A New Mascot for Puppy Linux
-
- Posts: 1
- Joined: Sun 06 Apr 2008, 13:56
A New Mascot for Puppy Linux
Hi,
We have a Chihuahua called 'Princess' she is currently very pregnant. She is a short haired Chihuahua and her boyfriend was a long haired. We would be delighted if you would consider either Princess or one of the new puppies to be the new mascot instead of using stock photos. I would be pleased to upload some photos somewhere (Suggestions of a website to host pictures welcome - not flikr - don't like it!!). It saddens both my wife and myself to here about the loss of 'Puppy'!!! [/img]
I have attached a picture of 'Princess' here
We have a Chihuahua called 'Princess' she is currently very pregnant. She is a short haired Chihuahua and her boyfriend was a long haired. We would be delighted if you would consider either Princess or one of the new puppies to be the new mascot instead of using stock photos. I would be pleased to upload some photos somewhere (Suggestions of a website to host pictures welcome - not flikr - don't like it!!). It saddens both my wife and myself to here about the loss of 'Puppy'!!! [/img]
I have attached a picture of 'Princess' here
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Yes, post lots of photos!
We can use them as a resource, and maybe pick one out for use with Puppy Linux.
I am now using my avatar picture, as used in this forum, for my developer news pages:
http://puppylinux.com/news/news400a7-400b.htm
Here is the original, at 207x207 pixels:
http://puppylinux.com/pup207.jpg
....does anybody have the skills with a paint program to turn that into a round shape, to match my other round icons? I don't want a 3D effect, just simple round, and as it is JPG, no transparency, it is good enough for the area outside the button to be white, since I use a white page background.
Or, I guess it could change to PNG to get a nice smooth edge onto a transparent background out side the button.
I haven't got a clue how to use mtPaint to do that.
We can use them as a resource, and maybe pick one out for use with Puppy Linux.
I am now using my avatar picture, as used in this forum, for my developer news pages:
http://puppylinux.com/news/news400a7-400b.htm
Here is the original, at 207x207 pixels:
http://puppylinux.com/pup207.jpg
....does anybody have the skills with a paint program to turn that into a round shape, to match my other round icons? I don't want a 3D effect, just simple round, and as it is JPG, no transparency, it is good enough for the area outside the button to be white, since I use a white page background.
Or, I guess it could change to PNG to get a nice smooth edge onto a transparent background out side the button.
I haven't got a clue how to use mtPaint to do that.
[url]https://bkhome.org/news/[/url]
To make picture circular on a white background:BarryK wrote:I haven't got a clue how to use mtPaint to do that.
- switch to mask channel (Channels->Edit mask, or press Shift+4)
- select the entire picture (Selection->Select all, or Ctrl+A)
- draw a filled circle (Selection->Fill ellipse, or press filled ellipse icon on toolbar)
- switch back to image channel (Channels->Edit image, or Shift+1)
- select white for color A (left click on white color in palette)
- fill the entire image (Selection->Fill selection, or press filled square icon)
- delete mask (Channels->Delete, check the Mask channel)
- save in any format
The same on transparent background:
- switch to alpha channel (everything will become transparent, for channel is created cleared by default)
- select the entire picture
- draw a filled circle (a circular area of image will reappear)
- save as PNG
I've created these with Gimp.
At bottom, I slightly extended the white area of Puppy, so that I was able to put it in a circle.
Then I cut the circle, pasted as new image, and removed the background with the magic wand.
Created a new background by choosing a part from the old, resampling it to 48x48.
Finally slightly decreased the size of Puppy, to match in the new background.
Pasted Puppy in the background..
Then selected a circle, inverted it, cut it (to get the transparent round border).
If you like other modifications, let me know
Mark
At bottom, I slightly extended the white area of Puppy, so that I was able to put it in a circle.
Then I cut the circle, pasted as new image, and removed the background with the magic wand.
Created a new background by choosing a part from the old, resampling it to 48x48.
