puppy 4 alpha 3.96 upgraded NOW TO PUPPY 4
-
- Posts: 20
- Joined: Tue 18 Mar 2008, 23:47
- Location: Richmond, Va, USA
Dingo beta and EEE pc network module
The EEEpc uses the atl2 module for wired networking and only the atl1 module is in the setup (doesn't work). Tried several others to no avail. I'm currently using Pupeee which works fine, but wanted to surf with the latest. Any chance we could get the EEE wired and wireless modules into the next beta?
Thanks
Thanks
punjabi language
hello charni dear and other puppy_lover
i would extend my hand for all those starting for a punjabi language puppy.
let me know.
charni i am currently checking your distro.
will tell in short time how it was.
bye
and long live GNU>LINUX>PUppy
i would extend my hand for all those starting for a punjabi language puppy.
let me know.
charni i am currently checking your distro.
will tell in short time how it was.
bye
and long live GNU>LINUX>PUppy
Hi,
I am testing the last version 3.98.
it looks very nice and is working fine.
I heave one problem and that is the Wireless-connection.
My AP has WPA2 and WPA/AES..
WPA2 is not working and WPA/AES does not excist for so far I can see.
Scanning for Ap's gives me a full list of excisting AP's, so the driver is active.
So it also could be a problem in Puppy.
Perhaps it is a setting-problem. I tries all the settings and it is not working.
Spec of my laptop:
- Intel Centrino Duo T7100,
- Intel Pro Wireless 3945 ABG
I hope this help You (and me) to solve the problem.
My gratulations for such a good work.
Grtz.
Petty
As advised, redirected to
http://www.murga-linux.com/puppy/viewto ... 514#191514
Grtz
Petty
I am testing the last version 3.98.
it looks very nice and is working fine.
I heave one problem and that is the Wireless-connection.
My AP has WPA2 and WPA/AES..
WPA2 is not working and WPA/AES does not excist for so far I can see.
Scanning for Ap's gives me a full list of excisting AP's, so the driver is active.
So it also could be a problem in Puppy.
Perhaps it is a setting-problem. I tries all the settings and it is not working.
Spec of my laptop:
- Intel Centrino Duo T7100,
- Intel Pro Wireless 3945 ABG
I hope this help You (and me) to solve the problem.
My gratulations for such a good work.
Grtz.
Petty
As advised, redirected to
http://www.murga-linux.com/puppy/viewto ... 514#191514
Grtz
Petty
Last edited by petty on Sun 20 Apr 2008, 08:46, edited 1 time in total.
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
May I suggest that you copy your text here and open a new post in Hardware - networking - wireless.petty wrote:Hi,
I am testing the last version 3.98.
it looks very nice and is working fine.
I heave one problem and that is the Wireless-connection.
My AP has WPA2 and WPA/AES..
WPA2 is not working and WPA/AES does not excist for so far I can see.
Scanning for Ap's gives me a full list of excisting AP's, so the driver is active.
So it also could be a problem in Puppy.
Perhaps it is a setting-problem. I tries all the settings and it is not working.
Spec of my laptop:
- Intel Centrino Duo T7100,
- Intel Pro Wireless 3945 ABG
I hope this help You (and me) to solve the problem.
My gratulations for such a good work.
Grtz.
Petty
You will have more attention there.
When done you can edit your post here and refer to the new one.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
puppy 4 dingo 3.96 upgrade to puppy 4 beta 2
Hi har_singh and all others,
i have made clean frugal install of puppy 4 beta 2 today without any problem.
i have also upgraded my pup_save-Deep-396.2fs to puppy 4 beta 2 and found to be OK. all the applications installed in that save file are working OK,
only exception is MUT which is not working. all the forum friends who have downloaded my 396 save file can upgrade to puppy 4 beta 2 without any
problem and enjoy the benefit of many applications which are difficult for newbies to install and make the applications function as well.
THANKS TO BARRY.K AND HIS TEAM.
i have made clean frugal install of puppy 4 beta 2 today without any problem.
i have also upgraded my pup_save-Deep-396.2fs to puppy 4 beta 2 and found to be OK. all the applications installed in that save file are working OK,
only exception is MUT which is not working. all the forum friends who have downloaded my 396 save file can upgrade to puppy 4 beta 2 without any
problem and enjoy the benefit of many applications which are difficult for newbies to install and make the applications function as well.
THANKS TO BARRY.K AND HIS TEAM.
Last edited by charnisingh on Sun 20 Apr 2008, 11:16, edited 1 time in total.
Thnaks for the advice. I have done so.Béèm wrote:May I suggest that you copy your text here and open a new post in Hardware - networking - wireless.petty wrote:Hi,
I am testing the last version 3.98.
it looks very nice and is working fine.
