ATI 8.28.8 Display-drivers for old cards

Message

#1 Post by MU » Mon 19 May 2008, 03:22

These are the propriatary ATI display-drivers, version 8.28.8.
They are made for Radeon cards 7000 to 9250.
These cards are not supported by newer drivers from ATI.
But they are supported by the free Xorg-drivers of Puppy.

*************************************************

To use the free Xorg-drivers, you do NOT need this sfs.
For the free Xorg-drivers, just install Xorg-DRI and Xorg-OpenGL with petget!
And install this updated libGL.so.1.2, that fixes some issues:
http://www.murga-linux.com/puppy/viewto ... 973#198973

*************************************************

The propriatary drivers are just needed, if you encounter problems with the free drivers.
For example Doom3 or Quake4 need them.
But they are also faster, and might fix some colour-problems in games.

Background-info:
http://www.murga-linux.com/puppy/viewtopic.php?t=29232

This is for Kernel 2.6.21.7!
If you have a different Kernel, you can try to compile your own module, a patched fglrx-source with readme.txt can be found in:
/usr/X11R71/kernel/source-patched/

It works in Muppy 008.3, Puppy 4.00, and should work in Puppy 3.01.
It does not replace your existing Xserver.
It just adds another one.

Download: (20 MB)
ftp://ks301128.kimsufi.com/Muppy0083/go ... TI_083.sfs

Checksum:
ftp://ks301128.kimsufi.com/Muppy0083/go ... fs-md5.txt

Download the SFS, and rename it from 083 to the version of your Puppy.
Then add it in the bootmanager (System-menu).
Be sure you run already in Xorg, not in Xvesa.
Then reboot, and exit X.
Now type:
install-ati

That activates the older Xorg 7.1 with the Ati-drivers.

If you want to revert back to Puppys newer Xorg 7.2:
exit X.
Type:
uninstall-ati

Issues:
Rxvt closes immedeatly the first time, you run it.
Afterwards, it runs ok.
Gtk-Fonts might look larger than usual.
If you miss a lib or program, try to symlink it from /usr/X11R7/xxx/ to /usr/X11R71/xxx/.

Fireglcontrol-panel wrongly tells you, that indirect Mesa-GL is used.
Type in a console "fglrxinfo" to get correct OpenGL-information.

I did not test them for a longer period.
In Puppy 2, Doom3 crashed after 10 minutes, when I played that 2 years ago.
So I played it in Puppy 1.
Maybe it works better with this new Xorg 7.1, please post your experiences!

The error-log is:
/usr/X11R71/var/log/Xorg.0.log

If you compile programs, run first "uninstall-71", or you cannot share your programs with others.

If you want to compile programs explicitly for 7.1, do it in 7.1, and type:
export PKG_CONFIG_PATH=/usr/X11R71/lib/pkgconfig:/usr/lib/pkgconfig
./configure --prefix=/usr/X11R71

More infos concerning that in the first link.
But there should be no reason to compile for 7.1, it is just intended as a "runtime" for special games.
The free xorgdrivers have more features meanwhile, like composite-support and such.

Mark

#2 Post by MU » Mon 19 May 2008, 21:54

Ok, some experiences.

The driver runs fine with several Quake2-engines, and BlobAndConquer.

But it freezes Puppy after some minutes, playing quake2evolved in Wine 0.9.61.
This reminds me of the problems I had with Doom3 and Quake 4 in Puppy 2 two years ago.

The free Xorg-driver now can be updated with a newer libGL, that fixes several old errors, see:
http://www.murga-linux.com/puppy/viewto ... 973#198973

So before you install this big SFS, I recommend to try the small libGL instead, first.
Just if that cannot fix your isues, try the SFS.

Mark

#3 Post by MU » Tue 20 May 2008, 12:48

I updated the SFS.
I added one line to the installscripts.
Without it, on one system I had to reboot, so that the installation worked as intended.

I tested different versions of Quake with and without wine again.
The propriatary Ati-driver IS faster.
So you might use it not only, if the free driver fails, but also, if you want a faster gameplay.

And with the free driver the light on the walls reflected from shots with the standard weapon looks wrong.
The walls look very "coloured", what is irritating.
The propriatary Driver handles this correct.

