Puppy Linux Discussion Forum

[phi_t_thuy]

Firmware is not automatically loaded.

FuturePerfect:
Please let me know how to fix this.
Could you maybe confirm/fix by just sending me a script to click on so I can load the firmware from Puppy to the 1020 before I print?

I also use a HP 1020 USB Port, it does not print when I click on 'Print test page'.

I tried with Ubuntu 7.04, it can print correctly with firmware loaded automatically.
How to do this on Puppy PC?

Thanks,


August 31, 2007

My God, it works!!!

I missed reading carefully previous instruction.

In summary:

1. I downloaded foo2zjs-i486.pet from http://www.doubleburgerbar.com/pets
2. And downloaded foo2zjs.tar.gz
3. I complied it with : make && make install -hotplug
4. Ran CUPS
5. Then selected Printer - Set it default - Printed a test page.

It printed promptly.

[koker]

Hello, Futureperfect, husspuppy, and phi_t_thuy

I,ve been reading these dialogs about installing the HP 1020, and try to do ir on a 2.17 and 3.01 and I,ve had some problems:

a) when I,ve install only the pet make for husspuppies I haven't got any thing.

b) when I've install later the a) the foo2zfjs.tar.gz I,ve not got 'make install' because it's not found the 'lp user'

c) when I've 'make install-hotplug' it's said about it's not installed vi or vim

d) I,ve not found the /etc/rc.d/rc.cups for doing /etc/rc.d/rc.cups restart


If I put it together one day I get other hp 1000 (usb aswell) works downloading the pet in puppy 300 old kernel and upgrading to 301 new kernel, I've no idea how can begin again to do it.

I've some questions:

Must I install only the foo2zjs.pet or later compile (over it) the foo2zjs.tar.gz as phi_t_thuy says he did.?

If it doesn't work, how can I modify the code for not to be asked for about the lp user and the vi or vim editor.?

Must work the foo2zjs.pet with other puppies different to 2.17?

I know this looks more like an exam than a question but I really don't know where I fail.

Thanks in advance. koker

[Turpin]

I have a Laserjet 1018. I had it working somehow in one of my past Puppy attempts that have since been wiped out. Can't remember how I did it. I wish the download link in this thread still worked.
I reread the purple instruction window in Puppy, and it instructed me to find a ppd file for my printer and copy it to the /usr/share/cups/model folder, I went back through the printer install process, it showed up as one of the options in the wizard this time, chose that, but it still just sits there when I try to print a test page.

Is this pet still available? The download link doesn't work. DOes anyone still have it? Can I get it from you? PM me maybe?
Whoah, okay, the link just showed up. That's weird, but no complaints. I wonder how some links can do that.
http://www.doubleburgerbar.com/pets/foo2zjs-i486.pet is the link.

[ttuuxxx]

Hi first read this http://foo2zjs.rkkda.com/cups/
It shows you how to configure the driver
The driver you want is included, Just extract it to the right folder and follow the install instructions on the website I just posted.
ttuuxxx

the driver can be downloaded here
http://www.linuxpackages.net/pkg_details.php?id=12056

[Wolf Pup]

HPIJS supports your printer, http://www.murga-linux.com/puppy/viewtopic.php?t=26565

[Antonio GR]

Dear Sirs:

Sorry, but I have almost the same question that the first message of this treat.

I have a HP LaserJet 1018 in a windows machine into a shared network.

I have NO problems if I printing from UBUNTU, but in Puppy seems to be a litte more dificult.

The problem I have (until now) is triyng to compile the driver from the foo2zjs file.

Acording their page (http://foo2zjs.rkkda.com) I follow the steeps into the 'rxvt terminal'.

The commands that I did sucesfully (I hope):
wget -O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz
(download)
tar zxf foo2zjs.tar.gz
foo2zjs
(unpack the file)

The problem comes with I try to 'compile' the file writting in the terminal: 'make'.

The terminal returns this error message:
'bash: make: command not found'

I hope if I have this error, I will be unable to continue.

