Macpup Foxy 3.0

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
runtt21
Posts: 1649
Joined: Sun 08 Jun 2008, 02:43
Location: BigD Texas
Contact:

#21 Post by runtt21 »

I will be posting extra themes in a while . Hang on ......I am making .pets out of theme so all you do is install the pet and it will put the theme right where it goes. Then just open up the theme setter and change it.

User avatar
runtt21
Posts: 1649
Joined: Sun 08 Jun 2008, 02:43
Location: BigD Texas
Contact:

#22 Post by runtt21 »

Today is a good day :D We are back in the top 10 on DW !!!!! We have stayed on the top 100 list since last August.
Attachments
foxday1a.jpg
(33.46 KiB) Downloaded 2328 times

User avatar
runtt21
Posts: 1649
Joined: Sun 08 Jun 2008, 02:43
Location: BigD Texas
Contact:

#23 Post by runtt21 »

OK , I have some extra themes for everyone. They are in two .pets . The first is the Fox3extra.pet it has the two themes that I was going to put in Fox 3 but left out to keep the .iso size down around that of opera061's . The themes are A-wood-macpup2.edj and Macpup-WB.edj

The second is Next-1.pet It has the A-SBlack-Esp1Macpup.edj and the updated version of that theme Luxblue-macpup.edj It also has two backgrounds, stars.edj is a standalone version of the background from A-SBlack-Esp1Macpup complete with animated stars. And stars2.edj that is a animated version of the background from the Luxblue theme that has stars cause the theme background dosen't.

All of these themes are by Verdegal37 and I modified them for Macpup.Just install the .pets and select the new themes......

http://macpup.org/runtt21/

There are other themes and backgrounds on my page most of them will get repackaged into .pet's this week. Enjoy !!! :D

User avatar
runtt21
Posts: 1649
Joined: Sun 08 Jun 2008, 02:43
Location: BigD Texas
Contact:

#24 Post by runtt21 »


User avatar
russoodle
Posts: 707
Joined: Fri 12 Sep 2008, 17:36
Location: Down-Under in South Oz

#25 Post by russoodle »

runtt21 wrote:Today is a good day :D We are back in the top 10 on DW !!!!! We have stayed on the top 100 list since last August.
Yep...today's getting even better :D

Thanks for those extra themes, Runtt.
Attachments
foxday2.jpg
#7....congratulations guys!
(77.88 KiB) Downloaded 2248 times
[i][color=Green][size=92]The mud-elephant, wading thru the sea, leaves no tracks..[/size][/color][/i]

User avatar
pri
Posts: 342
Joined: Fri 09 Oct 2009, 18:31
Location: Bandung Indonesia
Contact:

virtual partition on desktop

#26 Post by pri »

there is a way to make a virtual partition on a desktop?

when i was instaled XFCE on macpup, there is a virtual partition on my macpup. so my be there is a way to make a virtual partition on desktop, it will be make macpup more user friendly.

pri

User avatar
pri
Posts: 342
Joined: Fri 09 Oct 2009, 18:31
Location: Bandung Indonesia
Contact:

#27 Post by pri »

here is screenshoot
Attachments
desktop partition .png
(116.47 KiB) Downloaded 2247 times
Last edited by pri on Wed 02 Dec 2009, 23:12, edited 2 times in total.
Learning by Doing

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#28 Post by James C »

Simply put......a fantastic looking puplet. :)

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#29 Post by Colonel Panic »

Just downloaded it now, and made a (frugal) install on the Community Centre computer.

It certainly looks good / impressive, but I don't know how people will take to virtual desktops Enlightenment uses - move the mouse too far one way or another (left or right) over the edge of the application window and you're looking at a blank screen instead of Firefox etc.

This might be too much for some of the centre's users, who vary in condiidence and knowledge where computers are concerned.
Can you turn off virtual desktops in Enlightenment?

BTW, I was very impressed by the automatic configuration mode in CUPS; it not only detected the two networked printers we've got here, but identified them and set them up without my having to do anything.

CUPS has come on a long way since Eric Raymond famously failed to set up a networked printer using it (as well as Puppy's implementation of it being accurate and comprehensive).
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
russoodle
Posts: 707
Joined: Fri 12 Sep 2008, 17:36
Location: Down-Under in South Oz

#30 Post by russoodle »

Colonel Panic wrote:...
It certainly looks good / impressive, but I don't know how people will take to virtual desktops Enlightenment uses - move the mouse too far one way or another (left or right) over the edge of the application window and you're looking at a blank screen instead of Firefox etc.