Mark

#4 Post by MU » Tue 20 May 2008, 20:52

I updated the SFS.
It now should work even if you never used Xorg before.
So you can use it, if xorgwizard freezes.
Also fixed the restart of the Xserver, it sometimes used a wrong path-setting.

I also renamed install-71 to install-ati.

Mark

wolfwatcher51 · #5 Post by **wolfwatcher51** » Sun 01 Jun 2008, 06:30

MU, I sure could use some help here, please.

I have acer travelmate 8104 with fatfree puppy 301 and an ati X700 vid card.

First I tried to use your first suggestion and add the xorg-dri, xorg-opengl, and the updated libgl.so.1.2 file. Ran xorg and tried all the combinations (test, no test) and only BlkSOD.

Next I tried your .sfs file of prop drivers. Changed name to x11R71-ati_301.sfs, put it in /mount/home and used bootmanager to install it. Rebooted then, my interpretation of "exit x" was to ctrl+alt+backspace. At that prompt I entered install-ati. Forget exactly, but got to xorgwizard and tried to run xorg and it looked like it was working because I got past test now, or OK and to a screen that said something about if it looks ok, if not, you can use tweak. And I rremember a screen that showed the resolution and horiz and vert refreshrates, but there were no numbers in them???

When I got through it went to my desktop. Two desklets from the right side were now an inch or so in from the right side. I rebooted, now one of the desklets was missing. Re-installed it. Time to go to bed, shut computer down.

Brought computer up awhile ago and it said it did not start last time so I ran xorgwizard again. This time I got the results I had before I installed the .sfs file, BlkSOD. I had in /usr x11r71, and x11r72 which was symlink to x11r7.

Decided to get back fresh so swapped pup save file for the one I had backed up before the .sfs experiment, deleted the .sfs file and rebooted the computer. entered xwin restarticewm and was back to pre .sfs experiment. desklets where they should be and all correct, no x11r 71 or 72 directories. I thought I saved the xorg log file, but cannot find it on the flash drive now. It looked the same as the backup one, so I do not think it recorded anythig.

If you would be so kind, where does it look like I made a mistake or you see something that looks like it went wrong? What would you suggest we do now?

Thanks in advance, Chris.

#6 Post by MU » Wed 04 Jun 2008, 16:54

sorry for the late reply, but I am not at home, and so do not have the Ati card here.
But I have a differnt computer now for tests.
First:
if you run "install-ati", then xorgwizard should not start.
Instead, X (7.1) should start immedeatly.
So something went wrong.

It might help to see your /etc/X11/xorg.conf and /var/log/Xorg.0.log.

Maybe your card is too new for this driver.
Did you try the newer ati-PET posted in this forum already?
Your card is named "X...", but I think this driver here was basically intended for "Radeon 7000" to "Radeon 9250".

I remember vaguely, that in german boards, the "X..." cards had very poor or no support with these old drivers.
So the newer one should be tried.

wait...
yes, at
http://ati.amd.com/
the newer driver is recommended for the X700.

PET:
http://www.murga-linux.com/puppy/viewtopic.php?p=199690

Mark

wolfwatcher51 · #7 Post by **wolfwatcher51** » Thu 05 Jun 2008, 07:11

Mark,

Thanks for the reply. One look around the forum and it is easy to see you are very busy and I just appreciate your taking the time for such a noob. Thanks.

Well, not sure exactly what I did, I tried several things.

I tried fglrx 7.11 and when I ran xorg, and selected test...BlkSOD.

Went back to xvesa and then tried fglrx 8.4. This time I skipped test and answered yes and it rebooted and the screen looks like it might actually be at the native resolution, 1680x1050, or something like that. Success?

In the console I typed fgl_glxgears and hit enter. I got back:
Using GLX_SGIX_pbuffer
XLIB: extension "GLX" missing on display ":0.0".
Error: couldn't gat an RGBA, double-buffered visual

Then typed fglrxinfo and got:
The xlib: ... from above, twice
Error: couldn't find RGB GLX visual!

What would I enter into the console to get it to tell me what the screen resolution is? Or, where would I look? xorg.conf showed the native resolution even when I know it was at the xvesa set resolution.

Here is xorg.conf

#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "synaptics"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx"

# This loads xtrap extension, used by xrandr
Load "xtrap"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R7/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...

