wireless / wifi cards confirmed to work in puppy - OLD LIST
-
- Posts: 21
- Joined: Mon 13 Aug 2007, 13:52
Airnet AWN154 works!
I just got an Airnet AWN154 pcmcia card working using ndiswrapper and the xp drivers on the CD that comes with the card on Puppy 3.00 .
Harold
Harold
CNET CNWLC-811 PCMCIA Wireless card Works fine in puppy 3.0
I am able to successfully run wireless with the CNET CNWLC-811 PCMCIA 11Mbps card. I load the driver for RT2400, test RA0 and then use DHCP to get a connection to my unsecured network.
I have not been successful with a protected network such as WEP or WPA.
John
I have not been successful with a protected network such as WEP or WPA.
John
- scotto_puppy
- Posts: 39
- Joined: Thu 22 Mar 2007, 21:56
- Location: Elvina Bay, NSW,Australia
-
- Posts: 45
- Joined: Mon 29 Oct 2007, 22:34
- Location: Communidad Valenciana, Spain
Broadcom BCM43 with WPA - works
Using ndiswrapper and windows drivers together with command line wpa_supplicant works! Fails miserably using Network Wizard because WPA (of 8 characters, either alpha or hex equivalent) doesn't connect.
-
- Posts: 106
- Joined: Fri 22 Dec 2006, 08:30
- Location: Rome, Italy
Linksys WUSB54GC (RT73 chip) w/ 128 bit WEP in Pup3.01: works great using a connection script.
I had different degrees of bad luck with either Connection Wizard, RuTilt or Pwireless, however if I take the commands that the Wizard (eventually) generates and put them in a script then the adapter works perfectly.
I had different degrees of bad luck with either Connection Wizard, RuTilt or Pwireless, however if I take the commands that the Wizard (eventually) generates and put them in a script then the adapter works perfectly.
BN BlueNEXT BN-WD54G (rt73driver)
Just got the above USB wireless network adaptor (less than £10 incl postage from ebay) working with puppy 3.01.
The 'Connect' wizard allocated driver rt2570 to this adaptor but has no WPA support.
I blacklisted this driver and loaded rt73 and all works perfectly with native WPA supported.
The easiest wireless card/usb yet.
Ian
The 'Connect' wizard allocated driver rt2570 to this adaptor but has no WPA support.
I blacklisted this driver and loaded rt73 and all works perfectly with native WPA supported.
The easiest wireless card/usb yet.
Ian
Netgear 511T laptop card. working with WPA in Puppy 3.01
I was looking for a 'guaranteed' Puppy card, easily available in the UK, and wanted it to work with a module and NOT ndis ! I bought it six months ago but ran into problems, but now in Puppy 3.01 is was all so easy!
Puppy 3.01 > load ath_pci network module (which seems odd as it gave me the impression is was for desktop cards rather than laptop pcmcia type ... would it be possible to add 'pcmcia' into the text for this module?)
Ah this was soooo easy and pleasant to set up using WPA, it all just worked.
Toshiba Satellite Pro 4200, 500 Mhz, 192 MB, Netgear 511T using ath_pci module and WPA.
I was looking for a 'guaranteed' Puppy card, easily available in the UK, and wanted it to work with a module and NOT ndis ! I bought it six months ago but ran into problems, but now in Puppy 3.01 is was all so easy!
Puppy 3.01 > load ath_pci network module (which seems odd as it gave me the impression is was for desktop cards rather than laptop pcmcia type ... would it be possible to add 'pcmcia' into the text for this module?)
Ah this was soooo easy and pleasant to set up using WPA, it all just worked.
Toshiba Satellite Pro 4200, 500 Mhz, 192 MB, Netgear 511T using ath_pci module and WPA.
I have a quite old Belkin F5D7011 PCMCIA 54g (Broadcom chipset) card and never succeeded in having it working under Puppy 1.13-2.14 on an old Acer Travelmate 514txv notebook (celeron 500 MHz - 256MB ram). It simply never seemed to got power (no led activity). In Windoze 98 it worked well, yet in Win2000 the card hanged the notebook as soon as it got inserted in PCMCIA slot.
