ROX 2.10

Filemanagers, partitioning tools, etc.
Post Reply
Message
Author
musher0
Posts: 14629
Joined: Mon 05 Jan 2009, 00:54
Location: Gatineau (Qc), Canada

ROX 2.10

#1 Post by musher0 »

(J'ai mis des explications en français après celles en anglais. / French explanations are below the English ones.)

-0-0-0-
Hi!

Here is the latest version of ROX, v. 2.10
There have been +/- 80 tweeks and updates since ROX 2.6.1, which is still used in (very) recent puppies. So I think this is justified.

Improvements (according to the history of the ROX program) include tighter integration with archivers and MIME-types, etc. As for me, I like that v. 2.10 facilitates use of the rox-panel (actually, from v. 2.8 up).

Made with BK's latest compile (rox-filer-20100408smw-patched.tar.gz), this build is as "puppy-istic" as you can get.

ROX 2.10 is still in "beta"; however it works fully, to my knowledge, in jemimah's Fluppy. I've noticed an iconization bug in mywolfe and wary.
Untried under other puppies; if it works on yours, please let us know ?! :)

How-To:
ROX is an essential component of Puppy, so... it's better to be on the safe side...
1) make a copy of your existing ROX-Filer in your /usr/local/apps sub-directory under a different name, e.g. ROX-Filer-2.6.1, before you install this package.

1a) Better still, if you have a frugal install, make a copy of your entire pupsave file first.

2) Erase the original ROX-Filer directory

3) Install this pet package.

4) Once ROX-2.10 is installed, immediately go the prompt with ctrl-alt-backspace and type xwin. (Alternately, you can restart the X-windows manager from your exit or session panel.)

5) You should now be back in your X-windows environment. To double-check that everything is ok, bring up a console and type

Code: Select all

rox -v 
If the new ROX installed properly, the version number near the top should read : "ROX 2.10"

Enjoy!

-0-0-0-
Bonsoir les amis.

Suite à une suggestion d'Argolance, voici ROX v. 2.10 en français.

À lire le fichier "changes", on note, entre les v. 2.6.1 de ROX et la version 2.10, une vingtaine de changements, sans compter les mises à jour de traductions pour le japonais, l'espagnol, etc.

En résumé, à ce que j'en comprends, ces changements affectent entre autres une facilitation de mount et de (pup)zip, et une meilleure intégration avec les thèmes GTK, plus une commande plus fine des panneaux ROX pour celles et ceux qui en utilisent (comme je l'ai mentionné précédemment).

L'utilisateur ordinaire ne se rendra pas compte, à l'usage, de ces améliorations. Donc vous pouvez passer outre si la v. 2.6.1 vous convient telle quelle. La seule différence notable avec la v. 2.6.1 utilisée par défaut dans le Toutou Terre-Neuve (alias FAT; non, Argolance ne réussira pas à m'angliciser !), c'est que puppy/toutou utilise pour les associations un répertoire OpenWith, plutôt qu'un répertoire SendTo dans la version 2.10. J'ai prévu le coup et, dans mon paquet pet, un lien a été créé du répertoire OpenWith au répertoire SendTo, donc la mise à jour devrait se dérouler de façon transparente pour l'utilsateur final.

Le pet que j'offre ici comprend en outre des signets ROX qui vous permettront d'aller partout dans la hiérarchie des répertoires du Toutou en deux clics. Je n'invente rien ici, la possibilité existe déjà dans ROX, je n'ai fait qu'élaborer. Vous devrez peut-être adapter les liens sous /mnt, qui reflètent les disques que j'ai sur ma machine. Ces signets sont juste à droite de la petite maison dans le menu du ROX-Filer. Il y a un sous-menu facile à comprendre.

Avant de vous précipiter et d'installer ce nouveau pet les yeux fermés, je vous demande, par mesure de sécurité, de sauvegarder / copier sous un autre nom et ailleurs (!) chacun des répertoires suivants :
/usr/local/apps/ROX-Filer (sous, par exemple, /usr/local/apps/ROX-Filer-2.61)
/root/.config/rox-sourceforge.net (sous, par exemple, /root/.config/rox-sourceforge.net-1)
Je dis bien copier et non déplacer, parce que vous aurez besoin du ROX 2.6 pendant l'opération, jusqu'à ce que la v. 2.10 soit installée.