Section "ServerLayout"
InputDevice "Synaptics Mouse" "AlwaysCore"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us" #xkeymap0
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "0"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.10"
Option "MaxSpeed" "0.30"
Option "AccelFactor" "0.0030"
Option "SHMConfig" "on"
#Option "Repeater" "/dev/ps2mouse"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-65
VertRefresh 56-61
#UseModes "Modes0" #monitor0usemodes
EndSection

Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection

Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "NoDRI" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "DRM_nbufs" # 
#Option "DRM_bufsize" # 
#Option "Capabilities" # 
#Option "CapabilitiesEx" # 
#Option "ClientDriverName" # [<str>]
#Option "KernelModuleParm" # [<str>]
#Option "AGPMask" # 
#Option "AGPv3Mask" # 
#Option "BufferTiling" # [<bool>]
#Option "Profile" # <str>
#Option "RingSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "GammaCorrectionI" # 
#Option "GammaCorrectionII" # 
#Option "OpenGLOverlay" # [<bool>]
#Option "DefaultVisualTrueColor" # [<bool>]
#Option "VideoOverlay" # [<bool>]
#Option "DesktopSetup" # [<str>]
#Option "MonitorLayout" # [<str>]
#Option "ForceMonitors" # [<str>]
#Option "EnableMonitor" # <str>
#Option "OverlayOnCRTC2" # [<bool>]
#Option "Mode2" # [<str>]
#Option "PairModes" # [<str>]
#Option "HSync2" # [<str>]
#Option "VRefresh2" # [<str>]
#Option "ScreenOverlap" # 
#Option "MemClock" # 
#Option "ASICClock" # 
#Option "UseInternalAGPGART" # [<bool>]
#Option "FastSwap" # [<bool>]
#Option "Stereo" # [<bool>]
#Option "StereoSyncEnable" # 
#Option "DisableOvScaler" # [<bool>]
#Option "UseFastTLS" # 
#Option "BlockSignalsOnLock" # [<bool>]
#Option "ForceGenericCPU" # [<bool>]
#Option "CenterMode" # [<bool>]
#Option "OffScreenPixmaps" # [<bool>]
#Option "EnableOpaqueOverlayVisual" # [<bool>]
#Option "TMDSCoherentMode" # [<bool>]
#Option "EnablePrivateBackZ" # [<bool>]
#Option "TVFormat" # [<str>]
#Option "TVStandard" # [<str>]
#Option "TVOverscan" # [<bool>]
#Option "TVHSizeAdj" # 
#Option "TVVSizeAdj" # 
#Option "TVHPosAdj" # 
#Option "TVVPosAdj" # 
#Option "TVHStartAdj" # 
#Option "TVColorAdj" # 
#Option "PseudoColorVisuals" # [<bool>]
#Option "PreferredVRefresh" # 
#Option "FastStart" # [<bool>]
#Option "ProfileDriver" # [<bool>]
#Option "PPPTforGART" # [<bool>]
#Option "TexturedVideo" # [<bool>]
#Option "TexturedVideoSync" # [<bool>]
#Option "Textured2D" # [<bool>]
#Option "TexturedXrender" # [<bool>]
#Option "DPMS" # [<bool>]
#Option "MaxGARTSize" # 
#Option "LogoPosX" # 
#Option "LogoPosY" # 
#Option "LogoColFG" # 
#Option "LogoColBG" # 
#Option "SwapScreens" # [<bool>]
#Option "FBC" # [<bool>]
#Option "FrontBufferMode" # 
#Option "BackBufferMode" # 
#Option "DepthBufferMode" # 
#Option "OverlayBufferMode" # 
#Option "VideoOverlayBufferMode" # 
#Option "EnableIrqMgr" # [<bool>]
#Option "EnableMulticard" # [<bool>]
#Option "EnablePPLIB" # [<bool>]
#Option "DefaultOnDC" # [<bool>]
Identifier "Card0"
Driver "fglrx" #card0driver
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X700 (PCIE)"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1680x1050"
EndSubsection
EndSection