I heave one problem and that is the Wireless-connection.
My AP has WPA2 and WPA/AES..
WPA2 is not working and WPA/AES does not excist for so far I can see.
Scanning for Ap's gives me a full list of excisting AP's, so the driver is active.
So it also could be a problem in Puppy.
Perhaps it is a setting-problem. I tries all the settings and it is not working.
Spec of my laptop:
- Intel Centrino Duo T7100,
- Intel Pro Wireless 3945 ABG
I hope this help You (and me) to solve the problem.
My gratulations for such a good work.
Grtz.
Petty
You will have more attention there.
When done you can edit your post here and refer to the new one.
Grtz.
Petty
Flash Youtube
Hello Mr. Singh.
I'm wondering if you have been able to overcome the playback problems of flash videos from sites like youtube in your flavor of puppy. I have read the forums on this but have found no solution that works.
Does flash video playback smoothly in Singh-Dingo? Judging by your screen shots it looks to be a great puplet.
Mny Thx in Advance.
Vito
I'm wondering if you have been able to overcome the playback problems of flash videos from sites like youtube in your flavor of puppy. I have read the forums on this but have found no solution that works.
Does flash video playback smoothly in Singh-Dingo? Judging by your screen shots it looks to be a great puplet.
Mny Thx in Advance.
Vito
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
puppy 4 beta 2
dear vito,
i never installed flash at that time so i would not be in a position to say any thing on that however i did try u tube and found it receive broken videos so i did not try much on that. you can download my pup_save-Deep.2fs rar file and enjoy many other worthy applications by using it along with puppy alpha 3.96 or later versions by upgrading it . to know about use of save2fs file please read the puppy master's blog as well as forum posts if you are not aware of it.
thanks and regards.
i never installed flash at that time so i would not be in a position to say any thing on that however i did try u tube and found it receive broken videos so i did not try much on that. you can download my pup_save-Deep.2fs rar file and enjoy many other worthy applications by using it along with puppy alpha 3.96 or later versions by upgrading it . to know about use of save2fs file please read the puppy master's blog as well as forum posts if you are not aware of it.
thanks and regards.
iso file
Hello:
I downloaded the remaster 394.iso but when I try to boot it I get a kernel error.
However, I have the deep file so I suppose it is reasonable to assume that it will also work with the Newest vanilla dingo beta 2 and there then would be no need for the singh-dingo iso anyway, correct?
Mny Thx,
Vito
I downloaded the remaster 394.iso but when I try to boot it I get a kernel error.
However, I have the deep file so I suppose it is reasonable to assume that it will also work with the Newest vanilla dingo beta 2 and there then would be no need for the singh-dingo iso anyway, correct?
Mny Thx,
Vito
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
puppy 4 alpha 3.96
Dear Vito.
Deep396.2fs is a save file which has to be used along with puppy 3.96 or later versions of puppy as save file. i am on frugal install and found no problem in upgrading it to puppy 4 beta 2. i am sure it will work fine in case you know how to use a save file.
thanks and regards.
Deep396.2fs is a save file which has to be used along with puppy 3.96 or later versions of puppy as save file. i am on frugal install and found no problem in upgrading it to puppy 4 beta 2. i am sure it will work fine in case you know how to use a save file.
thanks and regards.
usb external drive
after I installed the deep save file and integrated it into my dingo setup, dingo no longer recognizes my external usb drive. It doesn't see it. If I boot from the cd the drive is recognised right away. But when booted from the hard drive it doesn't. It gives an error when I try and mount it from the command line: " bad block device." Altering the fstab does not fix the problem either. Any ideas?
By the Way, can't wait for the Sinh-Dingo 4 version. I'll nuke my present version and start over.
Vito
By the Way, can't wait for the Sinh-Dingo 4 version. I'll nuke my present version and start over.
Vito
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
upgrading from pup_save-Deep396
Dear Vito,
i am on GRUB based frugal install system using a fat partition and it works very fine for me as well as this is the most suitable install sytem for puppy. i do have a usb port but i have never used it ..
if you do know how to install GRUB based frugal install on a fat partition
things will be much easier.
please think over it.
thanks and regards.
i am on GRUB based frugal install system using a fat partition and it works very fine for me as well as this is the most suitable install sytem for puppy. i do have a usb port but i have never used it ..
if you do know how to install GRUB based frugal install on a fat partition
things will be much easier.
please think over it.
thanks and regards.
usb external
Dear Mr Singh:
I thing that it was a bad Mtab or init script because I copied the files from your save file to my puppy setup installed on the hard drive. I reinstalled and copied once more, this time leaving out the etc directory files and now all works well, except that the 4.00 rc version with the .25kernel has some problems and I will therefore reinstall with the .21 kernal on the final version of dingo.
Mny Thx,
Vito
I don't do the frugal install as Puppy is the best software for this old AMD 750 MHz slowpoke computer. Will you come out with another iso?
I thing that it was a bad Mtab or init script because I copied the files from your save file to my puppy setup installed on the hard drive. I reinstalled and copied once more, this time leaving out the etc directory files and now all works well, except that the 4.00 rc version with the .25kernel has some problems and I will therefore reinstall with the .21 kernal on the final version of dingo.
Mny Thx,
Vito
I don't do the frugal install as Puppy is the best software for this old AMD 750 MHz slowpoke computer. Will you come out with another iso?
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
puppy 4
Hi all,
sorry i am on modem but soon i will have new ADSL-2 connection and will be back , i have created/recreated the following software/applications as given below:-
1. xmms for puppy 4 adding all the req. libs. to work in puppy 4.
2. GConf-2 extended with req, libs for pupp 4.
3. Gizmo-project created to work in puppy 4.
4. VLC-0.8.6 extended to work in puppy 4.
5. mplayer-1.0rc1.0.8.6 extended to work in puppy 4 in full screen mode
6. skype sfs file which includes qt-4
7. latest SFS-Combiner+GtkBasic003+pet2sfs as sfs file (thanks to Mark (MU)
all the above mentioned applications will work in PUPPY 3 as well. this work was done while i was on modem, all this should be good for the newbies as they would not have to search and add any libs. as the applications are self relient as for libs are concerned. however gizmo- project will require GConf2 and ORBIT-2 , but these are available as PET pkgs.
UPDATE: all the pkgs, mentioned above have now been UPLOADED
some as PETs and some as sfs files at singh-dingo.
MAIN SIGHT LINK: http://www.puppylinux.ca/members/index. ... h-Dingo%2F
DIRECT LINK TO Gizmo-Project:
at:http://www.puppylinux.ca/members/index. ... Project%2F
please download and enjoy. if any questions please post here.
Best Regards.
sorry i am on modem but soon i will have new ADSL-2 connection and will be back , i have created/recreated the following software/applications as given below:-
1. xmms for puppy 4 adding all the req. libs. to work in puppy 4.
2. GConf-2 extended with req, libs for pupp 4.
3. Gizmo-project created to work in puppy 4.
4. VLC-0.8.6 extended to work in puppy 4.
5. mplayer-1.0rc1.0.8.6 extended to work in puppy 4 in full screen mode
6. skype sfs file which includes qt-4
7. latest SFS-Combiner+GtkBasic003+pet2sfs as sfs file (thanks to Mark (MU)
all the above mentioned applications will work in PUPPY 3 as well. this work was done while i was on modem, all this should be good for the newbies as they would not have to search and add any libs. as the applications are self relient as for libs are concerned. however gizmo- project will require GConf2 and ORBIT-2 , but these are available as PET pkgs.
UPDATE: all the pkgs, mentioned above have now been UPLOADED
some as PETs and some as sfs files at singh-dingo.
MAIN SIGHT LINK: http://www.puppylinux.ca/members/index. ... h-Dingo%2F
DIRECT LINK TO Gizmo-Project:
at:http://www.puppylinux.ca/members/index. ... Project%2F
please download and enjoy. if any questions please post here.
Best Regards.
Last edited by charnisingh on Sun 25 May 2008, 11:48, edited 3 times in total.
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
upgraded 396 to puppy 4
sorry i was late in doing so because i was on modem and waiting for my broad band connection, i got b. band connection to-day, downloaded puppy 4 (k2.6.21..) and here i am to report that there is no problem faced while upgrading from 396 to puppy 4.
attached here with is my first on gizmo project.
attached here with is my first on gizmo project.
- Attachments
-
- orbit2-2.14.0.pet
- thanks to Mark (MU)
- (181.54 KiB) Downloaded 627 times
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
puppy 4
hello all,
puppy 3.96 has been upgraded now to puppy 4 without any problem
thanks to BarryK and his team.
puppy 3.96 has been upgraded now to puppy 4 without any problem
thanks to BarryK and his team.
-
- Posts: 138
- Joined: Sat 06 Oct 2007, 11:58
PUPPY 4 direct install
Hi all,
i am posting here along the screen shot of PUPPY 4, it was installed
directly with some change to bring up HOYPUP the way it should.
i am posting here along the screen shot of PUPPY 4, it was installed
directly with some change to bring up HOYPUP the way it should.