How to use Canon FB630P parallel scanner?

Problems and successes with specific brands/models of printers
Post Reply
Message
Author
Master_wrong
Posts: 452
Joined: Thu 20 Mar 2008, 01:48

How to use Canon FB630P parallel scanner?

#1 Post by Master_wrong »

I saw this website claiming that they can use parallel scanner into linux
such as:
FB320P, FB620P, FB630P, FB330P, N340P, N640P, and N640P ex scanners
75, 150, 300 and 600dpi scan resolutions
Post-scan CCD gain correction (calibration)
Nibble or ECP mode parallel port support
SANE Backend (integrated into main SANE-backends package,

http://canon-fb330p.sourceforge.net/

http://www.buzzard.me.uk/jonathan/scanners.html

http://sourceforge.net/project/showfile ... p_id=26508

http://cyberelk.net/tim/data/libieee1284/stable/

I hope this is true as I myself are using it...
anyone can help me install their program (libieee and driver) ?

how they able to create the driver here :
http://canon-fb330p.sourceforge.net/reverse.html


thank you

muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#2 Post by muggins »

Master_wrong,

I think the driver for your scanner is already in the available sane .pet package. Which pupversion are you using? (I'm asking as I think there were some problems with scanners under pup3x, & I think ttuuxxx has recently uploaded a complete sane package for 3x).

Also one thing to check, (for parallel canon scanners), is to open the file /etc/sane.d/dll.conf in a text editor, & remove the comment from the line with #canon_pp.

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

#3 Post by ttuuxxx »

first install this http://www.puppylinux.ca/ttuuxxx/progra ... r-v1.0.pet
and try it out. I read that the The beta code from this project was integrated into SANE 1.0.8 (released on 27th May 2002) and development at this end has since stopped. So basically it should be in the package I made up. ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

Master_wrong
Posts: 452
Joined: Thu 20 Mar 2008, 01:48

#4 Post by Master_wrong »

Thank you ttuuxxx,muggins, I try edit the file you mentioned with no luck...

my installed pet :
gimp 2.2.15
libgphoto 2.1.6
qt-3.3.8
sane 1.0.18
xsane 0.994
sane backend 1.0.17

I still downloading... slowly at my connection...
do I need anything else to change ?

thank you.

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

#5 Post by ttuuxxx »

Hi does this mean you installed my package and it didn't work?
http://www.puppylinux.ca/ttuuxxx/progra ... r-v1.0.pet
sorry but I wasn't sure.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

Master_wrong
Posts: 452
Joined: Thu 20 Mar 2008, 01:48

#6 Post by Master_wrong »

thank you ttuuxxx, I download and install U_scanner pack.zip(pet inside) before i download your pet,
I install your pet, it is installed but not changing anything and the messages "no device available" when i try xsane.... could it because i installed u_scanner pack?
should I uninstall all pet from the u_scanner pack before install your pet?

btw my puppy is 301 seamonkey.

muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#7 Post by muggins »

Master_wrong,

I would uninstall all scanner .pets, then try ttuuxxx's version. I've got a parallel canon N640P scanner so, since your 630 is using the same sane driver, can't see why we can't get it working.

Besides making sure that canon_pp is uncommented in /etc/sane.d/dll.conf, I just remembered another oddity. For some reason the .pet I installed didn't have libsane-canon_pp.so in /usr/lib/sane, do if you also don't have this library file, you can get it here.

Just extract the package to /, and libsane-canon_pp.so will end up in /usr/lib/sane.

Master_wrong
Posts: 452
Joined: Thu 20 Mar 2008, 01:48

#8 Post by Master_wrong »

sorry, I tried with no luck here, i've tried the puppy 4 too.

But... I tried teenpup 2008, (I think 214) with kde andd kooka, my FB630P work! after open the file /etc/sane.d/dll.conf in a text editor, & remove the comment from the line with #canon_pp.

the scan quality isn't too bright however...

thank you.

muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#9 Post by muggins »

With the pupversions where it didn't work, did /usr/lib/sane have the file libsane-canon_pp.so? Regarding brightness, doesn't xsane allow you to alter this?

muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#10 Post by muggins »

Ok, these are the exact steps I followed to get a canon-640Pex flatbed parallel scanner recognised on pup2.16.

I installed sane_backends-1.0.17.pet

The package manager then generated a message about a missing libgphoto library, & because I was on the .net, the manager then downloaded & installed libgphoto-2.1.6.pet. I then installed xsane-0.991.pet, changed the line, in /etc/sane.d/dll.conf, from #canon_pp to canon_pp, then restarted the window manager.