#PuppyHardwareProfile=ATI_ATOMBIOSSEC0000

And here is the xorg.0.log

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux puppypc 2.6.21.7 #1 Sun Sep 9 02:29:54 GMT-8 2007 i686
Build Date: 09 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 5 01:20:41 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Synaptics Mouse"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/TTF/
(**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "RandR" "on"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 3

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1025,0070 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,2668 card 1025,0070 rev 04 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1025,0070 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1025,0070 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1025,0070 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1025,0070 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1025,0070 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2641 card 1025,0070 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1025,0070 rev 04 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1025,0070 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5653 card 1025,0070 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:03:0: chip 8086,4223 card 8086,1000 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 14e4,169c card 1025,0070 rev 03 class 02,00,00 hdr 00
(II) PCI: 06:07:0: chip 104c,8026 card 1025,0070 rev 00 class 0c,00,10 hdr 00
(II) PCI: 06:09:0: chip 1217,7223 card 3001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:09:1: chip 1217,7223 card f001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:09:2: chip 1217,7110 card 1025,0070 rev 00 class 08,80,00 hdr 80
(II) PCI: 06:09:3: chip 1217,7223 card 0001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:28:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:1), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:2), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xc8200000 - 0xc82fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:9:0), (6,7,8), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 8: bridge is at (6:9:1), (6,8,8), BCTRL: 0x0084 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/27, 0xc8100000/16, I/O @ 0x2000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[1] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[2] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[3] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[4] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[5] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[6] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[7] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[10] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[11] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[12] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[14] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[15] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[16] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[17] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[18] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[1] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[2] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[3] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[4] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[5] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[6] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[7] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[10] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[11] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[12] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[14] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[15] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[16] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[17] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[18] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[5] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[6] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[7] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[8] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[9] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[10] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[11] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[16] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[21] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[22] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[23] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[24] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[25] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (module does not exist, 0)
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.47.3
Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.2.99.905, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.47.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.471
(II) ATI Proprietary Linux Driver Build Date: Feb 25 2008 21:22:09
(--) Chipset Supported AMD Graphics Processor (0x5653) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[5] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[6] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[7] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[8] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[9] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[10] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[11] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[16] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[21] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[22] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[23] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[24] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[25] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81fc4b0
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[5] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[6] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[7] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[8] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[9] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[10] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[11] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[19] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[28] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI MOBILITY RADEON X700" (Chipset = 0x5653)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0070)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xc8100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M26-P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.47.3
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 1:0.0.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) fglrx(0): Year: 2003 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 121.0 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1680 h_sync: 1704 h_sync_end 1792 h_blank_end 1876 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(II) fglrx(0): SAMSUNG
(II) fglrx(0): LTN154P1-L02
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004ca3000000000000
(II) fglrx(0): 000d0103802115780a87f594574f8c27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101442f90c4601a0f401858
(II) fglrx(0): 13004bcf100000190000000f00000000
(II) fglrx(0): 00000000003cd2026401000000fe0053
(II) fglrx(0): 414d53554e470a2020202020000000fe
(II) fglrx(0): 004c544e31353450312d4c30320a00fe
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 3 power states available:
(II) fglrx(0): 1. 358/297MHz @ 60Hz [enable load balancing]
(II) fglrx(0): 2. 105/120MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0): 3. 209/182MHz @ 60Hz [low voltage, enable sleep]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 19 modes found for primary display.
(--) fglrx(0): Virtual size is 1680x1050 (pitch 0)
(**) fglrx(0): *Mode "1680x1050": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1680x1050" 121.00 1680 1704 1792 1876 1050 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1440x900": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900" 121.00 1440 1464 1552 1876 900 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1400x1050": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050" 121.00 1400 1424 1512 1876 1050 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1280x1024": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 121.00 1280 1304 1392 1876 1024 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1280x960": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960" 121.00 1280 1304 1392 1876 960 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1280x768": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768" 121.00 1280 1304 1392 1876 768 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 121.00 1152 1176 1264 1876 864 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 121.00 1024 1048 1136 1876 768 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1024x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 121.00 1024 1048 1136 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "848x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 121.00 848 872 960 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 121.00 800 824 912 1876 600 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "720x576": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 121.00 720 744 832 1876 576 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "720x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 121.00 720 744 832 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 121.00 640 664 752 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "640x400": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 121.00 640 664 752 1876 400 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "512x384": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 121.00 512 536 624 1876 384 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "400x300": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300" 121.00 400 424 512 1876 300 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "320x240": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240" 121.00 320 344 432 1876 240 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "320x200": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200" 121.00 320 344 432 1876 200 1051 1054 1065 +hsync +vsync
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (129, 126)
(--) fglrx(0): Virtual size is 1680x1050 (pitch 1728)
(**) fglrx(0): *Mode "1680x1050": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1680x1050" 121.00 1680 1704 1792 1876 1050 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1440x900": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900" 121.00 1440 1464 1552 1876 900 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1400x1050": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050" 121.00 1400 1424 1512 1876 1050 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1280x1024": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 121.00 1280 1304 1392 1876 1024 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1280x960": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960" 121.00 1280 1304 1392 1876 960 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1280x768": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768" 121.00 1280 1304 1392 1876 768 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 121.00 1152 1176 1264 1876 864 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 121.00 1024 1048 1136 1876 768 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "1024x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 121.00 1024 1048 1136 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "848x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 121.00 848 872 960 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 121.00 800 824 912 1876 600 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "720x576": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 121.00 720 744 832 1876 576 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "720x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 121.00 720 744 832 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 121.00 640 664 752 1876 480 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "640x400": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 121.00 640 664 752 1876 400 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "512x384": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 121.00 512 536 624 1876 384 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "400x300": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300" 121.00 400 424 512 1876 300 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "320x240": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240" 121.00 320 344 432 1876 240 1051 1054 1065 +hsync +vsync
(**) fglrx(0): Default mode "320x200": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200" 121.00 320 344 432 1876 200 1051 1054 1065 +hsync +vsync
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xc8100000 - 0xc810ffff (0x10000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[7] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[8] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[9] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[10] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[11] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[12] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[13] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] 0 0 0x00002000 - 0x000020ff (0x100) IX[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[22] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[29] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading sub module "glx"
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) fglrx: Failed to load module "glx" (module does not exist, 0)
(EE) fglrx(0): Failed to load GLX module.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xd0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1728 x 7141
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(**) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Mouse auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) Synaptics Mouse touchpad found
(**) Option "AlwaysCore"
(**) Synaptics Mouse: always reports core events
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc102"
(**) Keyboard0: XkbModel: "pc102"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "Synaptics Mouse" (type: MOUSE)
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called
(--) Synaptics Mouse auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) Synaptics Mouse touchpad found
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded

Sorry for such a long post, but I tried to attach the two files, but it did not work, so opted for copy and paste.

If you could look at them and see if they look alright, or suggest any other things I should do to get optimal performance from the driver/card combo, it would be greatly appreciated. Thanks, Chris.

wolfwatcher51 · #8 Post by **wolfwatcher51** » Thu 05 Jun 2008, 07:12

Deleted duplicate posting, sorry, Chris.

#9 Post by MU » Thu 05 Jun 2008, 12:30

(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading sub module "glx"
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx

It looks like, you first used my Ati-Installer.
That activated my Xorg 7.1.
Then you installed the new Ati.pet.

It misses files, as Xorg 7.1 does not include everything, just the stuff required for the OLD driver.

I'd suggest, to run
uninstall-ati
or better, use a backup of your savefile, without my Ati-Xorg 7.1.

Then install the new Ati.pet again.
Now it should use Puppys /usr/X11R7/ (Xorg 7.2), and find all files it needs.
Mark

wolfwatcher51 · #10 Post by **wolfwatcher51** » Thu 05 Jun 2008, 16:06

Mark, Thanks for the reply.

I hope I am not wearing you out.

I replaced the pup_save.2fs with one from another fatfree301 install.

I rebooted puppy and ran the ATI_fgrlx-7.1.1.pet

Rebooted again and checked to see if puppy pkg mgr showed the 7.1.1 pet install, it did. Checked dependencies, got appears to have all it needs message.

Ctrl+Alt+Backspace to prompt.
1680x1050x24
typed xorgwizard. Chose xorg, 1680x1050x24, then OK. Did not select test, other poster said test would hang but OK was ok.

Screen went to the red text with message that starts if x did not work....

xorgwizard, xvesa booted to desktop. Made copies of xorg.conf and xorg.0.log. Please see below.