Finally slightly decreased the size of Puppy, to match in the new background.
Pasted Puppy in the background..
Then selected a circle, inverted it, cut it (to get the transparent round border).
If you like other modifications, let me know
Mark
- Attachments
-
- pup2.jpg
- jpg with white background, 85% quality, ready for the web.
- (1.28 KiB) Downloaded 3319 times
-
- pup1.png
- saved with maximum quality, you might use higher compression maybe for the web.
- (9.23 KiB) Downloaded 3401 times
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
I think these are better...
- Attachments
-
- puppy-48.png
- (9.23 KiB) Downloaded 3391 times
-
- puppy-48.jpg
- (1.31 KiB) Downloaded 3360 times
-
- puppy-96.png
- (36.32 KiB) Downloaded 3408 times
-
- puppy-96.jpg
- (2.91 KiB) Downloaded 3383 times
Last edited by MU on Mon 07 Apr 2008, 09:33, edited 2 times in total.
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Re: A New Mascot for Puppy Linux
upload herejamesmcginnis wrote:I would be pleased to upload some photos somewhere (Suggestions of a website to host pictures welcome - not flikr - don't like it!!)
http://www.imageshack.us/
click host it
take the last link and post on your thread here
highlight
click on Img
look under image store
http://tmxxine.com/g/
or here
http://creativecommons.org/image
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
wjaguar,
Thanks for those instructions, I've saved them for future reference.
Mark, your creations are brilliant!
Yes, the second lot look better -- Puppy has a kind of "brooding" look in the photo, which suits him being slightly lower in the photo, as you have done in the second lot. The thin margin looks good too.
They are definitely going onto my website!
Thanks for those instructions, I've saved them for future reference.
Mark, your creations are brilliant!
Yes, the second lot look better -- Puppy has a kind of "brooding" look in the photo, which suits him being slightly lower in the photo, as you have done in the second lot. The thin margin looks good too.
They are definitely going onto my website!
[url]https://bkhome.org/news/[/url]
I have no xcf, just the png.
I used this as a base (attached):
Mark
I used this as a base (attached):
Mark
- Attachments
-
- pup96.jpg
- (4.51 KiB) Downloaded 3293 times
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
I recommend always saving the xcf so you can modify the different layers at a later time.
Actually every modification I do goes to a different layer, once I feel comfortable I may merge some layers to simplify management.
Actually every modification I do goes to a different layer, once I feel comfortable I may merge some layers to simplify management.
[url]http://rarsa.blogspot.com[/url] Covering my eclectic thoughts
[url]http://www.kwlug.org/blog/48[/url] Covering my Linux How-to
[url]http://www.kwlug.org/blog/48[/url] Covering my Linux How-to
Here is a "button-like" version.
Here are some samples but I can make it any colour you want.
Also puppy's face could be made smaller but for now I left it with the same proportions to the image size as barry's avatar.
I'm also uploading the xcf file in case someone else with more artistic talents wants to fix it. The xfc includes some layers with elements that I decided not to use.
Remember: think of JPG or PNG as the binary and XCF as the "source code"
When sharing these kind of images it is better to share the "source" so it can be modified by others.
Here are some samples but I can make it any colour you want.
Also puppy's face could be made smaller but for now I left it with the same proportions to the image size as barry's avatar.
I'm also uploading the xcf file in case someone else with more artistic talents wants to fix it. The xfc includes some layers with elements that I decided not to use.
Remember: think of JPG or PNG as the binary and XCF as the "source code"
When sharing these kind of images it is better to share the "source" so it can be modified by others.
Last edited by rarsa on Thu 10 Apr 2008, 02:51, edited 1 time in total.
[url]http://rarsa.blogspot.com[/url] Covering my eclectic thoughts
[url]http://www.kwlug.org/blog/48[/url] Covering my Linux How-to
[url]http://www.kwlug.org/blog/48[/url] Covering my Linux How-to