Quirky 021 feedback

[BarryK]

I don't want to overload you guys with Quirkies to test! But, here is one just for those with Nvidia hardware, live-CD with Nvidia driver included:

http://bkhome.org/blog/?viewDetailed=01549

[Billtoo]

[quote="BarryK"]I don't want to overload you guys with Quirkies to test! But, here is one just for those with Nvidia hardware,

Downloaded 022,burned disk,and booted with pfix=ram.

Tried probe and chose proper resolution but got mouse pointer on a black screen.
CTL-ALT-BACK to get to the prompt and ran xorgwizard again.This time I tried choose and chose nvidia,it worked.

# report-video
VIDEO REPORT: Quirky, version 022

Chip description:
07:02.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)

Driver used by Xorg:
nvidia

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video
#

[nooby]

Testing your q22 now. Behave like q21

no jerky or choppy or delay. Omelette takes 5 sec.

I guess I want the GL so I stick with q21. I have ditched Q13 now in favor of Q21

# report-video
VIDEO REPORT: Quirky, version 022

Chip description:
oem: NVIDIA
product: G98 Board - 5610001u Chip Rev

Driver used by Xorg:
nvidia

Video mode used by Xorg:
Resolution: Depth 16 Depth: "Display"

#

I got radio going now. Nolt sure why if failed when I posted it. Maybe the server was overloaded at the local radio station but norway failed too.

[mavrothal]

The geode 2.11.7 of the build has the "no desktop icons bug".
The newer 2.11.8 version solves this issue.
Lucid puppy has it and works fine.
Pls include in an upcoming quirky version if you can.

[Jim1911]

I don't want to overload you guys with Quirkies to test! But, here is one just for those with Nvidia hardware, live-CD with Nvidia driver included:

Ran 3 different tests in ram.
1. Used "Probe", the "nv" driver was installed and worked fine.
2. Used "Choose", chose the "nvidia" driver which was installed and ran fine.
3. Installed the nvidia-195.36.15 pet which appeared to install and reported a correct installation, however "report-video" in a console indicates that the "nvidia" driver is installed. No menu item for the NVIDIA X-server settings was installed either.

I mistakenly reported using gray's nvidia-195, however it is 185.18.36. The attached LH desktop picture shows the GUI for the NVIDIA X-server settings that gray's pet installs.

[broomdodger]

""-----=-------=-------=-------=-------=-------=-------=-------=
Dell Inspiron 5150 notebook
Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz
NVIDIA GeForceFX5200

""-----=-------=-------=-------=-------=-------=-------=-------=
quirky021 frugal

<probe>
VIDEO REPORT: Quirky, version 021

Chip description:
oem: NVIDIA
product: NV34 Board - p135nz Chip Rev

Driver used by Xorg:
nv

Video mode used by Xorg:
Resolution: 1024x768 Depth: 24

""-----=-------=-------=-------=-------=-------=-------=-------=
quirky022 frugal

<probe>
# report-video
VIDEO REPORT: Quirky, version 022

Chip description:
oem: NVIDIA
product: NV34 Board - p135nz Chip Rev

Driver used by Xorg:
nv

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

""-----=-------=-------=-------=-------=-------=-------=-------=
quirky022 frugal

<choose> nvidia
# report-video
VIDEO REPORT: Quirky, version 022

Chip description:
oem: NVIDIA
product: NV34 Board - p135nz Chip Rev

Driver used by Xorg:
vesa

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

[broomdodger]

quirky021 frugal
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.23) Gecko/20091216 SeaMonkey/1.1.18

+ try to download by clicking on the paper clip or the word "Download"
http://murga-linux.com/puppy/viewtopic. ... &start=232
JustGreg's grub4dos_htm.zip
+ the "Save it to disk" dialog will not go away
+ I can move that dialog to show the underlying save dialog
+ then continue the save

+ using right-click (contextual menu) works no problem

Only seems Gecko has changed between quirky021 and puppy431

puppy431 frugal
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.23) Gecko/20090910 SeaMonkey/1.1.18

No problem with clicking the paper clip or Download.