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/puppypc:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux puppypc 2.6.21.7 #1 Sun Sep 9 02:29:54 GMT-8 2007 i686
Build Date: 09 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 5 10:45:41 2008
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 3

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1025,0070 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,2668 card 1025,0070 rev 04 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1025,0070 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1025,0070 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1025,0070 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1025,0070 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1025,0070 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2641 card 1025,0070 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1025,0070 rev 04 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1025,0070 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5653 card 1025,0070 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:03:0: chip 8086,4223 card 8086,1000 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 14e4,169c card 1025,0070 rev 03 class 02,00,00 hdr 00
(II) PCI: 06:07:0: chip 104c,8026 card 1025,0070 rev 00 class 0c,00,10 hdr 00
(II) PCI: 06:09:0: chip 1217,7223 card 3001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:09:1: chip 1217,7223 card f001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:09:2: chip 1217,7110 card 1025,0070 rev 00 class 08,80,00 hdr 80
(II) PCI: 06:09:3: chip 1217,7223 card 0001,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:28:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:1), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:2), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xc8200000 - 0xc82fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:9:0), (6,7,8), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 8: bridge is at (6:9:1), (6,8,8), BCTRL: 0x0084 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/27, 0xc8100000/16, I/O @ 0x2000/8
List of video drivers:
fglrx
apm
ark
ati
atimisc
chips
cirrus
cyrix
dummy
via
glint
i128
i740
i810
imstt
mga
neomagic
newport
nsc
nv
r128
radeon
rendition
s3
s3virge
savage
siliconmotion
sis
sisusb
tdfx
tga
trident
tseng
vmware
voodoo
fbdev
vesa
vga
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) LoadModule: "apm"
(II) Loading /usr/lib/xorg/modules/drivers//apm_drv.so
(II) Module apm: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ark"
(II) Loading /usr/lib/xorg/modules/drivers//ark_drv.so
(II) Module ark: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.6.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 6.6.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "atimisc"
(II) Loading /usr/lib/xorg/modules/drivers//atimisc_drv.so
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 6.6.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "chips"
(II) Loading /usr/lib/xorg/modules/drivers//chips_drv.so
(II) Module chips: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/xorg/modules/drivers//cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "cyrix"
(II) Loading /usr/lib/xorg/modules/drivers//cyrix_drv.so
(II) Module cyrix: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dummy"
(II) Loading /usr/lib/xorg/modules/drivers//dummy_drv.so
(II) Module dummy: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "glint"
(II) Loading /usr/lib/xorg/modules/drivers//glint_drv.so
(II) Module glint: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "i128"
(II) Loading /usr/lib/xorg/modules/drivers//i128_drv.so
(II) Module i128: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "i740"
(II) Loading /usr/lib/xorg/modules/drivers//i740_drv.so
(II) Module i740: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.7.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "imstt"
(II) Loading /usr/lib/xorg/modules/drivers//imstt_drv.so
(II) Module imstt: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.4.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "neomagic"
(II) Loading /usr/lib/xorg/modules/drivers//neomagic_drv.so
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "newport"
(II) Loading /usr/lib/xorg/modules/drivers//newport_drv.so
(II) Module newport: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "nsc"
(II) Loading /usr/lib/xorg/modules/drivers//nsc_drv.so
(II) Module nsc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 2.0.96
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 4.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "rendition"
(II) Loading /usr/lib/xorg/modules/drivers//rendition_drv.so
(II) Module rendition: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "s3"
(II) Loading /usr/lib/xorg/modules/drivers//s3_drv.so
(II) Module s3: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.5.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "s3virge"
(II) Loading /usr/lib/xorg/modules/drivers//s3virge_drv.so
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 2.1.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib/xorg/modules/drivers//siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 1.2.99.901, module version = 1.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "sisusb"
(II) Loading /usr/lib/xorg/modules/drivers//sisusb_drv.so
(II) Module sisusb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "tdfx"
(II) Loading /usr/lib/xorg/modules/drivers//tdfx_drv.so
(II) Module tdfx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "tga"
(II) Loading /usr/lib/xorg/modules/drivers//tga_drv.so
(II) Module tga: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "trident"
(II) Loading /usr/lib/xorg/modules/drivers//trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "tseng"
(II) Loading /usr/lib/xorg/modules/drivers//tseng_drv.so
(II) Module tseng: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vmware"
(II) Loading /usr/lib/xorg/modules/drivers//vmware_drv.so
(II) Module vmware: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 10.15.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "voodoo"
(II) Loading /usr/lib/xorg/modules/drivers//voodoo_drv.so
(II) Module voodoo: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.3.1
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vga"
(II) Loading /usr/lib/xorg/modules/drivers//vga_drv.so
(II) Module vga: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[1] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[2] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[3] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[4] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[5] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[6] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[7] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[10] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[11] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[12] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[14] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[15] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[16] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[17] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[18] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[1] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[2] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[3] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[4] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[5] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[6] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[7] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[8] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[10] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[11] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[12] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[13] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[14] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[15] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[16] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[17] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[18] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8218000 - 0xc8218fff (0x1000) MX[B]
[5] -1 0 0xc8210000 - 0xc8213fff (0x4000) MX[B]
[6] -1 0 0xc8215000 - 0xc82157ff (0x800) MX[B]
[7] -1 0 0xc8200000 - 0xc820ffff (0x10000) MX[B]
[8] -1 0 0xc8214000 - 0xc8214fff (0x1000) MX[B]
[9] -1 0 0xc8004000 - 0xc80043ff (0x400) MX[B]
[10] -1 0 0xc8000000 - 0xc8003fff (0x4000) MX[B]
[11] -1 0 0xc8100000 - 0xc810ffff (0x10000) MX[B](B)
[12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[16] -1 0 0x000018a0 - 0x000018af (0x10) IX[B]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[21] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[22] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[23] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[24] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[25] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16

Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80c5404]
1: [0xffffe420]
2: Xorg(xf86memcpy+0x2b) [0x80a81bb]
3: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x13b) [0xb7a025ab]
4: Xorg(DoConfigure+0x20c) [0x80ceb5c]
5: Xorg(InitOutput+0x66a) [0x80a18ba]
6: Xorg(main+0x27b) [0x807001b]
7: /lib/libc.so.6(__libc_start_main+0xd8) [0xb7d93df8]
8: Xorg(FontFileCompleteXLFD+0x1e1) [0x806f561]

Fatal server error:
Caught signal 11. Server aborting

#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "synaptics"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx"

# This loads xtrap extension, used by xrandr
Load "xtrap"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R7/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1680x1050"
EndSubsection
EndSection

#PuppyHardwareProfile=ATI_ATOMBIOSSEC0000

Apparently something did not go as it should. But I do not have a clue as to what to do, besides seek your guidance of course.

Thanks again, Chris.

#11 Post by MU » Thu 05 Jun 2008, 16:28

the xorg.conf was not created correctly.

Please exit X.
Now run xorgwizard, and choose xorg.
This creates a required symlink, if you ran xvesa before.
Then when xorgwizard finished, and you cannot start X, type:

Code: Select all

rm -f /etc/X11/xorg.conf
aticonfig -f --initial

aticonfig should be installed by that ATI_fgrlx-7.1.1.pet, though I could not check it yet (have just an old card not supported by the new drivers).

aticonfig was at least in their old driver-pack, and my installer uses it.
So if you have luck, and it is also in the new pet, it will create a working xorg.conf for you.

Mark

wolfwatcher51 · #12 Post by **wolfwatcher51** » Thu 05 Jun 2008, 21:27

Mark,

Thanks again.

# rm -f /etc/x11/xorg.conf
# aticonfig -f --initial

Data incomplete in file /etc/x11/xorg.conf
At least one Device section is required.
Data incompletre in file /etc/x11/xorg.conf
Undefined Monitor "Monitor 0"
referenced by Screen "Screen0".
Uninitialized file found, configuring.
Using /etc/x11/xorg.conf
Data incomplete in file /etc/x11/xorg.conf
At least one Device section is required.
Data incompletre in file /etc/x11/xorg.conf
Undefined Monitor "Monitor 0"
referenced by Screen "Screen0".
Saved backup to /etc/x11/xorg.conf.original-0.

Besides I have no luck, what does this mean? Thanks, Chris.

