Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 23 Sep 2014, 04:39
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Printers
Canon pixma printer drivers
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 11 [153 Posts]   Goto page: 1, 2, 3, ..., 9, 10, 11 Next
Author Message
Patriot


Joined: 15 Jan 2009
Posts: 734

PostPosted: Mon 05 Oct 2009, 07:45    Post subject:  Canon pixma printer drivers
Subject description: for Pixma (IP/MP/MX) models v2.70 up-to v3.30
 

Hmmm .....

These are canon pixma (inkjet/multifunction) printer drivers grouped by release versions. They have been rebuilt from source for the puppy platform. Canon driver sets v2.90 & v2.80 have been patched for cups backend naming compliance. The backend drivers will work with any CUPS version. The original backends were named cnij_usb and CUPS 1.3.x+ will reject backends with underscores. The patched usb backend (included in all driver pets here) is basically the same to the ones in canon common v3.00 driver.

Canon Pixma/MFP Driver(s) & related software(s)

CUPS Canon bjnp wireless connectivity v0.5.4 [download]
Usage notes:
i) For canon models with wireless interface
ii) For use with canon driver sets v3.00 and below
iii) CUPS Requirements: 1.3.x and above
iv) Note: Only supports CUPS 1.2 and above,
. but actual support is determined during compilation.
. The module here was compiled with CUPS 1.3.10 ...
v) Firewall: If you are unable to see the printer listed,
. you may have to open canon bjnp ports 8611, 8612,
. 8613 and 8614 (all tcp/udp).



Canon common drivers v3.00 [download]
- Provided for canon printer owners (using existing drivers < v3.00)
who may be experiencing "illegal backend" error after upgrading to
recent CUPS versions. (Not required for driver packages listed here.).

From v3.30 driver source
1. ip2700 series [download]

2. mx340 series [download]
3. mx350 series [download]
4. mx870 series [download]

From v3.20 driver source
1. ip4700 series [download]

2. mp250 series [download]
3. mp270 series [download]
4. mp490 series [download]
5. mp550 series [download]
6. mp560 series [download]
7. mp640 series [download]

From v3.10 driver source
1. mx320 series [download]
2. mx330 series [download]
3. mx860 series [download]

From v3.00 driver source
1. ip1900 series [download]
2. ip3600 series [download]
3. ip4600 series [download]

4. mp190 series [download]
5. mp240 series [download]
6. mp540 series [download]
7. mp630 series [download]

From v2.90 driver source
1. ip100 series [download]
2. ip2600 series [download]

From v2.80 driver source
1. ip3500 series [download]
2. ip4500 series [download]

3. mp140 series [download]
4. mp210 series [download]
5. mp520 series [download]
6. mp610 series [download]


(Please pm me if any of the download links doesn't work)


The models listed below are from v2.50-v2.70 driver sets. They use GTK1 interface and requires updating to GTK2. I did some preliminary updates to v2.50 drivers (note: untested) but have since begun merging all the previously defined models into v3.00 source. As these will take a lot of time to do, the models listed below will only be built on a case-by-case basis (as time permits).

v2.70 driver source defined models
[Merging into v3.00 completed]
ip90, ip1800, ip2500, ip3300, ip4300
mp160, mp510, mp600

v2.60 driver source defined models
ip2200, ip4200, ip6600, ip7500
mp500

v2.50 driver source defined models
ip1000, ip1500, ip3100, ip4100, ip8600



Rgds


._.
cups-bjnp-0.5.4-i486.pet
Description  bj-net-print for certain canon mfp
pet

 Download 
Filename  cups-bjnp-0.5.4-i486.pet 
Filesize  10.71 KB 
Downloaded  2082 Time(s) 
canon-common-3.00-i486.pet
Description  usb backend update
pet

 Download 
Filename  canon-common-3.00-i486.pet 
Filesize  22.24 KB 
Downloaded  2547 Time(s) 

Last edited by Patriot on Fri 10 Sep 2010, 21:54; edited 11 times in total
Back to top
View user's profile Send private message 
Patriot


Joined: 15 Jan 2009
Posts: 734

PostPosted: Mon 05 Oct 2009, 07:48    Post subject:  

Hmmm .....

The drivers listed below are my current attempt at merging some of the printer models defined from v2.50 - v2.70 into the v3.00 driver source. All drivers from v2.50 up-to v2.70 are gtk1 based and all drivers from v2.80 upwards are gtk2 based. Merging them should make our life simpler .....

Driver packages will be prepared only if there is a request for a particular model and also subject to time availability. No time frame is set for completion.

Please note that these packages should be considered to be preliminary tests drivers. Kindly report any issues that you may have when using these drivers. I will take note of the issues (if any) arising from these driver packages but please remember that I'm lame with C and a total klutz with GTK ..... debugging will take some time .....


Canon drivers merged into v3.00:

1. ip90 series download
2. ip1800 series download
3. ip2500 series download
4. ip3300 series download
5. ip4300 series download

6. mp160 series download
7. mp510 series download
8. mp600 series download

9. mp620 (stalled - no time frame set)



- to be continued -

._.

Last edited by Patriot on Fri 10 Sep 2010, 22:09; edited 6 times in total
Back to top
View user's profile Send private message 
Patriot


Joined: 15 Jan 2009
Posts: 734

PostPosted: Mon 05 Oct 2009, 07:48    Post subject:  

Here be dragons
Back to top
View user's profile Send private message 
mbridges1

Joined: 01 Oct 2009
Posts: 35
Location: Lee's Summit, MO

PostPosted: Wed 07 Oct 2009, 09:42    Post subject:  

I am new to Puppy and love it so far, even though I've been having problems with sound.

I have Puppy 430 on a Gateway 400 Tower, and an old Compaq desktop. I would like to use the Compaq as a host for my Canon iP1800 printer for my home network. My other systems on my network are a Dell Dimension desktop running Windows Vista and a Dell Inspiron laptop running Windows XP.

Two questions.
1) What do I need to do to Puppy to let the Windows systems recognize them on my network?
2) How can I get a driver for my Canon iP1800 printer for Puppy?

Thank you.
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger 
mikeb


Joined: 23 Nov 2006
Posts: 8253

PostPosted: Wed 07 Oct 2009, 09:53    Post subject:  

Brilliant work as usual.
For an ip4600 would I use the ip4500 driver or perhaps the one in the latest gutenprint,

regards

mike
Back to top
View user's profile Send private message 
DaveS


Joined: 09 Oct 2008
Posts: 3726
Location: UK

PostPosted: Wed 07 Oct 2009, 10:41    Post subject:  

mikeb wrote:
Brilliant work as usual.
For an ip4600 would I use the ip4500 driver or perhaps the one in the latest gutenprint,

regards

mike


I tried the latest Gutenprint driver Mike, but it prints greys very dark. Perfectly acceptable for letters etc, but graphics printed dark and 'pixy'

_________________
Spup Frugal HD and USB
Root forever!
Back to top
View user's profile Send private message 
mikeb


Joined: 23 Nov 2006
Posts: 8253

PostPosted: Wed 07 Oct 2009, 14:27    Post subject:  

My eyesight is dodgy...I see ip4600 in the list now Embarassed .
...or was it sneaked in Very Happy

Well many thanks for yet more hardware support Smile

regards

mike
Back to top
View user's profile Send private message 
Patriot


Joined: 15 Jan 2009
Posts: 734

PostPosted: Fri 09 Oct 2009, 07:18    Post subject:  

Hmmm .....

mbridges1 wrote:
........Two questions.
1) What do I need to do to Puppy to let the Windows systems recognize them on my network?
2) How can I get a driver for my Canon iP1800 printer for Puppy?

1. If you meant having a printer on puppy pc shared to other windows pcs, then there's a few ways to get it done. Check this thread out ...

2. I am working on merging the older drivers into the newer versions. Since your canon model is in the older versions, I've prep up a test driver package (look above) for you to try (Welcome volunteer...!) ..... Please post some report if you gave it a shot .....

Please open a new thread for your issues for further discussion if required.


Rgds
Back to top
View user's profile Send private message 
Patriot


Joined: 15 Jan 2009
Posts: 734

PostPosted: Fri 09 Oct 2009, 07:27    Post subject:  

Hmmm .....

Laughing

mikeb wrote:
My eyesight is dodgy...I see ip4600 in the list now Embarassed .
...or was it sneaked in Very Happy
.....

Those light blue colored links sure made it easy to miss certain words/numbers ... I'll try to arrange them later on so that they'll be easy on the eyes ...

