any particular reason you NEED Wine 5? Or are you merely advising the Dev of the application or operating system that a problem exists? If so, what is the problem? Exactly, what did you do and what do you see?
This version is not available
wine 4 Some of the required software does not work. Would you like to try a new version?
Download wine 5 elsewhere, does not correspond to the library of this system or for other reasons, I can't run it, I want to run some software on windows