Can't boot from USB install
-
- Posts: 4
- Joined: Wed 22 Jun 2005, 23:49
Can't boot from USB install
I just installed 1.0.3 and when it tries to boot from my USB stick all I get is a semicolon in the upper-left hand corner. Any thoughts? The install seemed to go rather well from the live cd...
-
- Posts: 4
- Joined: Wed 22 Jun 2005, 23:49
- papaschtroumpf
- Posts: 250
- Joined: Fri 17 Jun 2005, 04:23
I found it, (in the sticky index post in the Beginners forum):papaschtroumpf wrote:using a newer syslinux worked for me, you might want to give it a try.
Do a search on the forum ofr how to do it
http://www.murga.org/~puppy/viewtopic.php?p=1243#1243
- papaschtroumpf
- Posts: 250
- Joined: Fri 17 Jun 2005, 04:23
-
- Posts: 4
- Joined: Wed 22 Jun 2005, 23:49
Re: Can't boot from USB install
We have an HP ZE2113US laptop computer on which Puppy 1.0.4 Office (Chubby) is installed on the hard drive. However, we also tried to install Puppy on a 1 GB Kingston Data flash drive for demo purposes & while the install went well, we get the following repeating message when we try to boot the flash drive:
For Realtek PCI Fast Ethernet Controller v2.13
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE ROM.
We don't have an ethernet connection at home. Do we need an ethernet cable connection for this to work? Is this a known bug? Should we reinstall? What is the solution?
For Realtek PCI Fast Ethernet Controller v2.13
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE ROM.
We don't have an ethernet connection at home. Do we need an ethernet cable connection for this to work? Is this a known bug? Should we reinstall? What is the solution?
Re: Can't boot from USB install
We tried installing Puppy 1.0.5 Alpha to the USB flash drive but still could not get it to boot. Then we tried installing DSL 1.5 to the USB flash drive and it would boot. The difference in DSL 1.5 is that there is a choice between installing as USB Zip or USB HDD. That may be the difference because although we have state-of-the-art computers, none of them have a USB Zip option in the BIOS. We would suggest looking at DSL 1.5 & doing something similar in Puppy 1.0.5 before the final release so it can boot a USB HDD flash drive.
Also on this HP ZE2113US laptop we can only dialup thru the internal modem or a USB modem. Puppy needs to be able to at least run the USB modem if not the HP internal modem. Currently there is not a USB option in modem setup.
Also on this HP ZE2113US laptop we can only dialup thru the internal modem or a USB modem. Puppy needs to be able to at least run the USB modem if not the HP internal modem. Currently there is not a USB option in modem setup.