Tried the Belkin card today on an Asus notebook ( Pentium 4 M 1.5 GHz - Ram 256 MB ddr) and Puppy 2.16. With the Belkin card inserted, the bcm43xx driver isn't loaded at startup (led lights turned off). I had to load the driver manually, and immediately the power led on the card switched on. Configuring the SSID and channel made it work FLAWLESSLY.
I'll never know if the problem was in puppy 2.14 or in the Acer 514txv motherboard, since that old Acer notebook has been stolen...
Tried the Belkin card today on an Asus notebook ( Pentium 4 M 1.5 GHz - Ram 256 MB ddr) and Puppy 2.16. With the Belkin card inserted, the bcm43xx driver isn't loaded at startup (led lights turned off). I had to load the driver manually, and immediately the power led on the card switched on. Configuring the SSID and channel made it work FLAWLESSLY.
I'll never know if the problem was in puppy 2.14 or in the Acer 514txv motherboard, since that old Acer notebook has been stolen...
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
to add data as a table . . .Flash wrote:Something like a spreadsheet wiki? Lobster might know of such a thing.
http://spreadsheets.google.com/
html tables can be added eg
http://puppylinux.org/wikka/AdditionalPrograms
here is existig wiki Wireless Working info
http://puppylinux.org/wikka/WirelessWorking
you can also add tables in the existig wiki
Code: Select all
{{table columns="3" cellpadding="1" cells="BIG;GREEN;FROGS;yes;yes;no;no;no;###"}}
netgear wg121
Netgear WG121 (vendor id 0846 product id 4200 revision number 1.10)
Puppy 3.01
works with Ndiswrapper and drivers from "ndis5" diretory of windows installation/driver CD
must be plugged into a usb2.0 port, does not work in a usb1.1 port, at least not on my machine. Other devices here work in both types of ports on this machine, so I don't think it's my ports.
Puppy was the first distribution besides Win98 that I got this adapter to work with reliably.
At long last!
Puppy 3.01
works with Ndiswrapper and drivers from "ndis5" diretory of windows installation/driver CD
must be plugged into a usb2.0 port, does not work in a usb1.1 port, at least not on my machine. Other devices here work in both types of ports on this machine, so I don't think it's my ports.
Puppy was the first distribution besides Win98 that I got this adapter to work with reliably.
At long last!
-
- Posts: 13
- Joined: Tue 25 Dec 2007, 07:26
I jult love puppy, did over a week to install and costumuze it, and it just didint work the second boot.
Got puppy now and it all works out of the box
Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.
Sorry for my bad english, im from Holland
Got puppy now and it all works out of the box
Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.
Sorry for my bad english, im from Holland
-
- Posts: 13
- Joined: Tue 25 Dec 2007, 07:26
Dont know, but the chip is a RT2400 chip, and i got it from a friend, which wanted 54mbps. That card didnt work under Puppy. The box of the card says its an E-Tech WL-101.jonyo wrote:Got make, model, vers info for the card?BlackWhizz wrote:Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
You may be thinking of the experimental rt2x00 driver, but Puppy does not contain this.BlackWhizz wrote:Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.
Puppy has the (legacy) rt2400 Linux driver, which is quite stable, not experimental at all.
USB Wireless Modem - Franklin CDU550
I tried to follow the instructions (below) but am not certain how to proceed. It is very possible that I skipped a step or did something else incorrectly. Here are the steps I followed:
1. Opened geany
2. Pasted in all of the text following "Code:" below.
3. Saved as /root/my-applications/franklincdu550/cdu550.sh
4. cd to: /root/my-applications/franklincdu550
5. Clicked on "cdu550.sh"
6. No errors, just a new "#" prompt
Did I do things correctly?
How do I get Setup - Network Wizard to see my USB modem, please?
1. Opened geany
2. Pasted in all of the text following "Code:" below.
3. Saved as /root/my-applications/franklincdu550/cdu550.sh
4. cd to: /root/my-applications/franklincdu550
5. Clicked on "cdu550.sh"
6. No errors, just a new "#" prompt
Did I do things correctly?
