HI playdayz,
I tested a little bit more and now I can definitively say, all I need are libreadline.so.6.0 with link to libreadline.so.6 and libnl.so.1.1 with link to libnl.so.1 (all in /lib) to get Network Wizard working. At last I don't need any command from console.
I tested without any savefile. Also removing and reloading ath5k with modprobe before running the wizard didn't help without the two files.
I installed kino_1.3.3, project-x and devede from repo. Devede doesn't work, too many dependencies.The others are working fine.
I also installed Skype, Everest, Truecrypt, Tvbrowser. All are working fine.
Also Opera-10.10-portable works out of the box.
~ Rolf
Karmic Puppy uPup 4.58 w/ GLX/DRI - Latest Woof FEB 16
booting on OLPX XO-1!
Way to go playdayz!
Your Karmic uPup with an OLPC XO-1 kernel did boot my XO-1 all the way to the desktop!
The xorg wizard did not auto detected it but after adjusting the frequencies and picking a resolution load the correct driver and resolution (1200x900) all by itself!
The mouse does not work yet (I believe it need the evdev driver for touchpad and keyboard) and the desktop application icons are all the same but i was sure glad to see the puppy logo on the screen
..and here is a picture http://www.flickr.com/photos/35623379@N07/4175514880/
Your Karmic uPup with an OLPC XO-1 kernel did boot my XO-1 all the way to the desktop!
The xorg wizard did not auto detected it but after adjusting the frequencies and picking a resolution load the correct driver and resolution (1200x900) all by itself!
The mouse does not work yet (I believe it need the evdev driver for touchpad and keyboard) and the desktop application icons are all the same but i was sure glad to see the puppy logo on the screen
..and here is a picture http://www.flickr.com/photos/35623379@N07/4175514880/
-
oui
Re: uPup Made with Woof 20091120 w/ GLX/DRI
Hi
i have to start ubuntu to get "new lightness"
after ubuntun, I can start uPup 450 again one time...
(same problem with puppy 431!)
bye
it works pretty with "radeonhd" on my acer emachine laptop (with AMD64 ATI Radeon) but only one time. after that, puppy turn the lightness of the lcd screen down and it it not possible to start again directly with puppy any more...playdayz wrote:If you have an ATI card[/b] that doesn't start correctly, you might try among the "ati," "radeon," and "radeonhd" drivers.
i have to start ubuntu to get "new lightness"
after ubuntun, I can start uPup 450 again one time...
(same problem with puppy 431!)
bye
Response re glxinfo and glxgears test
Hi playdayz,
I tried both glxinfo and glxgears and I didn't get an error message (but I am not expert at interpreting the glxinfo output).
Is it normal for 32 GLX visuals and 128 GLXFBConfigs to have values of "Slow" and "None"? These are the only values reported and alternate with each other.
Glxgears popped up and kept going very nicely and smoothly. Without urging from me, it closed itself without an error message. I assume that is normal?
Having checked that, I tried flash again from the site that crashed previously, using the default SeaMonkey install (1.1.18). Today, it is working just fine.
I haven't tried the voicemail gxine system crash yet. I will write back after sending this message with the results of that test.
I will also recheck the results after installing the Iron-linux you referenced in another thread (that you said worked with upup 432).
All of this is being done via the live-CD without saving the setup between sessions.
Steve
I tried both glxinfo and glxgears and I didn't get an error message (but I am not expert at interpreting the glxinfo output).
Is it normal for 32 GLX visuals and 128 GLXFBConfigs to have values of "Slow" and "None"? These are the only values reported and alternate with each other.
Glxgears popped up and kept going very nicely and smoothly. Without urging from me, it closed itself without an error message. I assume that is normal?
Having checked that, I tried flash again from the site that crashed previously, using the default SeaMonkey install (1.1.18). Today, it is working just fine.
I haven't tried the voicemail gxine system crash yet. I will write back after sending this message with the results of that test.
I will also recheck the results after installing the Iron-linux you referenced in another thread (that you said worked with upup 432).
All of this is being done via the live-CD without saving the setup between sessions.
Steve
Additional response about av problems
During the same boot, after I tested the SeaMonkey 1.1.18 browser for flash, I installed and tested the Iron-Linux browser. This still reports an error (the libflashplayer.so crashed). The browser stays open and responsive, however.