I sure hope these drivers works alright .....


Rgds
Back to top
View user's profile Send private message 
mikeb


Joined: 23 Nov 2006
Posts: 8253

PostPosted: Fri 09 Oct 2009, 12:20    Post subject:  

Quote:

I sure hope these drivers works alright .....

Since when have you made anything that does not????
I will be getting a new printer shortly so can give feedback then

regards

mike
Back to top
View user's profile Send private message 
plankenstein


Joined: 15 Nov 2008
Posts: 121
Location: Arkansas, USA

PostPosted: Fri 09 Oct 2009, 13:36    Post subject:  

Patriot,

you are absolutely amazing! I know for a fact that these drivers will make the lives of many puppians alot easier. ( It sure helped me a bundle ) THANK YOU and THREE CHEERS FOR PATRIOT!!!!

plankenstein

_________________
I carefully plan ALL my random acts! Laughing
Back to top
View user's profile Send private message 
ALand

Joined: 11 Oct 2009
Posts: 2

PostPosted: Sun 11 Oct 2009, 17:18    Post subject:  

Hi Patriot - Thanks for the Canon drivers. NewEgg just delivered a MX860 to play with. The driver loads well with CUPs 1.3.3 and seems to communicate with the printer (even told me the printer was busy while by son printed homework) but the printer does not spit out a printed page. I've got the check on allow desktop to print to server under Admin page. Any ideas. Thanks
Back to top
View user's profile Send private message 
mbridges1

Joined: 01 Oct 2009
Posts: 35
Location: Lee's Summit, MO

PostPosted: Sun 11 Oct 2009, 17:29    Post subject:  

Patriot
Exclamation
Just a quick not to let you know I have tried the drivers you mentioned and they worked without modifications in my Puppy 430 on the old OLD Compaq system. Very Happy

Patriot wrote:
Hmmm .....

The drivers listed below are my current attempt at merging some of the printer models defined from v2.50 - v2.70 into the v3.00 driver source. All drivers from v2.50 up-to v2.70 are gtk1 based and all drivers from v2.80 upwards are gtk2 based. Merging them should make our life simpler .....

Driver packages will be prepared only if there is a request for a particular model and also subject to time availability. No time frame is set for completion.

Please note that these packages should be considered to be preliminary tests drivers. Kindly report any issues that you may have when using these drivers. I will take note of the issues (if any) arising from these driver packages but please remember that I'm lame with C and a total klutz with GTK ..... debugging will take some time .....


Canon drivers merged into v3.00:

1. ip1800 download

2. mp600 download

3. mp620 WIP (no time frame set)



- to be continued -

._.


Thank you
mbridges1 Very Happy
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger 
mbridges1

Joined: 01 Oct 2009
Posts: 35
Location: Lee's Summit, MO

PostPosted: Sun 11 Oct 2009, 17:36    Post subject:  

Also,

I was successful in sharing my Puppy iP1800 printer across my home network to two systems:

1) a Gateway 2000 running Puppy 430 [no work needed]
2) a Dell Inspiron B120 laptop running Windows XP SP2 [just had to configure the printer via http]

I was UN-successful in sharing the Puppy iP1800 printer to a third system, a Dell Dimension desktop running Windows Vista. Will keep researching this one.
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger 
Patriot


Joined: 15 Jan 2009
Posts: 734

PostPosted: Mon 12 Oct 2009, 10:58    Post subject:  

Hmmm .....

mbridges1 wrote:
........
I was successful in sharing my Puppy iP1800 printer across my home network to two systems:

1) a Gateway 2000 running Puppy 430 [no work needed]
2) a Dell Inspiron B120 laptop running Windows XP SP2 [just had to configure the printer via http]

I was UN-successful in sharing the Puppy iP1800 printer to a third system, a Dell Dimension desktop running Windows Vista. Will keep researching this one.

Thank you for letting me know that the merged driver works ok for the ip1800. I should be able to complete all v2.70 model merging soon.

For accessing puppy shared printer from vista, I found this wiki that may be of some help to you .....

Rgds
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 11 [153 Posts]   Goto page: 1, 2, 3, ..., 9, 10, 11 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Printers
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0975s ][ Queries: 13 (0.0075s) ][ GZIP on ]