Official 4.3.2

News, happenings
Post Reply
Message
Author
User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

Re: CUPS and XVESA

#101 Post by ttuuxxx »

tlchost wrote:Created bootable USB with V2

no selections available for xvesa video
CUPS gives server-error-internal-error when adding printer
same error after installing printer fix pet

Thom
hi Thom cups should work fine now, just run it from the menu and only select the first button like below.
If your gui doesn't look like the image below then it wasn't installed properly.
ttuuxxx
Attachments
cups.jpg
(47.7 KiB) Downloaded 1044 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

Re: Official 4.3.2

#102 Post by ttuuxxx »

weird didn't post this here. should of been on page 1
ttuuxxx
Last edited by ttuuxxx on Sat 03 Apr 2010, 19:25, edited 1 time in total.
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#103 Post by 01micko »

Hi ttuuxxx

Sorry if all this has been covered but did you grab all ziggy's bugfixes for 431 from Stardust? Some will be irrelevant due to the seamonkey 2 upgrade.

Cheers
Attachments
431-bugfixes.jpg
(40.73 KiB) Downloaded 1030 times
Puppy Linux Blog - contact me for access

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

Re: CUPS and XVESA

#104 Post by tlchost »

ttuuxxx wrote: hi Thom cups should work fine now, just run it from the menu and only select the first button like below.
If your gui doesn't look like the image below then it wasn't installed properly.
ttuuxxx
Well...I redid everything from scratch, started with a naked V2, redownloaded the fix and installed it...still have the same problem.

I hope V3 works...for me V2 is unworkable.

Thom

stu90

#105 Post by stu90 »

Good work ttuuxxx -i don't know what goes on under the hood but the new browser and blinky are very welcomed updates to me.

Running fresh 4.3.2-v2 frugal install:
On each bootup/reboot i keep getting an updating files message, (seems to be cups related)
followed by
updating from 431 to 432 message with a 30 second boot delay.
In total adds about a minute to the boot time, maybe my grub files is wrong?

# Linux bootable partition config begins
title pup432-v2
rootnoverify (hd0,0)
kernel /pup432-v2/vmlinuz pmedia=atahd psubdir=pup432-v2
initrd /pup432-v2/initrd.gz
# Linux bootable partition config ends


Since this is a new official puppy here is my desktop 8)
Image

User avatar
wuwei
Posts: 800
Joined: Sat 15 Sep 2007, 11:59
Location: formerly de; now in tranquility

#106 Post by wuwei »

stu90 wrote:
Running fresh 4.3.2-v2 frugal install:
On each bootup/reboot i keep getting an updating files message, (seems to be cups related)
followed by
updating from 431 to 432 message with a 30 second boot delay.
I confirm this. Also Seamonkey replaces Firefox as the defaultbrowser again. And /tmp/versionupgrade does not exist, despite the boot message referring to it.

Hopefully a minor bug.

Happy Easter to y'all.

User avatar
abushcrafter
Posts: 1418
Joined: Fri 30 Oct 2009, 16:57
Location: England
Contact:

#107 Post by abushcrafter »

ttuuxxx wrote:
abushcrafter wrote:You can get rid of gfnrename as it can't cope with spaces when I tried to do a search and replace batch rename. Can you also replace all those Calculators with galculator if you have not all ready? I am also making a large 7z of updates I have for you :) and may be a possible extras 7z :D.
Whats your updates consist of? I'm not replacing anything that could cripple the system, This is just a quick bug fix release :) could your updates be tar.gz or tar.bz2 4 series doesn't have 7z or xarchiver, just xarchive.
hmmm I need to focus mostly on the bugs and get this release finalized.
ttuuxxx
Ok, bz2 it is. The updates are for apps like asunder, wget, gparted ,aqualung, etc and a few libs.

User avatar
8-bit
Posts: 3406
Joined: Wed 04 Apr 2007, 03:37
Location: Oregon

#108 Post by 8-bit »

As with stu90 and abushcrafter, I also get Puppy thinking I am upgrading and saying it is restoring original files.
And they seem to be related to cups.

User avatar
abushcrafter
Posts: 1418
Joined: Fri 30 Oct 2009, 16:57
Location: England
Contact:

#109 Post by abushcrafter »

8-bit wrote:As with stu90 and abushcrafter, I also get Puppy thinking I am upgrading and saying it is restoring original files.
And they seem to be related to cups.
Sorry I am :?.

User avatar
abushcrafter
Posts: 1418
Joined: Fri 30 Oct 2009, 16:57
Location: England
Contact:

#110 Post by abushcrafter »

You have 14 days to press the red button to download my updates :lol:.

Image

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

#111 Post by tlchost »

abushcrafter wrote:You have 14 days to press the red button to download my updates]
Is there a url that details what they are?

Thanks

User avatar
abushcrafter
Posts: 1418
Joined: Fri 30 Oct 2009, 16:57
Location: England
Contact:

#112 Post by abushcrafter »

Click the image of a emergency stop button :wink: :wink:.