Ensuite, ouvrez un 2e panneau de ROX dans le répertoire où vous avez téléchargé le paquet de ROX 2.10, et de façon à voir le nom du fichier paquet. Désolé pour la complication, mais on met ici à jour un bureau et un gestionnaire de fichiers, éléments essentiels de Toutou. Il faut une bonne préparation (qui n'est pas nécessaire pour les autres paquets pet). Pendant les deux secondes que prendra le nouveau ROX pour s'installer, vous n'aurez pas de bureau sur disque ni en mémoire.

Une fois que vous avez fait vos sauvegardes, allez dans /usr/local/apps/ROX-Filer et effacez tout, les fichiers et les répertoires, sauf le lien .DirIcon (qui mène à une icône propre à Toutou-4.31 FAT).

Tout de suite après, cliquez sur le fichier ROX-Filer-2.10-fr.pet qui est dans l'autre panneau du gestionnaire que vous avez ouvert. Quand le gestionnaire de paquets vous annonce que c'est fini, voilà, vous avez mis à jour ROX à la version 2.10.

Pour vérifier, ouvrez une console et tapez : rox -v. La version de ROX 2.10 devrait normalement être indiquée tout en haut.

Mon paquet pet est très cachère pour Puppy. Il vient de
ROX-Filer 20100408smw-patched http://bkhome.org/blog/?viewDetailed=01570
que BK a préparé en date du 9 mai dernier.

Je l'ai testé dans MyWolfe 0.08 et avec le Toutou Terre-Neuve [alias "FAT" !]. Cette version de ROX fonctionne au complet sous le Fluppy de jemimah, mais l'iconisation présente un bogue sous mywolfe, wary et Toutou 4.3.1 FAT.

Pour revenir à l'installation, si, ayant fait des sauvegardes, la v. 2.10 ne fonctionne pas chez vous, vous pourrez facilement rétablir l'état d'avant son 'installation. (Tenez, faites donc une copie de tout votre pupsave [le sfs d'installation frugale] pour que votre Toutou soit bien protégé.)

J'allais oublier... Quand vous êtes sûr que la mise à jour a réussi, vous pouvez effacer les répertoires de sauvegarde que vous avez créés. Votre décompte de mémoire Puppy reviendra, à quelques Ko près, à ce que vous aviez avant de procéder à la mise à jour.

Donnez-m'en des nouvelles ? Je vous souhaite bonne computation !

Cordialement,
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)

User avatar
Eyes-Only
Posts: 1043
Joined: Thu 10 Aug 2006, 06:32
Location: La Confederation Abenaquaise

#2 Post by Eyes-Only »

Salut Musher, Notre Bon Ami Puppien!! ;)

I'm really surprised that nobody has written to give you ANY feedback whatsoever on this - especially after you've taken of your good time and effort to have updated one of the MAJOR Puppy programmes for us! Hmmm... c'est vraiment etonne je t'assure!

I was perhaps one of the very first to have downloaded your ROX-Filer, and I have placed it everywhere, in my KDpup, my Puppy-4.2.1, my Quirky-1.2, and here in my Luci-205, and I'm pleased to report to you that it has worked flawlessly! :D

Perhaps it is a "beta" version yet one would never know of this fact! Thumbs up mon ami.

Thank you for your efforts Musher! Merci mille fois Musher car pour moi - j'apprecie-ca si beaucoup mon vieux ami Puppien! ;)

Amicalement!/Cheers!

Eyes-Only
"L'Peau-Rouge d'Acadie"
*~*~*~*~*~*
Proud user of LXpup and 3-Headed Dog. 8)
*~*~*~*~*~*

musher0
Posts: 14629
Joined: Mon 05 Jan 2009, 00:54
Location: Gatineau (Qc), Canada

#3 Post by musher0 »

Mille mercis pour ton message / A thousand thanks for your message, Eyes-Only!

Maybe it will pick up: I see the dowload count has gone up to 45!? As for me, I'm not after compliments, I'm happy if I can be of service to people.

I'm happy to hear that this package is working on other Puppies as well. / Je suis content d'apprendre que cette version de ROX fonctionne aussi sous d'autres Puppys.

