LupQ-510s FINALIZED - Lucid Puppy Quickset edition

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

QuickSet concept

#61 Post by shinobar »

sinc wrote:you seem to have an independent idea of where you want things to go, have you considered taking over one of the other distribution pups that are not currently being developed. such as dpup which has a great start but gposil has unfortunately not been back for a while. or spup that barry started, etc? just wondering.
Thank you for your offer.
Maybe i do not have enough time to do with another puppies at this point of time.
The reason why i am working on the Lucid Puppy is it is excellent as for the base. Playdayz and the team, including many testers, did great a deal.
But also it is easy on any puppies to bring out the QuickSet concept, i mean the graphical boot menu, drect desktop and new country wizard.
Hope Barry takes QuickSet on the woof.

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Frugal Installer

#62 Post by shinobar »

Even frugal install of puppies are easy to do by hand, Lupq has a GUI named Frugal Installer.
One of the reasons i made this is for bigginers to avoid the Universal Installer, complex and has traps.
The Furugal installer with Grub4DosConfig is easy and safe. You can setup all the things accepting the defaults.

If you like to install lupq on USB drive, still the Frugal installer is my recommendation.
If you find the difficulty with boot up the USB drive on your PC, try the Boot Flash next.

Frugal install on USB drive using the Frugal Installer is almost same as installing on any other drives.
But the Grub4Dos installing, select the target drive and recommended to tik on the 'Search within only this drive'.

Try and enjoy!

Image

User avatar
ecube
Posts: 88
Joined: Fri 11 Jul 2008, 17:00
Location: Västerås, Sweden

Re: Partview and etc.

#63 Post by ecube »

shinobar wrote: network-tray-ecube is a slight different, right?.

I personally do not like Bary's new network tray.
Presently the functions of the network_tray buttons are:
  • Left button:
    When there is no network connection, this runs the 'defaultconnect' script. Otherwise, 'ipinfo' is run.

    Right button:
    Displays a dynamic menu. The choices are:
    "Setup networking"
    "Network status information"
    If there is an active network, then there is also this menu entry:
    "Disconnect from network"
    And having disconnected, there is then this:
    "Reconnect to network"
'ipinfo' of the left button is identical to "Network status information" of the right button.

network_tray-ecube replaces the redundant 'ipinfo' by a splash screen showing "actual ip-address/No IP-address found". (I have found it very useful dealing with unstable wireless connentions to have a simple way of determining if there exists an ip-address or not.) I have tried without success to convince Barry about the wisdom of my suggestion.

http://bkhome.org/blog/?viewDetailed=01690

Maybe it would be better to show the output of the pip script in the mouse pointer splash information.
Attachments
pip.jpg
(1.92 KiB) Downloaded 1829 times
pip.gz
show ip-address
(161 Bytes) Downloaded 573 times

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Re: Partview and etc.

#64 Post by shinobar »

ecube wrote:network_tray-ecube replaces the redundant 'ipinfo' by a splash screen showing "actual ip-address/No IP-address found". (I have found it very useful dealing with unstable wireless connentions to have a simple way of determining if there exists an ip-address or not.)
must be nice.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Winfonts

#65 Post by shinobar »

You may not be familiar with.
Winfonts (lupq-004 and later) is an aid for PC's dual booted with Windows.
It enables Windows fonts and the virtual memory to be also used on Puppy.
Try it if you have lupq dual boot with Windows.
Image
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

a wrapper for the Synaptic touchpad

#66 Post by shinobar »

On Lupu and on LupQ-005 and older, the Synaptics touchpad works from the first desktop, but the flsynclient fails.
I made a wrapper script which can be a solution.
Please try synclient-wrapper-20100901.pet attached, and reply test reports.
It work both on LupQ and on the lupu-510.
Version 20100828 has a typo at the code for Lupu. If you are using LupQ-006 and later, need not install or update.

The reason why the flsynclient fails, i suppose next mechanism:
At the first desktop, the X-server detects the Synaptic touchpad and automatically configure the driver to work.
But the 'SHMConfig' is set 'off' for security reason, whereas synclient requires 'SHMConfig' 'on'.