[broomdodger]

Dell Inspiron 5150 notebook
Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz

quirky021 frugal
PowerOn blinky is in the dock, eth0 is ok
Restart blinky is finicky, sometimes yes, most times no and Connect does not see eth0. PowerOff then PowerOn and eth0 is ok

puppy431 frugal
PowerOn blinky is in the dock, eth0 is ok
Restart blinky is in the dock, eth0 is ok

[broomdodger]

quirky021 frugal

Dell Inspiron 5150 notebook

trackpad defaults are great (no need to configure)
+ two finger scrolling on
+ tap turned off

[alec78]

Hi all,
@BarryK
Barry, there is still something amiss with xorgwizard.
You may not remember but in the Q013 thread I reported that after following your instructions,dated 31/3/10, the X05 would run with the Intel i810 driver.
In the Quirky 018 thread I reported that no matter what I did xorgwizard would revert to the vesa driver.
Again in Quirky 021 xorgwizard reverts to the vesa driver. This time it does remove the intel driver from /usr/X11R7/lib/xorg/modules/drivers and inserts the i810 driver, but it applies the vesa driver.
I tried changing vesa to i810 in xorg.conf, but that did not work. Had to run xorgwizard to get graphics.
Any suggestions?
Cheers

[BarryK]

quirky021 frugal
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.23) Gecko/20091216 SeaMonkey/1.1.18

+ try to download by clicking on the paper clip or the word "Download"
http://murga-linux.com/puppy/viewtopic. ... &start=232
JustGreg's grub4dos_htm.zip
+ the "Save it to disk" dialog will not go away
+ I can move that dialog to show the underlying save dialog
+ then continue the save

+ using right-click (contextual menu) works no problem

Only seems Gecko has changed between quirky021 and puppy431

puppy431 frugal
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.23) Gecko/20090910 SeaMonkey/1.1.18

No problem with clicking the paper clip or Download.

There is a problem with SeaMonkey 1.1.18 and Openbox window manager. Surprising that it has this bug, considering that Openbox is supposed to be a very mature product.

You don't really have to drag the save-as dialog away, just click on the underlying destination-chooser dialog -- notice that it's header is flashing -- must be Openbox's way of letting you know that this dialog should be on top but isn't.

[BarryK]

Hi all,
@BarryK
Barry, there is still something amiss with xorgwizard.
You may not remember but in the Q013 thread I reported that after following your instructions,dated 31/3/10, the X05 would run with the Intel i810 driver.
In the Quirky 018 thread I reported that no matter what I did xorgwizard would revert to the vesa driver.
Again in Quirky 021 xorgwizard reverts to the vesa driver. This time it does remove the intel driver from /usr/X11R7/lib/xorg/modules/drivers and inserts the i810 driver, but it applies the vesa driver.
I tried changing vesa to i810 in xorg.conf, but that did not work. Had to run xorgwizard to get graphics.
Any suggestions?
Cheers

Looks like you will have to manually remove /usr/lib/xorg/modules/drivers/vesa_drv.so.

Hmmm, that might not work. The Xorg probe only chooses vesa as a last resort, so it is thinking that i810 is not suitable. So, I don't know if removing vesa will force it to choose i810.

[JustGreg]

The system is Acer Aspire Revo, about 1 Gigabyte memory and Nvidia Ion video. Quirky 022 first tried the nv driver and failed due to the Ion video not being found. Second try, fresh without a save file, I pick the Nvidia 195.26.15 driver (just nvidia in list). It worked with out a problem. I am posting this using Quirky 022.

I want the nvidia-settings tool. So, I expanded only the nvidia-195.36.15-pkg1.run file. I copy the nvidia-settings file to /root/my-applications/bin and try running it. The tool started and worked. I got this error message:

Code: Select all

ERROR: libGL setup error : libGL.so.1: cannot open shared object file: No such  file or directory

I copied to /root/my-applications/lib the file, libGL.so.195.136.15 and create link libGL.so.195.1 to it.. Ran the nvidia-settings tool again. It worked with this error message:

Code: Select all

ERROR: libGL setup error : libGLcore.so.1: cannot open shared object file: No such file or directory

I copied to /root/my-applications/lib the file, libGL.core.so.195.36.15 and link to it, libGL.core.so.1. Ran the nvidia-settings tool and got this error:

Code: Select all

ERROR: libGL setup error : libnvidia-tls.so.1: cannot open shared object file: No such file or directory

I did the same for the file, libnvidia.tls.so.195.36.15 and linked it to libnvidia.tls.so.1. This time when I tried to run the nvidia-settings tool, it failed to run with a segmentation fault. Eliminating the link, allowed nvidia-settings tool to run with a minor non-fatal error. If you get the segmentation error with the nvidia-settings tool, then look for libnvidia.tls.so.1 file and rename or delete it.

The nvidia-settings tool and the first two libraries require about 25 Megabytes of storage. The nvidia-settings tool by itself requires 1511 Kbytes of storage. I do not know for sure if the two libraries are really needed.

I hope this helps.