This might be too much for some of the centre's users, who vary in condiidence and knowledge where computers are concerned.
Can you turn off virtual desktops in Enlightenment?...
Hi Colonel Panic...yes, if you just check Runtt's first post on this release, he describes how to go about it....he forgot to turn it off :D
[i][color=Green][size=92]The mud-elephant, wading thru the sea, leaves no tracks..[/size][/color][/i]

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#31 Post by Colonel Panic »

runtt21 wrote:One thing I forgot to do is to turn the edge bindings off. If you hang a app off the edge or slam the pointer into the edge it will change desktops. Alot of times when you dont want it to. To fix this go to menu-settings-settings panel. In the app that opens on the top go to input then select edge bindings. In the next window select delete all then apply and close. You can also change the binding to do other stuff....
Thanks, I'll give this a try soon.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#32 Post by Colonel Panic »

runtt21 wrote:One thing I forgot to do is to turn the edge bindings off. If you hang a app off the edge or slam the pointer into the edge it will change desktops. Alot of times when you dont want it to. To fix this go to menu-settings-settings panel. In the app that opens on the top go to input then select edge bindings. In the next window select delete all then apply and close. You can also change the binding to do other stuff....
Thanks, I'll give this a try soon.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
runtt21
Posts: 1649
Joined: Sun 08 Jun 2008, 02:43
Location: BigD Texas
Contact:

#33 Post by runtt21 »

@ Pri XFCE in puppy is Gray's project not ours. We do e17 .

Everyone else please download for our wed site , Please don't use the direct link. Thank you !!!

User avatar
pri
Posts: 342
Joined: Fri 09 Oct 2009, 18:31
Location: Bandung Indonesia
Contact:

#34 Post by pri »

@ Pri XFCE in puppy is Gray's project not ours. We do e17 .
whose tooking xfce?

@runtt21 : do you not get.

look again to the pic i upload , i was change the pic, so u can get what i mean.
Learning by Doing

User avatar
runtt21
Posts: 1649
Joined: Sun 08 Jun 2008, 02:43
Location: BigD Texas
Contact:

#35 Post by runtt21 »

If you want to have icons all over the top of your desktop be my guest. Everything anyone needs to run a Macpup is on the ibar. It doesn't need anything else.

Mr. A
Posts: 12
Joined: Sun 26 Jul 2009, 20:40

#36 Post by Mr. A »

I'm having a problem booting this with my usual frugal setup. My Dell Latitude C400 doesn't have a CD drive and can't boot to USB, so I put the frugal files for Puppy installs in the root of my only partition (ntfs for running Windows XP). Grub4DOS lets me set up my grub menu in windows, and this method works fine for Puppy 4.21, Puppy 4.3, and Macpup Opera 061. Not so for Macpup Foxy 3.0 though. Here's my Grub menu.lst and the resulting error:

menu.lst entry

Code: Select all

title Macpup Foxy 3 frugal 

rootnoverify (hd0,0)

kernel (hd0,0)/vmlinuz pmedia=idehd 

initrd (hd0,0)/initrd.gz
Grub error

Code: Select all

Error 13: Invalid or unsupported executable format
I found this description of the error:
This error is returned if the kernel image being loaded is not recognized as Multiboot or one of the supported native formats (Linux zImage or bzImage, FreeBSD, or NetBSD).
Anybody have any idea what's up with that?

User avatar
pri
Posts: 342
Joined: Fri 09 Oct 2009, 18:31
Location: Bandung Indonesia
Contact:

icon partition or flashdisk on macpup

#37 Post by pri »

ok i give up :(

but i think there is macpup user who need this think, so i made pet for it.

here is link :
http://murga-linux.com/puppy/viewtopic. ... 293#368293
Learning by Doing

ragaman
Posts: 186
Joined: Sun 14 Jan 2007, 12:55

#38 Post by ragaman »

How about using the module called "Places" for this. It's even better than the one you posted.

User avatar
pri
Posts: 342
Joined: Fri 09 Oct 2009, 18:31
Location: Bandung Indonesia
Contact:

#39 Post by pri »

ragaman wrote:How about using the module called "Places" for this. It's even better than the one you posted.
places? sure! why not (i have hear it now) if its was better why not ( we on this forum make puppy beter, right?).

from begining i was ask what was hapend when i instaled xfce on macpup, so i am asked, how if on desktop there are a partition or flashdisk icon, so user willbe helpful by that (i am as user)

so how to use this places thing ? :D
Learning by Doing

ragaman
Posts: 186
Joined: Sun 14 Jan 2007, 12:55

#40 Post by ragaman »

I'm not so sure how to install the places modules (or any module) on e17. The places module came preloaded on the MoonOS I'm using. Maybe runtt can help us install this useful e17 module?

I tried copying the places modules from usr/lib/enlightenment/modules of MoonOS. The places showed up at the module loader but coughed up an error (missing file) when I loaded it.


Here's a screenshot of the places module.
Attachments
places.jpg
(52.36 KiB) Downloaded 1264 times

Post Reply