The main script i made, /usr/bin/synclient.sh, works as the wrapper of synclient.bin, and add proper touchpad entry to xorg.conf.
Last edited by shinobar on Wed 20 Oct 2010, 01:06, edited 6 times in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

calling for translations

#67 Post by shinobar »

some .pot files you can find at /usr/share/doc/nls on lupq.
i recommend poedit to make translations for the gettext system.
http://dokupuppylinux.co.cc/programs:lo ... _utilities
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

Tasgarth
Posts: 203
Joined: Mon 06 Oct 2008, 19:08
Location: France, Besancon
Contact:

usr/share/doc/nls

#68 Post by Tasgarth »

shinobar wrote:
some .pot files you can find at /usr/share/doc/nls on lupq.

usr/share/doc/nls does not exist.(full install)
Or maybe I understood something wrong.
Cheers,
Attachments
shot1-lupq.png
(81.59 KiB) Downloaded 585 times

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Re: /usr/share/doc/nls

#69 Post by shinobar »

Tasgarth wrote:usr/share/doc/nls does not exist.(full install)
/usr/share/doc/nls is on lupq-004. if you are not running lupq-004 live cd nor frugal installed, you can click lupq-004.iso and click lupq-004.sfs.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Flash Player PET

#70 Post by shinobar »

lupq-003 and later does not contain Adobe Flash Player. Install the libflashplayer PET from here.

There is a trap:
If you boot up lupq without pupsave(lupqsave) and install libflashplayer, the main part of the PET is installed at '/mnt/home/libflashplayer'.
The directory '/mnt/home' means the partition your pupsave exists. But if you boot up without, '/mnt/home' is not on the HDD but RAM.
It is no problem as for as you are running on RAM. But when you make the pupsave, the '/mnt/home' on the RAM disappears.
It is not the lupq specific problem. Some PET does such a behaviour with any puppies.

Using these PETs without pupsave is no problem.
But if you will make pupsave, do it first. Install nothing before you create the pupsave.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

ICPUG
Posts: 1308
Joined: Mon 25 Jul 2005, 00:09
Location: UK

#71 Post by ICPUG »

Shinobar

How do you know that SHMConfig is set OFF at first desktop? There aren't any config files when X is working automatically.

What is the security problem with SHMConfig being ON?

Touchpads seem to be a problem with this new XOrg. Some will not get recognised at all. I am trying to understand how Puppy and XOrg detect and configure touchpads in the hope of finding a solution.

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

touchpad

#72 Post by shinobar »

ICPUG wrote:How do you know that SHMConfig is set OFF at first desktop? There aren't any config files when X is working automatically.
What is the security problem with SHMConfig being ON?
I am not sure what is the problem in fact. The SHM is a channel to configure the driver on the fly i understand.
ICPUG wrote:Touchpads seem to be a problem with this new XOrg. Some will not get recognised at all. I am trying to understand how Puppy and XOrg detect and configure touchpads in the hope of finding a solution.
The wrapper i made is an aid only in case the touchpad works on X but the synclient fails.
I don't know how the PC or the linux OS detects the touchpad. You can check up what the OS detected at '/proc/bus/input/devices'.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
upnorth
Posts: 287
Joined: Mon 11 Jan 2010, 19:32
Location: Wisconsin UTC-6 (-5 DST)
Contact:

/etc/profile

#73 Post by upnorth »

Hi Shinobar:
Updated to lupq-006 and everything is running smooth. :)

Only noticed some lines of code in /etc/profile are redundant

57=>69

167=>179 repeats line 57 to 69

Code: Select all

ulimit -c 0
if [ `id -gn` = `id -un` -a `id -u` -gt 14 ]; then
 umask 002
else
 umask 022
fi
USER=`id -un`
PS1="# "
LOGNAME=$USER
HISTSIZE=1000
HISTFILE="$HOME/.history"
EDITOR=mp
INPUTRC=/etc/inputrc
and the logic for dealing with the rox filer focus bug at line 52:

Code: Select all

#100208 rox-filer needs this for GTK >= 2.18, fixes focus problem...
if [ `grep -E '^gtk+-2|libgtk2.0' /root/.packages/woof-installed-packages | head -n 1 | cut -f 3 -d '|' | cut -f 2 -d '.'` -ge 18 ];then
 export GDK_NATIVE_WINDOWS=true
fi
is overridden at line 164
:

Code: Select all

#v4.84 Rox select problem
export GDK_NATIVE_WINDOWS=true

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Re: /etc/profile

#74 Post by shinobar »

upnorth wrote:Only noticed some lines of code in /etc/profile are redundant
57=>69
167=>179 repeats line 57 to 69
Thanks. I did not realized.
The file is from old woof that lucid puppy 5.1 also uses.
I forgot to check out the most resent woof, which is updated some code by Barry.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

new mtpaint available

#75 Post by don570 »

There's a new version of mtPaint just out.
http://github.com/wjaguar/mtPaint

It opens the SVG format which can come in handy.
I made a pet and it's available

http://www.datafilehost.com/download-1ac1f5c9.html

__________________________________________________

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Re: new mtpaint available

#76 Post by shinobar »

don570 wrote:There's a new version of mtPaint just out.
http://github.com/wjaguar/mtPaint
It opens the SVG format which can come in handy.
I made a pet and it's available
http://www.datafilehost.com/download-1ac1f5c9.html
Thanks, got it, seems working fine.

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

mtpaint compile

#77 Post by don570 »

I compiled mtpaint on lighthouse 4.43
using configuration

Code: Select all

./configure --bindir=/usr/bin release GIF gif jpeg tiff gtk2 staticft intl
Then I monkeyed around with the links and libraries until
I got a pet that would run on a bunch of Puppies including luci218

Also I made sure that desktop file had the same odd name that Puppy
uses in order to block the original desktop file.

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

Portability of customized Lupq

#78 Post by shinobar »

I discussed before at the topic of Lucid Puppy 5.1 development on the portability of the customized Lucid Puppy.
Of course our QuickSet edition(lupq) still keeps the portability with the customized one.

Imagine a lupq pre-installed your favourite browser, applications and language pack.
You can bring it with you to another PC, Internet café, or present it to your friends.

There are 2 options, remaster CD or USB pen drive with pupsave(lupqsave).
Remastaring is not so difficult using the remasterpup2. There can be some tips and traps, but I do not describe the detail here.

USB pen drive is so easy if the PC can boot up from it. Use frugalinstaller and grub4dosconfig both lupq has.
  1. Install lupq on a USB drive, do not make pupsave at this point of time.
    The Furugal installer with Grub4DosConfig is easy and safe. You can setup all the things accepting the defaults except at the first dialog of the Grub4DosConfig. Select the target drive and recommended to tik on the 'Search within only this drive'.
    Image
    If you find the difficulty with boot up the USB drive on your PC, try the Boot Flash.
  2. boot up from the drive.
  3. reboot and make pupsave first. install nothing before making pupsave.
  4. install browser, libflashplayer, any of your favourite applications and language pack if you need.
  5. shutdown PC. The pupsave shall be updated and powered off. Then take out the USB drive
Thats all.

TIPS:
  • Once you run xorgwizard, then the xorg.conf be sticky on the PC. Copy /etc/X11/xorg.conf1 to /etc/X11/xorg.conf to recover portability. And type next command on the virtual terminal to sync the keyboard layout.

    Code: Select all

    keymap-set --load
  • To arise countrywizard automatically, remove /root/.config/firstsetup directory.
Last edited by shinobar on Tue 31 Aug 2010, 00:12, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

nooby
Posts: 10369
Joined: Sun 29 Jun 2008, 19:05
Location: SwedenEurope

#79 Post by nooby »

I fail to find lupq 6 on the mirror.
I use Google Search on Puppy Forum
not an ideal solution though

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

mirror

#80 Post by shinobar »

nooby wrote:I fail to find lupq 6 on the mirror.
Takes some days delay on the mirror.
Download from the primary on that case please.

Post Reply