[Hesse James]

Hi Barry
Finally many thanks from my side for the 022. It was the first time ever I have seen a Puplet initially starting with 1900x1050x24 on my TV with a fully working Nvidia-driver.
The next will be the installation of some Lirc, Sat and other drivers which seem to be a little bumpy as I have quickly tested that this morning. I will see.
Many thanks again and good luck for the release.

[BarryK]

The system is Acer Aspire Revo, about 1 Gigabyte memory and Nvidia Ion video. Quirky 022 first tried the nv driver and failed due to the Ion video not being found. Second try, fresh without a save file, I pick the Nvidia 195.26.15 driver (just nvidia in list). It worked with out a problem. I am posting this using Quirky 022.

I want the nvidia-settings tool. So, I expanded only the nvidia-195.36.15-pkg1.run file. I copy the nvidia-settings file to /root/my-applications/bin and try running it. The tool started and worked. I got this error message:

Code: Select all

ERROR: libGL setup error : libGL.so.1: cannot open shared object file: No such  file or directory

I copied to /root/my-applications/lib the file, libGL.so.195.136.15 and create link libGL.so.195.1 to it.. Ran the nvidia-settings tool again. It worked with this error message:

Code: Select all

ERROR: libGL setup error : libGLcore.so.1: cannot open shared object file: No such file or directory

I copied to /root/my-applications/lib the file, libGL.core.so.195.36.15 and link to it, libGL.core.so.1. Ran the nvidia-settings tool and got this error:

Code: Select all

ERROR: libGL setup error : libnvidia-tls.so.1: cannot open shared object file: No such file or directory

I did the same for the file, libnvidia.tls.so.195.36.15 and linked it to libnvidia.tls.so.1. This time when I tried to run the nvidia-settings tool, it failed to run with a segmentation fault. Eliminating the link, allowed nvidia-settings tool to run with a minor non-fatal error. If you get the segmentation error with the nvidia-settings tool, then look for libnvidia.tls.so.1 file and rename or delete it.

The nvidia-settings tool and the first two libraries require about 25 Megabytes of storage. The nvidia-settings tool by itself requires 1511 Kbytes of storage. I do not know for sure if the two libraries are really needed.

I hope this helps.

I don't understand what you have done exactly. If you are using Q022, it has the cutdown Nvidia. Ok, to get nvidia-settings and all the extra libraries, you need my full Nvidia PET package.

I have recently improved that package, and uploaded it a few minutes ago. Get it from here:

http://distro.ibiblio.org/pub/linux/dis ... 2-1-q1.pet

...install that, you should get an entry for nvidia-settings in the Setup menu. The settings won't be remembered between boots -- see my recent blog post -- fixed in next Quirky.

[Béèm]

Already reported in quirky 13 and still here in quirky 22 (didn't try quirky 21)

When going with the mouse cursor over the desktop drive icons, the filesystem is in the pop-up box, but not the size.

Kinda annoying.

[Béèm]

Already reported before.

When starting with pfix=ram at the end of the session the panel to create a save file isn't displayed and a message is issued session not saved

The circumvention I found is to do a first boot with pfix=ram and psubdir=
I then get the panel to create a save file
Once a save file created, the psubdir= isn't needed anymore

It's kinda annoying as f.e. Lucid doesn't have this issue, so when installing a new quirky, I forget about this.

[Béèm]

When configuring with SNS the internet connection, at next boot this configuration is lost and has to be done again.
I am not sure, but I think this has been reported earlier.

Supplementary a suggestion.
Sometimes I enter the WEP key and forget to select the WEP radio button.
The only choice I have then is to go back to the initial sceen.
It would be user-friendly if one could go back one step to select that radio button, while retaining the key entered.

[aarf]

q21 has this same linking error as lupu113

[BarryK]

Already reported in quirky 13 and still here in quirky 22 (didn't try quirky 21)

When going with the mouse cursor over the desktop drive icons, the filesystem is in the pop-up box, but not the size.

Kinda annoying.

The size information has always been there for me.

The size information is obtained in script /usr/bin/pup_event_frontend_d:

Code: Select all

    PROBEPART="`probepart -k | grep -E '\|ext4\||\|ntfs\||\|msdos\||\|vfat\||\|ext2\||\|ext3\||\|iso9660\||\|xfs\||\|reiser'`"
    DRVINFO="`echo "$PROBEPART" | grep "$drvPATTERN" | cut -f 1,2,3 -d '|' | tr '\n' ' '`"

The size info is in the 3rd field of DRVINFO.

The information is obtained from this, try it in a terminal:

# probepart -k