When I tried running Xsane, it doesn't see my scanner! Download libsane-canon_pp.so package, and extract to /, retry Xsane, & bingo! a working scanner.

The same general procedure should work for you, and any pupversion, with the caveat that the sane version for pup3 was missing substantial elements & it's better to go with the version compiled by ttuuxxx.

N.B. Regarding brightness, on the sane-canon_pp site, they say:
Brightness and Contrast
These are not implemented, and probably never will be. These appear to be implemented entirely in software. Use GIMP or
a similar program if you need these features.
And yet when I run xsane, it does have a slider for brightness, and this did brighten the scanned image.

Master_wrong
Posts: 452
Joined: Thu 20 Mar 2008, 01:48

#11 Post by Master_wrong »

ok

Thanks muggins.

Master_wrong
Posts: 452
Joined: Thu 20 Mar 2008, 01:48

#12 Post by Master_wrong »

thank muggins, I have tried again and FB630p work nicely on puppy 301.

User avatar
battleshooter
Posts: 1378
Joined: Wed 14 May 2008, 05:10
Location: Australia

#13 Post by battleshooter »

Just as a side note, I found I needed sane (used petget) to get Muggins steps to work, which he didn't mention. But other than that, using his instructions my CanoScan N676U works, not flawlessly yet, needs some tweaking, but it works :)
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]

muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#14 Post by muggins »

Battleshooter,

glad to hear you're scanner is working but, before the Spanish Inquisition arrives at my front door:
I installed sane_backends-1.0.17.pet

User avatar
battleshooter
Posts: 1378
Joined: Wed 14 May 2008, 05:10
Location: Australia

#15 Post by battleshooter »

Sorry Muggins the Spanish Inquisition is back :)

I don't know what it was, but for me, when I installed just the sane_backends-1.0.17.pet it didn't create /etc/sane.d for me, it was only when I installed the individual sane package that I could get my scanner alive. Maybe it was just a odd thing for me, cause no one else reported it.

Sorry to be so seemingly belligerent :oops: I am appreciative of this walkthrough you put up concerning the scanner
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]

muggins
Posts: 6724
Joined: Fri 20 Jan 2006, 10:44
Location: hobart

#16 Post by muggins »

I'm curious about this...which individual sane package did you install? Reason I'm curious is that, AFAIK, the pup3 package, sane-1.0.18.pet, doesn't install /etc/sane.d, whereas the pup2 package, sane_backends-1.0.17.pet, does.

User avatar
battleshooter
Posts: 1378
Joined: Wed 14 May 2008, 05:10
Location: Australia

#17 Post by battleshooter »

Erm, yes, this the part when I start feeling unsure of myself :?

I did install sane_backends-1.0.17.pet, in fact, I used your link. I'm pretty certain of that because this is the second time I used your instructions and the first time I saved the pets to my hard drive so I just used them again. I thought the first time I got away without having to manually install sane was because I used Ttuxxx's package.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]

User avatar
battleshooter
Posts: 1378
Joined: Wed 14 May 2008, 05:10
Location: Australia

#18 Post by battleshooter »

Sigh, I don't like being wrong. I don't know what went wrong last time, but I guess I must have installed sane-1.0.18.pet instead of sane_backends-1.0.17.pet. I did a fresh install on a clean puppy and all went well and sane.d appeared. Sorry for any trouble Muggins, thanks for putting up with a noob :oops:
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]

arawn
Posts: 4
Joined: Sat 24 May 2008, 21:29

#19 Post by arawn »

Ttuuxx-

You are just the bomb, I swear. I've used a couple of your other packages in the past and they installed/ performed flawlessly. Tonight I got the sane backend and Xsane scanner packages from this thread- 2 quick dloads- clicked on them and now my puppy 3.01/ HP Scanjet 4300c rig is scanning like a fool.

Thanks for your part in making puppy such a tremendous distro!

Best regards- arawn

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

#20 Post by ttuuxxx »

arawn wrote:Ttuuxx-

You are just the bomb, I swear. I've used a couple of your other packages in the past and they installed/ performed flawlessly. Tonight I got the sane backend and Xsane scanner packages from this thread- 2 quick dloads- clicked on them and now my puppy 3.01/ HP Scanjet 4300c rig is scanning like a fool.

Thanks for your part in making puppy such a tremendous distro!

Best regards- arawn
Your welcome :wink:
I'm glad it worked well for you, Some haven't had such great success with it so quickly.
Excellent feedback is always welcomed 8)
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

Post Reply