hai
i am new to LINUX i am using puppy 4.0............
i am using wine to run a VB6 application on linux..... this application has some hardware (LPT were sms i/o) ........ the application is running on linux the problem is when click tha start button on the application the output is
Wine : call from 0x7ee5fae0 to unimplemented function hal.dll.WRITE_PROT_ULONG, aborting.
Wine : call from 0x7ee5fae0 to unimplemented function hal.dll.WRITE_PROT_USHORT, aborting.
when i typed setserial -g /dev/ttys[0123] the out put is
/dev/ttys0, UART: 16550A, PORT:0x03f8, IRQ:4
in harware information i was unable to find weather the port is connected or not.........
pl some help me to overcome this problem............
thank you......................[/list]
how to connect LPT in LINUX
hai that is i am using LED..........
LED is fixed to the port (where the printer will be connected)........
http://www.arunet.co.uk/tkboyd/LEDFig.jpg
http://photos1.blogger.com/x/blogger2/7 ... 33/LED.jpg
when enter the command wine sms.exe the output is
Wine : call from 0x7ee5fae0 to unimplemented function hal.dll.WRITE_PORT_UCHAR, aborting.
Wine : call from 0x7ee5fae0 to unimplemented function hal.dll.WRITE_PORT_UCHAR, aborting.
i don how to connect the port......
when booting the winxp the led is on.
but when booting the linux the led is off
does the wine has the power of sharing the ports.........
pl help me out.............. thanks for u reply............
LED is fixed to the port (where the printer will be connected)........
http://www.arunet.co.uk/tkboyd/LEDFig.jpg
http://photos1.blogger.com/x/blogger2/7 ... 33/LED.jpg
when enter the command wine sms.exe the output is
Wine : call from 0x7ee5fae0 to unimplemented function hal.dll.WRITE_PORT_UCHAR, aborting.
Wine : call from 0x7ee5fae0 to unimplemented function hal.dll.WRITE_PORT_UCHAR, aborting.
i don how to connect the port......
when booting the winxp the led is on.
but when booting the linux the led is off
does the wine has the power of sharing the ports.........
pl help me out.............. thanks for u reply............
I don't have any experience using Wine.
I see now that the Windows VB6 program is trying to access the pins on the parallel port.
You might want to look at this program - http://parapin.sourceforge.net/
http://www.faqs.org/docs/Linux-mini/IO- ... mming.html
http://www.captain.at/howto-parallel-po ... isters.php
My question is why are you trying to do this in Linux?
I see now that the Windows VB6 program is trying to access the pins on the parallel port.
You might want to look at this program - http://parapin.sourceforge.net/
http://www.faqs.org/docs/Linux-mini/IO- ... mming.html
http://www.captain.at/howto-parallel-po ... isters.php
My question is why are you trying to do this in Linux?