Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Thu 24 Apr 2014, 05:01
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Printers
hplip and hpliplite packages
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 10 [143 Posts]   Goto page: 1, 2, 3, ..., 8, 9, 10 Next
Author Message
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Mon 24 Mar 2008, 14:07    Post subject:  hplip and hpliplite packages
Subject description: HP PSC (Printer Scanner Copier) all-in-one software package
 

hpliplite latest version is 3.10.5
hpliplite official version is 3.9.8 (for puppy 4.xx)
hplip latest version is 3.9.2

hpliplite packages are "lite" versions the Hewlett-Packard's Linux Imaging and Printing software HPLIP.

They allow Printing and also Scanning (for HP PSC models, for instance).
Other hplip utilities are NOT included (hp-toolbox, hp-setup, fax,...).
The "lite" versions are not bloated as the full ones (Version 3.9.8 is only 4.5 MB, expanding to about 10MB when installed).
They do not require python and other big packages.
For this reason, hpliplite packages are recommended for puppy.

Please check whether your printer is supported by hplip and if requires additional plugins, at
http://hplipopensource.com/hplip-web/supported_devices/combined.html

If your printer requires plugins, please proceed as follows:
1. Download the appropriate plugin from http://www.linuxprinting.org/download/printdriver/auxfiles/HP/plugins/
2. Download and install the attached install_hp_plugin-2.0.pet (see below)
3. run the plugin installation program in a rxwt terminal:
Code:

install_hp_plugin name_of_the_correct_plugin



hpliplite-3.10.5 INSTALLATION:

Please install first the package libnetsnmp-15.pet,
http://dotpups.de/puppy4/dotpups/Printing/hpliplite/libnetsnmp-15.pet
or
http://puppyfiles.ca/dotpupsde/puppy4/dotpups/Printing/hpliplite/libnetsnmp-15.pet

and afterwards install

http://dotpups.de/puppy4/dotpups/Printing/hpliplite/hpliplite-3.10.5.pet or
http://puppyfiles.ca/dotpupsde/puppy4/dotpups/Printing/hpliplite/hpliplite-3.10.5.pet

Once hpliplite (and plugins, when required) is installed, one has to run the CUPS printer wizard,
in the Setup section of puppy's menu, to finish the printer's installation.

hpliplite-3.9.8 INSTALLATION:

For automatic installation, please use puppy package manager (in menu's setup entry).

If a manual installation is preferred, then:

Please install first the package libnetsnmp-15.pet,
http://dotpups.de/puppy4/dotpups/Printing/hpliplite/libnetsnmp-15.pet
or
http://puppyfiles.ca/dotpupsde/puppy4/dotpups/Printing/hpliplite/libnetsnmp-15.pet

and then hpliplite.3.9.8.pet,
http://dotpups.de/puppy4/dotpups/Printing/hpliplite/hpliplite-3.9.8.pet
or
http://puppyfiles.ca/dotpupsde/puppy4/dotpups/Printing/hpliplite/hpliplite-3.9.8.pet

Then restart cups:
Code:
/etc/init.d/cups stop
/etc/init.d/cups start




Once hpliplite (and plugins, when required) is installed, one has to run the CUPS printer wizard,
in the Setup section of puppy's menu, to finish the printer's installation.

Scanning is performed using xsane (already included in puppy 4.x)

That is all to be done for hpliplite-3.9.8 version.


For some older than 3.9.8 versions, the installation opens a terminal with the licensing terms. If agreed, then installation proceeds.

NOTE For hpliplite or hplip versions up to 3.9.2 and for puppy's using new versions of cups, as cups-1.3.9 and cups-1.4b2, the attached hpliplite-postinstall-cups-v1.3.9-v1.4b2 postinstall is necesary. Please download it and, in a terminal, gunzip it, make it executable and execute it once.
Code:
gunzip hpliplite-postinstall-cups-v1.3.9-v1.4b2.gz
chmod +x hpliplite-postinstall-cups-v1.3.9-v1.4b2
hpliplite-postinstall-cups-v1.3.9-v1.4b2

Then restart cups:
Code:
/etc/init.d/cups stop
/etc/init.d/cups start



NOTE for previous 2.8.10 version: Still a post install process is necessary for this version. Download the attached
hpliplite-2.8.10-postinstall.sh.gz file, gunzip it and run it once:
Code:
gunzip hpliplite-2.8.10-postinstall.sh.gz
sh hpliplite-2.8.10-postinstall.sh



Once hpliplite (and plugins, when required) is installed, one has to run the CUPS printer wizard,
in the Setup section of puppy's menu, to finish the printer's installation.

Scanning is performed using xsane (already included in puppy 4.x)

NOTES For puppy 3.01 users:

1. Cups package (ver. 1.1.23-1) is needed. See
http://www.murga-linux.com/puppy/viewtopic.php?p=227828&search_id=663222773#227828

2. sane and xsane packages are not included in puppy 3.x. They sould be manually installed

*************************************************

hplip-3.9.2


hplip allows printing and scanning, in addition to full control of -most- HP printers, including printer configuration,
ink-levels information, cleaning and alignment of cartridges, color calibration,...