Next, I tested the function of audio by launching an internet radio station and attempting to listen via the "iTunes" version (a .pls file).
This worked fine with the SeaMonkey browser via gxine. However, with Iron, a little window with a down facing arrow opens and then a browser window launches with the title about:blank. No error message.
Then, I checked the voicemail in my Yahoo account. With the SeaMonkey browser, I get the new Yahoo interface and when I select a voicemail message, a message window opens with a link that with my usual puppy running (4.2.1), launches a gxine browser window and plays the message. With this pup (upup432), the screen becomes black except for the mouse cursor, and the system abruptly becomes nonresponsive. I have to use the power button to shut and restart the system.
Before this, I checked the vociemail in the Iron browser. Yahoo did not support this browser with the new email interface, so I ran the old interface, which seemed to work fine. However, when I attempted to run the voicemail message, this led to the display of a new blank tab with the title about:blank.
Let me know if there is anything else you would like me to check.
At this point, it looks as if I can use this version of seamonkey to view flash and listen to internet radio, but not Iron. I can't use a browser on upup432 to check my voicemail on Yahoo.
I was able to do all these things with the SeaMonkey 2 pet that includes the 10.22 flash (I will retry that and get back to you if that has changed).
Steve
Next, I tested the function of audio by launching an internet radio station and attempting to listen via the "iTunes" version (a .pls file).
This worked fine with the SeaMonkey browser via gxine. However, with Iron, a little window with a down facing arrow opens and then a browser window launches with the title about:blank. No error message.
Then, I checked the voicemail in my Yahoo account. With the SeaMonkey browser, I get the new Yahoo interface and when I select a voicemail message, a message window opens with a link that with my usual puppy running (4.2.1), launches a gxine browser window and plays the message. With this pup (upup432), the screen becomes black except for the mouse cursor, and the system abruptly becomes nonresponsive. I have to use the power button to shut and restart the system.
Before this, I checked the vociemail in the Iron browser. Yahoo did not support this browser with the new email interface, so I ran the old interface, which seemed to work fine. However, when I attempted to run the voicemail message, this led to the display of a new blank tab with the title about:blank.
Let me know if there is anything else you would like me to check.
At this point, it looks as if I can use this version of seamonkey to view flash and listen to internet radio, but not Iron. I can't use a browser on upup432 to check my voicemail on Yahoo.
I was able to do all these things with the SeaMonkey 2 pet that includes the 10.22 flash (I will retry that and get back to you if that has changed).
Steve
Additional addendum: flash in Iron with upup 432
I checked the libflashplayer.so file. There is only one version on the upup432, located in /usr/lib/mozilla/plugins (and with a copy in initrd).
I noticed that the owner and group of libflashplayer.so are ftp/ftp unlike the two other files in the plugins directory which are root/root.
Is this as it is supposed to be?
Steve
I noticed that the owner and group of libflashplayer.so are ftp/ftp unlike the two other files in the plugins directory which are root/root.
Is this as it is supposed to be?
Steve
New Version uPup 4.51 Made with Woof 2009-1211
New Version uPup Karmic 4.51 Made with Woof 2009-1211
Posted in the first message of this thread, a uPup, that is a Puppy based on Ubuntu 9.10 Karmic made with Woof 2009-1211, numbered 4.51, this is the development of the uPup 4.32 that started this thread.
Posted in the first message of this thread, a uPup, that is a Puppy based on Ubuntu 9.10 Karmic made with Woof 2009-1211, numbered 4.51, this is the development of the uPup 4.32 that started this thread.
I added links to
Flashplayer 10.0.42 and
Flashplayer 10.1pre, as well as
Seamonkey 2.0 and
Firefox 3.6b6pre and the
upup_devx_4.51
Go-OpenOffice 3.1.1
to the first message in this thread.
@stevesr0, thanks for all the testing.
Concerning Seamonkey. There is a link in the first message to Seamonkey 2.0. In my experience it is significantly faster than 1.1.18. Barry has found some problems in one of his blog posts, but they are not deal breakers, imo.
Also in the first message there are links to Flashplayer 10.0.42 and 10.1pre. I have been using both of them with Seamonkey 2 and Firefox 3.6b6rpe without mishap.
#oui, Maybe it would be worth while to compile the ATI Catalyst driver; that way you get the Catalyst Control Center as well as the driver. It is proprietary but I can live with that myself. You would need a full install or a frugal install with 1GB Save file, mainly because SitHeelSpeaks gcc 4.4.1 will take 300-400MB. But this uPup (and I think the others) won't compile without it. Someone might could fix that. I had good luck with SitHeelSpeaks version though. There is some discussion in the first message. You would need the devx, SHS's gcc, and the kernel sources, all links in the first message, plus the ATI Catalyst install, also a link. If it is not enough, please ask questions.
Flashplayer 10.0.42 and
Flashplayer 10.1pre, as well as
Seamonkey 2.0 and
Firefox 3.6b6pre and the
upup_devx_4.51
Go-OpenOffice 3.1.1
to the first message in this thread.
@stevesr0, thanks for all the testing.
No I don't think it should close by itself. First off, if the gears spin then that means glx is installed and running. You can also see that in Menu -> System status and Config -> Hardinfo -> Display and scroll down to the glx section. But I let mine run for 30 minutes and it just kept reporting every 5 seconds, not stopping. Did it close the glxgears window and also the terminal window?Glxgears popped up and kept going very nicely and smoothly. Without urging from me, it closed itself without an error message. I assume that is normal?
Concerning Seamonkey. There is a link in the first message to Seamonkey 2.0. In my experience it is significantly faster than 1.1.18. Barry has found some problems in one of his blog posts, but they are not deal breakers, imo.
Also in the first message there are links to Flashplayer 10.0.42 and 10.1pre. I have been using both of them with Seamonkey 2 and Firefox 3.6b6rpe without mishap.
#oui, Maybe it would be worth while to compile the ATI Catalyst driver; that way you get the Catalyst Control Center as well as the driver. It is proprietary but I can live with that myself. You would need a full install or a frugal install with 1GB Save file, mainly because SitHeelSpeaks gcc 4.4.1 will take 300-400MB. But this uPup (and I think the others) won't compile without it. Someone might could fix that. I had good luck with SitHeelSpeaks version though. There is some discussion in the first message. You would need the devx, SHS's gcc, and the kernel sources, all links in the first message, plus the ATI Catalyst install, also a link. If it is not enough, please ask questions.
Paydayz,
upup451 looks very good to me
Observations:
The md5sums seem to have been swaped.
I get 821777303bff3e2d01877965da8092bc upup-451.iso
175de6625dfb7d43d0aa691612916b19 upup_devx_451.sfs
My Belkin USB2.0 WLAN is working and autoconnects at reboot.
Trying to setup CUPS printing failed due to "500 Internal Server Error". But installing the cups-1.3.10-1-uj pet made installation of my Okipage 14ex printer possible.
On a different subject. Should you be interested in the difference between Woof tarballs, the attached perl script may be useful. For example:
To compare woof-20091210085845.tar.gz to woof-20091212121034.tar.gz, you type
./woofdiff.pl 20091210085845 20091212121034 to get
---- No files deleted from woof-20091210085845.tar.gz ----
---- Files added to woof-20091212121034.tar.gz ----
de-latin1.gz
---- Updated files ----
DISTRO_PKGS_SPECS-t2-8.0rc
2createpackages
HISTORY_DISTRO_SPECS
HISTORY_3builddistro
DISTRO_SPECS
Packages-puppy-quirky-official
woof_gui_tabs
puppyinstaller
bones
---- For detailed information use option -v ----
Regards, Olov
upup451 looks very good to me
Observations:
The md5sums seem to have been swaped.
I get 821777303bff3e2d01877965da8092bc upup-451.iso
175de6625dfb7d43d0aa691612916b19 upup_devx_451.sfs
My Belkin USB2.0 WLAN is working and autoconnects at reboot.
Trying to setup CUPS printing failed due to "500 Internal Server Error". But installing the cups-1.3.10-1-uj pet made installation of my Okipage 14ex printer possible.
On a different subject. Should you be interested in the difference between Woof tarballs, the attached perl script may be useful. For example:
To compare woof-20091210085845.tar.gz to woof-20091212121034.tar.gz, you type
./woofdiff.pl 20091210085845 20091212121034 to get
---- No files deleted from woof-20091210085845.tar.gz ----
---- Files added to woof-20091212121034.tar.gz ----
de-latin1.gz
---- Updated files ----
DISTRO_PKGS_SPECS-t2-8.0rc
2createpackages
HISTORY_DISTRO_SPECS
HISTORY_3builddistro
DISTRO_SPECS
Packages-puppy-quirky-official
woof_gui_tabs
puppyinstaller
bones
---- For detailed information use option -v ----
Regards, Olov
- Attachments
-
- woofdiff.pl.gz
- Calculates the difference between tarballs
- (947 Bytes) Downloaded 681 times
Got it. Thanks.The md5sums seem to have been swaped.