Vive ROX ! Vive Puppy ! Et une très bonne journée à toi ! :D
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)

User avatar
chrome307
Posts: 708
Joined: Thu 15 Jan 2009, 11:00

#4 Post by chrome307 »

Hi there

Thanks for the update :)

I have tried this on Browserlinux 3.54 and it worked for me

Image

One thing I would have like to have changed is the labelling ie

In the menu - FILESYSTEM - GESTIONNAIRE DE FICHERS ( instead of File Manager )

BTW To open your Rox pet, I used Firefox ( browser ) to do this in step 3 as I was unable to open up the directories .... unless you know of an easier way?

musher0
Posts: 14629
Joined: Mon 05 Jan 2009, 00:54
Location: Gatineau (Qc), Canada

#5 Post by musher0 »

Hello, chrome307.

Thanks for the feedback! :)

As to the menu entry, here's one that will display in English in the menu. (Sorry about the oversight.) Just drop this one in the /usr/share/applications. directory. It will overwrite the French one. I'll look into the way to use localisations in .desktop files, but for now this should do nicely.

To get it to appear:
- open a console and type "fixmenus &" (without the quotes). It will take a few seconds.
- open the jwm Menu, go to Session, and then to "Restart jwm". The screen will flicker, after which the new entry should be there, in place of the old one.

As to a .pet file being opened by Firefox, it will do that if you don't choose to download and save in a certain directory (as a separate move) and then install by clicking on the .pet file. In most puppies, the user can use pupzip through the browser (Firefox or Opera) to install .pet files sort of automatically. It's nothing to worry about, it's a nice feature actually, since the pet file gets installed anyway. The only drawback is that this process doesn't keep a copy of your downloaded .pet file in your downloads directory.

I have been overly cautious on purpose in my explanations, since ROX is a major component of the Puppy desktop. I wanted people to have the old version of ROX to fall back on if something went wrong. But it seems everything is going ok! :)

Have a good one! BFN.
Attachments
ROX-Filer-file-manager.desktop.zip
ROX-2.10 .desktop file in English. Unzip and copy at /usr/share/applications as a drop-in replacement if you need it.
(334 Bytes) Downloaded 911 times
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)

User avatar
chrome307
Posts: 708
Joined: Thu 15 Jan 2009, 11:00

#6 Post by chrome307 »

Merci Beaucoup

The desktop icon worked perfectly!!

Sorry I made a mistake in describing the problem I had initially.

So to recap, I carried out the steps you outlined:

Code: Select all

1) make a copy of your existing ROX-Filer in your /usr/local/apps sub-directory under a different name, e.g. ROX-Filer-2.6.1, before you install this package.

1a) Better still, if you have a frugal install, make a copy of your entire pupsave file first.

2) Erase the original ROX-Filer directory

3) Install this pet package. 

At this point I should have done this:

Code: Select all


4) Once ROX-2.10 is installed, immediately  go the prompt with ctrl-alt-backspace and type xwin. (Alternately, you can restart the X-windows manager from your exit or session panel.) 

However I was unable to carry this out, so I open up my browser Firefox and choose 'Open File' and navigate to ' usr/share/applications/Rxvt-terminal-emulator.desktop' to continue.

I can only assume that this is because I have using a 'stripped down' version of Puppy Linux 4.31.

Apart from that minor hiccup it works great - thanks again for the update!! :)

musher0
Posts: 14629
Joined: Mon 05 Jan 2009, 00:54
Location: Gatineau (Qc), Canada

#7 Post by musher0 »

@chrome307
Thanks for the clarification. I didn't know you could do that!

For the rest: you're welcome! :)
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)

musher0
Posts: 14629
Joined: Mon 05 Jan 2009, 00:54
Location: Gatineau (Qc), Canada

#8 Post by musher0 »

@chrome307

The best is to have two Rox panels opened at the same time, one for the directory of your pet downloads, the other for your old ROX at /usr/local/apps/.

That way, your old ROX remains in memory while you're doing the operation, even if you delete it on disk. (My understanding of it) You can then click on the ROX 2.10 pet and it will install.

Maybe my initial description of the steps wasn't clear enough.

Have a nice day!
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)

User avatar
glene77is
Posts: 196
Joined: Tue 17 Aug 2010, 22:09
Location: Memphis, TN, USA
Contact:

ROX-filer

#9 Post by glene77is »

...
Puppy Linux is more fun than a barrel of M$ monkeys :P
www.geocities.WS/glene77is
glene77is --- {^,^} --- electricity is shocking, Memphis, TN, USA.

Post Reply