I read that HPIJS may be do the work of compilling this driver (as the 1020) but, following the link tread I'm unable to know how install of the next step(s) to configure / install / install the firmware / etc, etc. needed.

Sorry for double ask for this, I'm sure that this a wrong procedure from my side.

Antonio

[ttuuxxx]

[Antonio GR]

Dear ttuuxxx:

Thanks a lot for your help and your time!

Now, my printer (LaserJet 1018) located in a shared xp windows network are working (I'm able to print from other PC with puppy 4.01).

I try to tell the procedure I did (If some are wrong, sorry, because there are a few steps that I hope don't must work, but...):

1.- First read the threat 'How to Access a Windows Shared Printer from Puppy 4'
http://www.murga-linux.com/puppy/viewtopic.php?t=29208

2.- Try to install the foo2zjs linux printer driver for this printer:
http://foo2zjs.rkkda.com/

3.- As I said in the previous message, if I write the steps to install this driver into the Rxvt terminal i get errror if I try to wrihte 'make', so I try to go to the directory where this driver is donwloaded and unpacket and (into ROX file manager => windows => shell terminal) I write the others commands:
Compile:
$ make

Get extra files from the web, such as .ICM profiles for color correction,
and firmware. Select the model number for your printer:
$ ./getweb 2430 # Get Minolta 2430 DL .ICM files
$ ./getweb 2300 # Get Minolta 2300 DL .ICM files
$ ./getweb 2200 # Get Minolta 2200 DL .ICM files
$ ./getweb cpwl # Get Minolta Color PageWorks/Pro L .ICM files

$ ./getweb 1020 # Get HP LaserJet 1020 firmware file
$ ./getweb 1018 # Get HP LaserJet 1018 firmware file
$ ./getweb 1005 # Get HP LaserJet 1005 firmware file
$ ./getweb 1000 # Get HP LaserJet 1000 firmware file

Install driver, foomatic XML files, and extra files:
$ su OR $ sudo make install
# make install

(Optional) Configure hotplug (USB; HP LJ 1000/1005/1018/1020):
# make install-hotplug OR $ sudo make install-hotplug

After that I'm able to add the printer into CUP'S printer wizard (selecting 'printing via Samba', founding the right driver for my printer 'a mistery' for me, but...

I did a print a text page (from CUPS) and some print text documents
from Abiword sucessfully.

If this 'chaotic' and 'non logical' procedure work for others, perfect!

So, until now I don't need your pep BUT I you think that it should be a good idea check this pep, please tell me how do it WITHOUT destroying my 'miracle-printer-configuration'.

Another question. If you suppy a pep, this is not a kind of .exe (windows therminology)?!?

A pet MUST be 'executed' from a compiller?

Again a million of thanks for your help!

[ttuuxxx]

double post

[ttuuxxx]

[Antonio GR]

[Antonio GR]

[Antonio GR]

[canbyte]

Hi ttuuxx, futureperfect, antonio, hushpuppy et al

Any possibility of revitalizing this thread to adapt it to this driver from the same author
[url]
http://foo2hiperc.rkkda.com/[/url]

Its a bit confusing because he says

[mauritroviano]

Hi, I could hotplug the hp1020 in the following way:
- download and install http://www.doubleburgerbar.com/pets/foo2zjs-i486.pet
- download and unzip http://foo2zjs.rkkda.com/foo2zjs.tar.gz

- create new directory /etc/hotplug/usb

-go to foo2zjs folder unziped and copy the file hplj1000 to /etc/hotplug/usb folder

-go to foo2zjs folder unziped and copy the file hplj10xx.rules to /etc/udev/rules.d/11-hplj10xx.rules file

-ln the terminal: ln -sf /etc/hotplug/usb/hplj1000 /etc/hotplug/usb/hplj1020

Now, try to turn off and turn on the printer. The leds would poweron and poweroff (yellow and green).

I dont know, but the packager could include this in the pet package.

Note: I follow the makefile foo2zjs for realize this hotplug.