Inkscape 0.47 (latest)

Message

Dingo · #1 Post by **Dingo** » Tue 12 Jan 2010, 17:17

Woof Woof!!

Ladies and puppies, Inkscape 0.47 for puppy linux is available!!
in order to reduce size of package I stripped all unnecessary things like: extra-locals and tutorials (you can download separately)

Tested on Puppy 4.3.1 (I think may work also on 4.2.x series)

*Inkscape 0.47*
- pet package
- mirror 25 Mb, 75 once installed
md5sum ee0612f23c4e06b52ca3d5babd52184f inkscape-0.47.pet.zip
*pet package compressed with upx* (it saves about 12 MB) 24 MB, 63 once installed
- download
md5sum b8825927ffb1084cfc5c7b23909a330b inkscape-0.47.pet.zip

- sfs packages 20 MB
- sfs3 version, for puppy with kernel older than 2.6.29.x download - mirror
ae9c8a1209e432183550e5a4fea809c7 inkscape-0.47-sfs3.sfs.zip
- sfs4 version, for puppy with kernel 2.6.29.x or newer download - mirror
md5sum 7911c03d456a07decb44d846ea5ba565 inkscape-0.47-sfs4.sfs.zip

for newbies: in order to check kernel in use, type: uname -a in console

- tutorials (stripped to make smaller package)
- download - mirror

- locals
- download locales - mirror
md5sum a613c72fcb6c72990aa866e3dca69582 locales-for-inkscape.pet.zip

- Inkscape for puppy linux, comes with only language support for english, if you are non english user and want have inscape in your language, download locales package and install

more Inkscape builds at this page
http://puppylover.netsons.org/dokupuppy ... ms:drawing

BobSongs · #2 Post by **BobSongs** » Tue 12 Jan 2010, 20:53

Dingo!! Dingo!!

From Canada, across the world: Thank you, Thank you!

The InkLite package that comes with Puppy is ... well, let's just say that I'm very thankful. Mom told me: "If you can't say anything nice, don't say anything at all." Red Green said: "If your wife doesn't find you handsome, she should at least find you handy."

Seriously: thank you. This makes a huuuge difference to me.

DMcCunney · #3 Post by **DMcCunney** » Wed 13 Jan 2010, 03:22

Dingo wrote:Woof Woof!!

Ladies and puppies, Inkscape 0.47 for puppy linux is available!!

Bless you, Dingo!
______
Dennis

zigbert · #4 Post by **zigbert** » Wed 13 Jan 2010, 07:28

Thanks a lot!

Sigmund

linux28 · #5 Post by **linux28** » Wed 13 Jan 2010, 13:02

There is no other download address?

abushcrafter · #6 Post by **abushcrafter** » Wed 13 Jan 2010, 15:32

pet works but sfs fails.

yes I used the sfs4 for my 431 puppy!

thanks thought.

pri · #7 Post by **pri** » Wed 13 Jan 2010, 15:46

dingo.. for my country and other, i think zidu is bad for low conection. can you post it on other public folder like 4shared ? i always got error downloading from zidu

Dingo · #8 Post by **Dingo** » Wed 13 Jan 2010, 16:50

abushcrafter wrote:pet works but sfs fails.

yes I used the sfs4 for my 431 puppy!

added mirrors if you have problems with ziddu in your country

regarding sfs4 package, have you already checked md5sum?
have you tried to load with sfslinker?
at boot, is sfs4 package recognized?
have you added _431 (better -431) to sfs filename (like inkscape-sfs4-431.sfs)?

#9 Post by **ttuuxxx** » Wed 13 Jan 2010, 18:02

Hi dingo, When Barry compiles Inkscape his package is usually under 2mb, how he does it is simple, you need to compile your mm deps as statically, it should reduce the size drastically.

Hmmm I have his notes how he compiled Gparted, which is very close to being the same sort of compile, its static mm libs which kills the size.
Here's how he does it.