I get 821777303bff3e2d01877965da8092bc upup-451.iso
175de6625dfb7d43d0aa691612916b19 upup_devx_451.sfs
That is good news. Mine too.My Belkin USB2.0 WLAN is working and autoconnects at reboot.
Install *and* print correctly? Just being careful. cups-1.3.10-1-uj is the one that is supposed to be in there. It is in there but it is possible something gets whacked by something else that is there and adding the pet restores workability. I should be able to compare before and after--thanks for the good info. I have successfully avoided cups all my life but I guess I am old enough nowTrying to setup CUPS printing failed due to "500 Internal Server Error". But installing the cups-1.3.10-1-uj pet made installation of my Okipage 14ex printer possible.
And thanks for the script. Have you posted it where others using Woof can find it? Maybe as a comment on Barry's blog; he will want to see it I would think. I have been thinking I could make a contribution by building a Woof Karmic Puplet for the "milestones" in Woof development, in which case the script could be extremely useful. Woof-karmic is my everyday Linux now so this is something I would be doing anyway.
.
alsaconf
I'm using your uPup 451 on the OLPC XO-1 laptop and so far I had 2 problems.
Wireless connects to open Access Points but not encrypted ones. I guess I could live with this.
Sound is not working because the card is not detected (Marvell sc5535) but then alsaconf fails to run because the required mktemp command does not exist.
Wireless connects to open Access Points but not encrypted ones. I guess I could live with this.
Sound is not working because the card is not detected (Marvell sc5535) but then alsaconf fails to run because the required mktemp command does not exist.
hey mavrothal, The mktemp.pet is in this repo http://distro.ibiblio.org/pub/linux/dis ... ackages-4/
You can scroll down and then download it. I think if you are using Seamonkey you need to Right-Click and choose Save Link As. That should work with any browser. It will be in the next build of uPup Karmic, especially if you report that it solved this problem. SHS's gcc 4.4.1 from the first message in this thread would also work, but it takes much memory (~400MB in all to install the pet).
At what point does the wireless fail to connect to encrypted access points? Have you tried Pwireless? It is under Menu -> Network -> Network applications.
You can scroll down and then download it. I think if you are using Seamonkey you need to Right-Click and choose Save Link As. That should work with any browser. It will be in the next build of uPup Karmic, especially if you report that it solved this problem. SHS's gcc 4.4.1 from the first message in this thread would also work, but it takes much memory (~400MB in all to install the pet).
At what point does the wireless fail to connect to encrypted access points? Have you tried Pwireless? It is under Menu -> Network -> Network applications.
CUPS Problem
I like the look of Upup. When I tried to connect my remote printer (HDPhotosmart 4600 series with an XP server), I get the message, "internal server error." Is this a Upup problem, a CUPS problem, or some sort of deep psychological problem of mine?
Sorry I have already installed shs's pet (and upup devx). So I guess to try your pet I have to remove them, and is a full install...playdayz wrote:hey mavrothal, The mktemp.pet is in this repo http://distro.ibiblio.org/pub/linux/dis ... ackages-4/
You can scroll down and then download it. I think if you are using Seamonkey you need to Right-Click and choose Save Link As. That should work with any browser. It will be in the next build of uPup Karmic, especially if you report that it solved this problem. SHS's gcc 4.4.1 from the first message in this thread would also work, but it takes much memory (~400MB in all to install the pet).
Anyway, mktemp is fine and alsaconf runs but can not find the card at all.
The wireless connects to encrypted APs but dhcp fails to get a valid address.At what point does the wireless fail to connect to encrypted access points? Have you tried Pwireless? It is under Menu -> Network -> Network applications.
Pwirless does not work at all! the scan does not detect any access points though it sees the interfaces. I do not know if the fact that the XO-1 has wireless in eth0 "confuses" the Pwireless.