WARNING: Not all hplip functionalities work:

1. Faxing has been disabled, since dbus does not work in this version.

2. The hp-systray command does not work either.

3. The supplies tab in hp-toolbox is not clickable, unless you refresh all printers pushing the refresh all button (F6).
Then the supplies tab works OK.



The packages can be found at:

http://dotpups.de/puppy4/dotpups/Printing/hplip_for_dingo/
or
http://puppyfiles.ca/dotpupsde/puppy4/dotpups/Printing/hplip_for_dingo

hplip-3.9.2 INSTALLATION

This modular hplip must be installed as follows, depending on the puppy series:

For puppy-4.x (Dingo):


1. tcl-8.5.1.pet (960 kb) ftp://ibiblio.org/pub/linux/distributions/puppylinux/pet_packages-3/tcl-8.5a4nothreads.pet
and tk-8.5.1.pet (659 kb) ftp://ibiblio.org/pub/linux/distributions/puppylinux/pet_packages-3/tk-8.5a4nothreads.pet
(or the corresponding nothreads versions, which are available as official series 3 packages).

2. Python-2.5.2.pet (7.4 Mb)
http://dotpups.de/puppy4/dotpups/Printing/hplip_for_dingo/Python-2.5.2.pet
(Notice: Only needed if devx-xxx.sfs is not used.
Python-2.5 is already included in the devx-xxx.sfs packages,
being xxx the suited version for Dingo)

3. http://dotpups.de/puppy4/dotpups/Printing/hpliplite/libnetsnmp-15.pet

4. hplip_dependencies.pet (11.7 Mb) (includes qt, sip, pyqt,...)
http://dotpups.de/puppy4/dotpups/Printing/hplip_for_dingo/hplip_dependencies.pet

5. hplip-3.9.2.pet (11 Mb)http://dotpups.de/puppy4/dotpups/Printing/hplip_for_dingo/hplip-3.9.2.pet

The installation opens a terminal with the licensing terms. If agreed, then installation proceeds.

NOTE For puppy's using new versions of cups, as cups-1.3.9 and cups-1.4b2, the attached hpliplite-postinstall-cups-v1.3.9-v1.4b2 postinstall is necesary. Please download it and, in a terminal, gunzip it, make it executable and execute it once.
Code:
gunzip hpliplite-postinstall-cups-v1.3.9-v1.4b2.gz
chmod +x hpliplite-postinstall-cups-v1.3.9-v1.4b2
hpliplite-postinstall-cups-v1.3.9-v1.4b2

Then restart cups:
Code:
/etc/init.d/cups stop
/etc/init.d/cups start


NOTE for previous 2.8.10 version: In case xsane does not work for this version, please try opening an rxvt terminal and type:
Code:
ln -s /usr/lib/sane/libsane-hpaio.so.1 /lib/libsane-hpaio.so.1

and try xsane again.


For puppy 3.x:

Forum member JB4x4 has found a way to bring hplip-2.8.7 to Puppy 3
Please follow his instructions in
http://www.murga-linux.com/puppy/viewtopic.php?search_id=2141909689&t=32937
to install the present hplip-2.8.10 package in pupy 3.x
Thanks JB4x4 !


Hope that helps.
Lluis
install_hp_plugin-2.0.pet
Description 
pet

 Download 
Filename  install_hp_plugin-2.0.pet 
Filesize  1.03 KB 
Downloaded  1022 Time(s) 
hpliplite-postinstall-cups-v1.3.9-v1.4b2.gz
Description 
gz

 Download 
Filename  hpliplite-postinstall-cups-v1.3.9-v1.4b2.gz 
Filesize  171 Bytes 
Downloaded  1276 Time(s) 
hpliplite-2.8.10-postinstall.sh.gz
Description 
gz

 Download 
Filename  hpliplite-2.8.10-postinstall.sh.gz 
Filesize  160 Bytes 
Downloaded  1185 Time(s) 

Last edited by lluamco on Thu 27 May 2010, 05:39; edited 26 times in total
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Wed 09 Apr 2008, 15:56    Post subject: hplip updates  

In the same addresses of the previous message, the files needed for updates to hplip 2.8.4 and hplip 2.8.5 versions can be found. Please read the appropriate README file.
Back to top
View user's profile Send private message 
Eastern Counties


Joined: 31 Jan 2006
Posts: 142
Location: UK

PostPosted: Mon 16 Jun 2008, 10:33    Post subject:  

Where do I find tcl-8.5.1.pet (960 kb) and tk-8.5.1.pet (659 kb)?
Thanks
John
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Mon 16 Jun 2008, 11:03    Post subject:  

Eastern Counties wrote:
Where do I find tcl-8.5.1.pet (960 kb) and tk-8.5.1.pet (659 kb)?
They were accessible as official packages in puppy's version 3. You can use instead
the nothreads packages: tcl-8.5a4nothreads and tk-8.5a4nothreads, which you'll find using the PETget package manager,
activating the official puppy 2 pet package repository.
In case you have further troubles, please let me know
Back to top
View user's profile Send private message 
Eastern Counties


Joined: 31 Jan 2006
Posts: 142
Location: UK

PostPosted: Mon 16 Jun 2008, 14:03    Post subject:  

Thanks for your reply, lluamco, both installed.