FlyingRedGoat
Posts: 47
Joined: Tue 24 Mar 2009, 11:41

#113 Post by FlyingRedGoat »

sinc wrote:
FlyingRedGoat wrote: It's still doing everything but cutting the power.
This may not be an overall solution but JamesC mentioned this earlier. Just add acpi=force to your kernel line in grub and your computer should poweroff with no issue.
Now, That worked. :D

Thanx Sinc and JamesC. (Sorry I did see it earlier :oops: )

K
[quote="Lobster"][quote]Read this: Fear Not Root, and tell us what you think.[/quote]

I thought reading this was preferable to running around like a headless penguin
exclaiming, 'Beware the root'. :roll:
[/quote]

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

#114 Post by ttuuxxx »

abushcrafter wrote:You have 14 days to press the red button to download my updates :lol:.

Image
Thanks abushcrafter I'll use what I can, Can't use things like your printer drivers, they are 1.6MB each per printer. So I'll use what I can. thanks again
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

User avatar
abushcrafter
Posts: 1418
Joined: Fri 30 Oct 2009, 16:57
Location: England
Contact:

#115 Post by abushcrafter »

ttuuxxx wrote:
abushcrafter wrote:You have 14 days to press the red button to download my updates :lol:.

Image
Thanks abushcrafter I'll use what I can, Can't use things like your printer drivers, they are 1.6MB each per printer. So I'll use what I can. thanks again
ttuuxxx
oh yes them, I have not used them I included them for the heck of it. I think there might be a update for axel btw.

User avatar
ecube
Posts: 88
Joined: Fri 11 Jul 2008, 17:00
Location: Västerås, Sweden

kmap-1.14.1 keymaps

#116 Post by ecube »

ttuuxxx,
There is a peculiar problem with the keymaps of 4.3.1. For keymaps using latin 1 encoding (de,dk,fi,fr,no,se, etc) non-ascii characters are not shown correctly in all circumstances. In Swedish "å" is such a character. The problem is related to the fact that there are two places where the keyboard is defined. The choice of keymap at the initial boot (console keyboard layout) and the xorg kbd keyboard driver. The problem is tricky to reproduce and people using us-keyboard will never encounter it.

However, in Woof Barry has most likely solved the problem.

http://bkhome.org/blog/?viewDetailed=01218

Replacing /usr/share/kdb with /lib/keymaps has an additional advantage. If a user needs a keymap which isn't offered at initial boot, she can install the complete set of kmap-1.14.1 keymaps using the enclosed pet. This remedy also works in puppies derived from Woof.

Suggestion

Use the woof versions of Keyboard Wizard and rc.country.
The pertinent changes in rc.country is
#091122 merge kmap mods from ecube, maps now in /lib/keymaps, /lib/consolefonts.
#100127 added sv.

Replace the /lib/keymaps and /lib/consolefonts with the woof versions and discard the /usr/share/kbd directory

If you decide to make the changes, please check that you can choose from the complete set of keymaps using "Change the mouse and keyboard"

Off topic
You are are one of the key developers needed for Puppy to win the agility trial. I do hope you are going to continue making Puppy Best in Show.

ecube
Attachments
keymaps-1.14.1.pet
Complete set of kmap-1.14.1 keymaps
(3.65 KiB) Downloaded 384 times

User avatar
Ray MK
Posts: 774
Joined: Tue 05 Feb 2008, 09:10
Location: UK

#117 Post by Ray MK »

hi ttuuxxx,

could you include acpid-1.0.10-1.pet referred to here

http://www.murga-linux.com/puppy/viewtopic.php?t=38173
(Patriot and shinobar)

it provides soft shut down and suspend mostly for laptops
(Works well in both Quirky013 and StarDust013)

but if you called the suspend.sh from your desktop pc, it probably works as well

many thanks

As always - very best regards - Ray

User avatar
8-bit
Posts: 3406
Joined: Wed 04 Apr 2007, 03:37
Location: Oregon

#118 Post by 8-bit »

For a fix to Puppy 432 thinking it is upgrading from 431 when you boot,
I found that you did change the file /etc/puppyversion to show 432, but /etc/DISTRO_SPECS still showed 431.
As a test, I changed it to show 432 and was able to boot without it thinking I was upgrading from 431.

But Puppy wrote over the DISTRO_SPECS file and it again showed 431.
So It needs to be changed in the SFS file to make it permanent.

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

#119 Post by ttuuxxx »

8-bit wrote:For a fix to Puppy 432 thinking it is upgrading from 431 when you boot,
I found that you did change the file /etc/puppyversion to show 432, but /etc/DISTRO_SPECS still showed 431.
As a test, I changed it to show 432 and was able to boot without it thinking I was upgrading from 431.

But Puppy wrote over the DISTRO_SPECS file and it again showed 431.
So It needs to be changed in the SFS file to make it permanent.
yes that was one of the first changes for v3, should be out either today or tomorrow.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

User avatar
sasaqqdan
Posts: 39
Joined: Fri 06 Jun 2008, 13:56
Location: China,Zhejiang,Hangzhou
Contact:

#120 Post by sasaqqdan »

gjuhasz wrote:
After started from live CD, I made some minor cosmetics on the desktop (Changed Icon set, background and set network connection). Then rebooted to create pupsave.2fs file.
Boots well, including the lovely 'next boot will be faster' text. I see my changes, works fine.
However, if I reboot again, a strange "Version update restoring 'official' files, please wait... " message appears. It seems that the original 431 version, or at least some portions of it, will be restored.
Add this script to /etc/rc.d/rc.local:

Code: Select all

cp /initrd/DISTRO_SPECS /etc/DISTRO_SPECS
:)
Attachments
puppy-432v2-cn001.jpg
(133.83 KiB) Downloaded 438 times

Post Reply