No worries mavrothal. That would be a mess. I have had great luck with SHS's gcc. There are a number of people working on XOpup who might have ideas. Oh, I see you started the XOpup Interest GroupSorry I have already installed shs's pet (and upup devx). So I guess to try your pet I have to remove them, and is a full install...
mktemp willl be included in the next Upup in a day or two. You can test the live-CD I guess so you don't have to install and reinstall. I know ttuuxxx thought a uPup might be a good choice as a base for the XOpup, am I right? I am thinking that is a good modest goal for me, not to try anything fancy but just get the basics ironed out as much as possible.@davec51. ecube reported that (re)installing the cups pet made the difference. It is there, but something must be getting damaged. You can find it here.
http://ibiblio.org/pub/linux/distributi ... ages-woof/
ecube said this on a message on page 2 of this thread.
Trying to setup CUPS printing failed due to "500 Internal Server Error". But installing the cups-1.3.10-1-uj pet made installation of my Okipage 14ex printer possible.
playdayz,
Just installed your latest upup452. I'm glad to see that you are continuing with it and will definitely try it out.
It's looking good, and runs well on my system with only a few problems:
1. nvidia driver entry had to be edited to read "nv" before xorg would work with my video card.
2. Printer Setup will not work. the Cups Printer Manager opens the CUPS 1.4.1 screen, however when Printers Menu is selected it states "500 Internal Server Error".
FWIW, I've installed the following software pets:
1. Firefox-3.5.5-Flash10-SimpeMail-wysiwyg.pet (works fine)
2. gnome-games-Lite_2.26.1-i486-uj.pet (works fine)
3. bibletime-2.4.1-i686-dpup.pet (works after installing missing libaudio.so.2, except no menu icons are showing, however it is designed for dpup which also has the menu icons missing)
Thanks,
Jim
Just installed your latest upup452. I'm glad to see that you are continuing with it and will definitely try it out.
It's looking good, and runs well on my system with only a few problems:
1. nvidia driver entry had to be edited to read "nv" before xorg would work with my video card.
2. Printer Setup will not work. the Cups Printer Manager opens the CUPS 1.4.1 screen, however when Printers Menu is selected it states "500 Internal Server Error".
FWIW, I've installed the following software pets:
1. Firefox-3.5.5-Flash10-SimpeMail-wysiwyg.pet (works fine)
2. gnome-games-Lite_2.26.1-i486-uj.pet (works fine)
3. bibletime-2.4.1-i686-dpup.pet (works after installing missing libaudio.so.2, except no menu icons are showing, however it is designed for dpup which also has the menu icons missing)
Thanks,
Jim
-
invisible man
- Posts: 21
- Joined: Wed 12 Aug 2009, 16:30
Glitches?
Alternately the last 2 releases; gave trouble on a full install. Had to jockey to Xvesa, and back to Xorg after reboot and saving 2fs file, for screen to work .A 1024 x 16 screen choice that is recognized by previous Puppy installs; (though my netbook screen is only 10 inch.) Wizard setup for cdrom/dvd, gives only a page of x dialog; no choices, displayed. I am using an HP110NR, netbook, and an external LG optical drive. Inserted Broadcom Pet cd --not shown on desktop, haven't a found way to mount cd drive. Currently writing from D-Pup 484, on seperate partition. Invisible Man
Hi playdayz
Your upup 453 with a fresh install runs well on my system with only a few problems that were also on 452. It also updated a upup452 pup_save without problems as well as creating a new pup_save.
1. nvidia driver entry had to be edited to read "nv" before xorg would work with my video card.
2. Printer Setup will not work. the Cups Printer Manager opens the CUPS 1.4.1 screen, however when Printers Menu is selected it states "500 Internal Server Error".
Cheers,
Jim
Your upup 453 with a fresh install runs well on my system with only a few problems that were also on 452. It also updated a upup452 pup_save without problems as well as creating a new pup_save.
1. nvidia driver entry had to be edited to read "nv" before xorg would work with my video card.
2. Printer Setup will not work. the Cups Printer Manager opens the CUPS 1.4.1 screen, however when Printers Menu is selected it states "500 Internal Server Error".
Sorry, installing the pet above does not help, browser opens with a blank screen. Other suggestions?5) Cups. Does it work? If it does not, then does it help to download and install this cups pet ->
http://ibiblio.org/pub/linux/distributi ... 0-1-uj.pet
Cheers,
Jim