#13 Post by MU » Thu 05 Jun 2008, 21:40

please extract the attached xorg.conf in /etc/X11/

Then run:

aticonfig -f --initial
xwin

Mark

wolfwatcher51 · #14 Post by **wolfwatcher51** » Fri 06 Jun 2008, 12:10

Mark,

I d'loaded your file and placed in flash drive (using windoze machine).

Started puppy machine and went to /etc/x11 and renamed the current xorg.conf file to ...-bad.

Copied the file from flash drive into /etc/x11 and extracted to there.
I looked at the file and it looked to me to be like the ones we have used before.

Did Ctrl+Alt+Backspace to exit x and get to prompt.

I entered aticonfig -f --initial as instructed.
I entered xwin as instructed.
X did not start, got the red verbage about if x did not start....
Typed xorgwizard and selected xorg, yes, still got red verbage.
Typed xorgwizard and selected xvesa.

Went to /etc/x11 and found two xorg.conf files.
Removed them both to my documents and extracted your file again.
This time I opened a console and entered aticonfig -f --initial.
Got the message as before about incomplete xorg.conf file.
Typed xwin anyway and I believe i got to red verbage again.
Typed xorgwizard and then xvesa.
Went to /var/log and copied the xorg.0.log file and am copying it below.

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux puppypc 2.6.21.7 #1 Sun Sep 9 02:29:54 GMT-8 2007 i686
Build Date: 09 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 6 06:25:15 2008
(==) Using config file: "/etc/X11/xorg.conf"
Data incomplete in file /etc/X11/xorg.conf
At least one Device section is required.
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

A couple of questions if I may.

Is the incomplete xorg.conf file because aticonfig and/or puppy cannot "see" my chip and lcd screen?

Laptop vendors, including this Acer, do special things to the video/screen in windoze so that ati catalyst drivers do not work and you are stuck with the acer driver. Do these mods carry over to puppy linux or is it a whole new ballgame in puppy?

Did you see the post by cthisbear in the following?
http://www.murga-linux.com/puppy/viewto ... 64d#202861
I could not find entries in my xorg.conf file like he referred to. I think he may not be using a puppy.

Thanks for your patience and help, Chris.

#15 Post by MU » Fri 06 Jun 2008, 21:06

I'm a bit confused, it should generate the required entries.
Looked again at your first message, there everything was fine, except that the glx module could not be loaded.

I now would try to install a current ATI-Driver on my own.
You will need devx_301.sfs, and maybe Kernelsources.
This files provides both:
ftp://ks301128.kimsufi.com/Muppy0083/DE ... nt_083.sfs

ftp://ks301128.kimsufi.com/Muppy0083/DE ... md5sum.txt

In Puppy 310, you must rename it to:
development_301.sfs

Then add it in the bootmanager.
Then download
https://a248.e.akamai.net/f/674/9206/0/ ... x86_64.run

Then run in a console (in the same folder):
To go to the same folder, type something like:
cd /mnt/hda1/my-downloads/ATI-stuff
To run the installer:
bash ati-driver-installer-8-5-x86.x86_64.run

You might have to reboot then, or exit X and type:
rmmod radeon
rmmod drm
xwin

It might do things required for your card, that the packages we created, have overseen.
I'm away from saturday morning until tuesday morning, so maybe cannot reply quickly.
Good luck!
Mark

wolfwatcher51 · #16 Post by **wolfwatcher51** » Sun 08 Jun 2008, 06:37

Mark,

I really appreciate all your help and patience.

I followed your latest and it did not work either. In fact, when I got BlkSOD, and did hard restart, it never asked about failed to start and give me command so I could enter xorgwizard and then select xvesa.

It just kept rebooting to failed xorg with BlkSOD.

I decided to try puppy4 Dingo and did frugal install to another partition. When i tried xorg, I thought it was going to give me the BlkSOD, but then I saw an x in the center of the screen and then the desktop.

Now I have to figure out how to make wireless work, it did not work in my fatfree puppy301 either. Atleast out of the box.

I really liked gDesklets, too bad they are shown as being for puppy-3 only. I wonder why?

Anyway, thanks again for everything and I hope your trip is successful, Chris.

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

ATI 8.28.8 Display-drivers for old cards

ATI 8.28.8 Display-drivers for old cards