A problem that has prevented me from upgrading is that Gparted requires the gtkmm libraries, which are huge. This has prevented me from using the Gparted packages that come with the compatible-distros.

Furthermore, the gtkmm libraries packages provided with the compatible distros do not include '.a' static library files. So, to compile Gparted with static gtkmm libraries and hence get a reasonably small package, I have to go through the whole exercise of compiling them. I have done this in Jaunty pup. Here is how:

cairomm-1.8.0

# ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --disable-docs --enable-static --disable-shared

glibmm-2.20.0

# ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --disable-fulldocs --enable-static --disable-shared

pangomm-2.24

# ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --disable-docs --enable-static --disable-shared

gtkmm-2.16.0

# ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --disable-docs --enable-static --disable-shared --disable-demos

libuuid

missing, needed! this is part of 'e2fsprogs' but ubuntu doesn't seem to have the 'dev' component (include files, uuid.pc, libuuid.so).

...I had compiled binary in T2, grabbed dev components from there.

gparted-0.4.4

# ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --disable-doc --disable-scrollkeeper

# make

# new2dir make install

ttuuxxx

linux28 · #10 Post by **linux28** » Fri 15 Jan 2010, 01:01

Hello!
Issued by the network disk, I can not download it here,

Inkscape 0.47. pet

You Moren help upload it to another download address ah?
ftp://ibiblio.org/pub/linux/distributions/puppylinux/
And
http://www.filebox.com
Here I can download that the connection is not on the other.

abushcrafter · #11 Post by **abushcrafter** » Sat 16 Jan 2010, 12:45

The I deleted the zip of the sfs so I cant check the md5sum

but I made a sfs from the pet and that had the same error.

The error was: the aspell libs where none exsistent when the sfs is loaded into the file system but they are in the sfs!

Pets have built in md5sums. So I don't need the check them!

Dingo · #12 Post by **Dingo** » Sat 16 Jan 2010, 13:06

since you have tried build sfs yourself you must try my original sfs then report eventually complains so I can fix if it is needed

abushcrafter · #13 Post by **abushcrafter** » Sat 16 Jan 2010, 13:09

I did, same error though.

Dingo · #14 Post by **Dingo** » Sat 16 Jan 2010, 13:37

abushcrafter wrote:I did, same error though.

rigth! I'm working on; have you tried to load sfs at boot or using jrb sfsf linker?

abushcrafter · #15 Post by **abushcrafter** » Sat 16 Jan 2010, 13:46

boot. Thanks for your help

.

Dingo · #16 Post by **Dingo** » Sat 16 Jan 2010, 17:31

news! (see firs post)

I added a new .pet version compressed with upx saving 12 of space (package is 24 MB, 63 once installed, instead of 75)

I tested also sfs packages with latest jrb sfs linker and are working fine without problems

so, abushcrafter, please to specify what version of puppy are using (type also uname -a in console for kernel)

abushcrafter · #17 Post by **abushcrafter** » Sat 16 Jan 2010, 19:35

Code: Select all

Linux puppypc 2.6.30.5 #1 SMP Tue Sep 1 15:48:26 GMT-8 2009 i686 GNU/Linux

Dingo · #18 Post by **Dingo** » Sat 16 Jan 2010, 19:41

I guess you are using not regular Puppy series, but a pupplet (what pupplet? (name), I tested on Puppy 4.3.1 and sfs package is fully working, o, in addition to kernle you must add the name of pupplet you are using

abushcrafter · #19 Post by **abushcrafter** » Sat 16 Jan 2010, 20:13

Powered Puppy!

Its just the normal puppy 431 heavy customized. So that's loads of apps which are configured. I plan to upload it as a pupplet when I have finished.

I will check that I did test your sfs because I am not so shore now that I did

.

abushcrafter · #20 Post by **abushcrafter** » Sat 16 Jan 2010, 20:39

Can you post the sfs's md5sum not the zip's one though please?

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum