what happened to my puppy?

Using applications, configuring, problems
Post Reply
Message
Author
200monkeys

what happened to my puppy?

#1 Post by 200monkeys »

i put puppy on a 200M partition on a 2G drive.

Some software started not starting, then it became more prominent until nearly nothing worked.
I now get a message at bootup:
Bummer, could not run '/sbin/getty': File too large

now just running from the CD seems slower as well, though i cannot figure why.....

kmoffat
Posts: 6
Joined: Sun 08 May 2005, 16:48

#2 Post by kmoffat »

Puppy Newbie here, but doesn't pup create a 256meg file to store settings? If you are using a 200Meg partition, it might be full?

guess....

p.s. puppy is very cool.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

Give the Puppy some space . . .

#3 Post by Lobster »

The smallest size that puppy tries to create (see next post) just for the pup001 (where it saves data) is indeed 256 meg
The other components that boot puppy and contain all the programs also require space. Who can suggest minimum and realistic sizes for puppy partitions?
Last edited by Lobster on Tue 24 May 2005, 14:11, edited 1 time in total.
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#4 Post by BarryK »

The 256M is only what Puppy wants to create.
If there is not enough room, Pup will make a pup001 file to fit available space.
So, a 200M partition should be okay.

User avatar
ezeze5000
Posts: 347
Joined: Tue 10 May 2005, 17:48
Location: Missouri U.S.A
Contact:

re-partition size

#5 Post by ezeze5000 »

I gave my puppy 20 GB......He needs room to run and play :D

nduanetesh
Ultra Super-stud
Posts: 168
Joined: Fri 06 May 2005, 02:36

#6 Post by nduanetesh »

Hard drive failure? maybe? or some sort of drive corruption?

Does the error message really say "Bummer"?

Oh, and does anybody know what is "/sbin/getty"? (Can't fire up puppy at the moment, so can't check for myself.)

User avatar
babbs
Posts: 397
Joined: Tue 10 May 2005, 06:35
Location: Tijuana, BCN, Mexico

#7 Post by babbs »

I hope this helps...

getty Command

Purpose

Sets the characteristics of ports.

Syntax

getty [ [ -r | -u | -U ] [ -d ] [ -H HeraldString ] [ -M motdFile ] [ -N ] ] PortName

Description

The getty command sets and manages terminal lines and ports. The getty command is run by the init command. The getty command is linked to the Terminal State Manager program. The Terminal State Manager program provides combined terminal control and login functions.

Note: The getty command is not entered on the command line.

When invoked as the getty command, the Terminal State Manager program provides the normal port management functions that include:

Bidirectional use -- Allows terminal lines to be used to initiate and accept connections.
Line speed -- Sets the baud rates for sending and receiving.
Parity -- Sets the parity to be even, odd or none.
Delays -- Sets the delays for carriage return, tab, new line, and form feed.
Character set mapping -- Sets the character set mapping for case, tabs, and carriage control.
Logger Program -- Specifies the program used to log the user into the system. If the attribute is set, the Secure Attention Key (SAK) processing is disabled. If the attribute is not set, it defaults to /usr/sbin/login. The logger attribute is contained within the Object Data Manager (ODM) database.
Character and line erase -- Sets the keystroke used for character and line erase.
Echoing mode -- Sets the echo to local or remote.

Security

Access Control: This program should be installed as a program in the Trusted Computing Base, executable by any user and setuid to root.

Example

To enable logging onto tty0, add the following line to the /etc/inittab file:

tty0:2:respawn: /usr/sbin/getty /dev/tty0

This command initializes the port /dev/tty0 and sets up the characteristics of the port.

More details are found at:
http://publib.boulder.ibm.com/infocente ... /getty.htm

200monkeys

#8 Post by 200monkeys »

here is my /etc/inittab:

::sysinit:/etc/rc.d/rc.sysinit
tty1::respawn:/sbin/getty -n -l /bin/autologinroot 38400 tty1
tty2::respawn:/sbin/getty 38400 tty2
::shutdown:/tmp/rc.reboot
::ctrlaltdel:/sbin/reboot

is this correct? I have a prob when i try shutdown i get reboot........
tty0 is what i set my modem to......still learning this stuff...

also, i thought a comparison of the cd contents Vs the harddrive contents, and find almost half of my icons say ERROR and have been redirected from
/bin/busybox
to
/bif/busybob
what the??? I assume I should change them back, but anyone know what could cause this??

I do like the puppy, it just needs some love....

200monkeys

#9 Post by 200monkeys »

i just tried to change the links, instead of saying /bif/busybob it says /bin/xxx
where xxx is the name of the file, in a typebox w/ a check box "relative link". How do i change the link, not the name?

Post Reply