How do I get Setup - Network Wizard to see my USB modem, please?
Here is the information (direct from Franklin) for getting the Franklin USB EVDO CDU-550 Modem working with Linux.
Quote:
Linux systems already have USB modem driver but needs to assign a device to a special node. After the assignment, user can use the node as a modem device.
Attached file is a shell script to create a node for "C-motech" modem. The script produces nodes which mount modem as a serial device. The CDU-550 modem will be mounted on /dev/ttyACM# where # is a number, for example, /dev/ttyACM2.
Code:
#!/bin/bash
# usb : acm
echo -e "\033[32mMake Modem Device\033[0m"
for i in `seq 0 2` ; do
mknod /dev/ttyACM$i c 166 $i
done
echo -e "\033[32mMake Dual Mode Device\033[0m"
for i in `seq 0 2` ; do
mknod /dev/ttyUSB$i c 188 $i
done
echo -e "\033[32mMake driver rule\033[0m"
/sbin/modprobe usbserial vendor=0x16d8 product=0x5511
/sbin/modprobe usbserial vendor=0x16d8 product=0x5512
/sbin/modprobe usbserial vendor=0x16d8 product=0x5513
/sbin/modprobe usbserial vendor=0x16d8 product=0x5521
/sbin/modprobe usbserial vendor=0x16d8 product=0x5522
/sbin/modprobe usbserial vendor=0x16d8 product=0x5523
/sbin/modprobe usbserial vendor=0x16d8 product=0x5531
/sbin/modprobe usbserial vendor=0x16d8 product=0x5532
/sbin/modprobe usbserial vendor=0x16d8 product=0x5533
/sbin/modprobe usbserial vendor=0x16d8 product=0x5541
/sbin/modprobe usbserial vendor=0x16d8 product=0x5542
/sbin/modprobe usbserial vendor=0x16d8 product=0x5543
/sbin/modprobe usbserial vendor=0x16d8 product=0x5551
/sbin/modprobe usbserial vendor=0x16d8 product=0x5552
/sbin/modprobe usbserial vendor=0x16d8 product=0x5553
/sbin/modprobe usbserial vendor=0x16d8 product=0x5561
/sbin/modprobe usbserial vendor=0x16d8 product=0x5562
/sbin/modprobe usbserial vendor=0x16d8 product=0x5563
/sbin/modprobe usbserial vendor=0x16d8 product=0x6011
/sbin/modprobe usbserial vendor=0x16d8 product=0x6012
/sbin/modprobe usbserial vendor=0x16d8 product=0x6013
/sbin/modprobe usbserial vendor=0x16d8 product=0x6021
/sbin/modprobe usbserial vendor=0x16d8 product=0x6022
/sbin/modprobe usbserial vendor=0x16d8 product=0x6023
/sbin/modprobe usbserial vendor=0x16d8 product=0x6511
/sbin/modprobe usbserial vendor=0x16d8 product=0x6512
/sbin/modprobe usbserial vendor=0x16d8 product=0x6513
/sbin/modprobe usbserial vendor=0x16d8 product=0x6521
/sbin/modprobe usbserial vendor=0x16d8 product=0x6522
/sbin/modprobe usbserial vendor=0x16d8 product=0x6523
/sbin/modprobe usbserial vendor=0x16d8 product=0x6531
/sbin/modprobe usbserial vendor=0x16d8 product=0x6532
/sbin/modprobe usbserial vendor=0x16d8 product=0x6533
/sbin/modprobe usbserial vendor=0x16d8 product=0x6541
/sbin/modprobe usbserial vendor=0x16d8 product=0x6542
/sbin/modprobe usbserial vendor=0x16d8 product=0x6543
/sbin/modprobe usbserial vendor=0x16d8 product=0x6551
/sbin/modprobe usbserial vendor=0x16d8 product=0x6552
/sbin/modprobe usbserial vendor=0x16d8 product=0x6553
/sbin/modprobe usbserial vendor=0x16d8 product=0x6561
/sbin/modprobe usbserial vendor=0x16d8 product=0x6562
/sbin/modprobe usbserial vendor=0x16d8 product=0x6563
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603