I'm feeling a complete dumbo because now I cannot find Python-2.5.2.pet. I've looked in all three repositories in the Puppy Package Manager, but cannot see it. I've found a 2.4 version of Python on dotpups.de - will that do?

John
Back to top
View user's profile Send private message 
Dingo


Joined: 11 Dec 2007
Posts: 1411
Location: somewhere at the end of rainbow...

PostPosted: Mon 16 Jun 2008, 15:03    Post subject:  

Eastern Counties wrote:
Thanks for your reply, lluamco, both installed.

I'm feeling a complete dumbo because now I cannot find Python-2.5.2.pet. I've looked in all three repositories in the Puppy Package Manager, but cannot see it. I've found a 2.4 version of Python on dotpups.de - will that do?

John

I have some newer python versions on dokupuppy
http://puppylover.netsons.org/dokupuppy/programs:python

_________________
replace .co.cc with .info to get access to stuff I posted in forum
dropbox 2GB free
OpenOffice for Puppy Linux

Last edited by Dingo on Sat 21 Jun 2008, 19:00; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Tue 17 Jun 2008, 03:28    Post subject:  

Eastern Counties wrote:

I cannot find Python-2.5.2.pet.

Hi John, try this link
http://dotpups.de/puppy4/dotpups/Printing/hplip_for_dingo/Python-2.5.2.pet
Back to top
View user's profile Send private message 
Eastern Counties


Joined: 31 Jan 2006
Posts: 142
Location: UK

PostPosted: Wed 18 Jun 2008, 03:26    Post subject:  

Thanks for your help with the Python pets, Dingo and Lluis, and thanks Lluis for all the new HPLIP pets. All installed and running now; I went for the 2.8.5 version. One small point: when I open the HP Toolbox, the 'Supplies' button isn't active. I had HPLIP on Puppy 3.01 and the 'Supplies' button was OK - I it used to check cartridge levels. Any way to activate it?

Thanks again

John
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Wed 18 Jun 2008, 05:10    Post subject:  

Eastern Counties wrote:
One small point: when I open the HP Toolbox, the 'Supplies' button isn't active. I had HPLIP on Puppy 3.01 and the 'Supplies' button was OK - I it used to check cartridge levels. Any way to activate it?
Hi John. Same problem here. It activates though when refreshing all printers (second left most tab or F6).
Back to top
View user's profile Send private message 
Eastern Counties


Joined: 31 Jan 2006
Posts: 142
Location: UK

PostPosted: Wed 18 Jun 2008, 05:36    Post subject:  

Thanks, Lluis
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Sun 22 Jun 2008, 04:13    Post subject: updated to hplip-2.8.6  

Updated to hplip-2.8.6
See first post
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Thu 24 Jul 2008, 08:28    Post subject:  

Updated to hplip-2.8.6b
See first post

The hplip-2.8.6 package is replaced by this hplip-2.8.6b.

Please notice, from http://hplip.sourceforge.net/release_notes.html
HPLIP 2.8.6 prematurely released code that was not intended for release. Release 2.8.6b replaces 2.8.6 and removes that code. There is no change in intended functionality as described in the release notes. We do not recommend using release 2.8.6 and ask that release 2.8.6 not be redistributed.
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Mon 04 Aug 2008, 16:39    Post subject:  

Updated to hplip-2.8.7.
See first post.
Back to top
View user's profile Send private message 
lluamco

Joined: 16 Mar 2007
Posts: 206
Location: Banyoles, Spain

PostPosted: Sat 20 Sep 2008, 04:33    Post subject:  

Updated to hplip-2.8.9
See first post.
Back to top
View user's profile Send private message 
disciple

Joined: 20 May 2006
Posts: 6378
Location: Auckland, New Zealand

PostPosted: Wed 24 Sep 2008, 22:01    Post subject:  

What would probably be useful is an "hplip-lite" package (google it).
This would apparently only be about 2MB as it would just include what you NEED for printing and scanning, and it would not require all the rubbish like Python Smile

I imagine the easiest way to build it would be to use the standard procedure to build an hpliplite deb or rpm, and then convert it to .pet

_________________
DEATH TO SPREADSHEETS
- - -
Classic Puppy quotes
- - -
Beware the demented serfers!
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 10 [143 Posts]   Goto page: 1, 2, 3, ..., 8, 9, 10 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Printers
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0870s ][ Queries: 13 (0.0072s) ][ GZIP on ]