The time now is Wed 12 Mar 2014, 10:15
All times are UTC - 4 |
| Author |
Message |
postfs1
Joined: 27 Mar 2010
Posts: 831
|
 Posted: Sat 27 Mar 2010, 07:02 Post subject:
 Microsoft Lifecam NX-6000 in LX Puppy-4.30 or Lupu or Quirky
Subject description: no sound from snd-usb-audio |
|
Good day all.
I have 3 audio devices on my PC: MB's audio device, TV FM tuner and Web-camera.
I tried to use web-camera "Microsoft Lifecam NX-6000" in -=Puppy Linux-4.30=- and -=Puppy Linux-4.31=-, but got only video stream.
I tried to edit ISO file and the last version of the script for editing looks so:
| Code: |
#!/bin/bash
#cat /proc/asound/cards
#dmesg
#Files in -=home=->
#1)pup-430.iso 2)75dpi (FOLDER w/ *pcf.gz)
#3)100dpi (FOLDER w/ *pcf.gz) 4)cyrillic (FOLDER w/ *pcf.gz)
#5)misc (FOLDER w/ *pcf.gz)
#Audio devices:
#1)MB's NVidia nForce2 with ALC655 -->> snd-intel8x0
#2)Microsoft LifeCam NX-6000 -->> snd-usb-audio
#3)Behold TV 609 FM -->> saa7134-alsa
#STEP 1
cd /mnt ; chmod ugo+rwx data ;
echo "1" ;
mount -t iso9660 -o rw,loop=/dev/loop1 /home/pup-430.iso /mnt/data ;
echo "2" ;
cd /mnt ; mkdir data_sfs_pup ; chmod ugo+rwx data_sfs_pup ;
echo "3" ;
cp /mnt/data/pup-430.sfs /home ;
echo "4" ;
mount -t squashfs -o rw,loop=/dev/loop4 /home/pup-430.sfs /mnt/data_sfs_pup ;
echo "5" ;
cd / ; mkdir 430_iso pup-430 ; chmod ugo+rwx 430_iso ; chmod ugo+rwx pup-430 ;
echo "6" ;
cp -r /mnt/data/* /430_iso ;
echo "7" ;
cp -r /mnt/data_sfs_pup/* /pup-430 ;
echo "8" ;
echo '#!/bin/bash' > /pup-430/etc/rc.d/rc.local ;
echo '#this file called from rc.sysinit' >> /pup-430/etc/rc.d/rc.local ;
echo '#you can edit this file' >> /pup-430/etc/rc.d/rc.local ;
echo '#When firewall is installed, will append lines to this file...' >> /pup-430/etc/rc.d/rc.local ;
#echo 'modprobe uvcvideo' >> /pup-430/etc/rc.d/rc.local ;
#echo 'modprobe snd-usb-audio' >> /pup-430/etc/rc.d/rc.local ;
cd /pup-430/etc/rc.d ;
chmod +rwx rc.local ;
echo "9" ;
#echo 'install uvcvideo /sbin/modprobe snd_usb_audio ; /sbin/modprobe --ignore-install uvcvideo' >> /pup-430/etc/modprobe.conf
echo "10" ;
cd /pup-430/etc ;
mkdir modprobe.d ;
echo 'options saa7134 card=129 tuner=38 secam=d latency=64' > /pup-430/etc/modprobe.d/saa7134 ;
echo 'options saa7134-alsa index=2' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias bttv off' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias cx88xx off' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias ivtv off' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias usbvision off' >> /pup-430/etc/modprobe.d/saa7134 ;
#ok
echo 'alias /dev/mixer snd-mixer-oss' > /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/amixer snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/sequencer* snd-seq-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/dsp* snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/audio* snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/adsp* snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias /dev/dmfm snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/dmmidi snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/midi* snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias char-major-116 snd' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias char-major-14 soundcore' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo '# Set this to the correct number of cards. I have 3 so' >> /pup-430/etc/modprobe.d/sound ;
echo 'options snd cards_limit=3' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias snd-card-0 snd-intel8x0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-slot-0 snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'options snd-intel8x0 index=0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-0 snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-1 snd-seq-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-3 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-8 snd-seq-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-12 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo '#alias /dev/audio0 snd-intel8x0' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias snd-card-1 snd-usb-audio' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-slot-1 snd-card-1' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo '#Remember the IDs ? We use them here. Just put 0x in front.' >> /pup-430/etc/modprobe.d/sound ;
echo 'options snd-usb-audio index=1 vid=0x045e pid=0x00f8' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-1-0 snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-1-3 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-1-12 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo '#alias /dev/audio1 snd-usb-audio' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias snd-card-2 saa7134-alsa' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-slot-2 snd-card-2' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'options saa7134-alsa index=2' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-2-0 snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-2-3 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-2-12 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo '#alias /dev/audio2 saa7134-alsa' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'options uvcvideo quirks=2 nodrop=1' > /pup-430/etc/modprobe.d/uvcvideo ;
echo 'options snd-usb-audio index=1 vid=0x045e pid=0x00f8' >> /pup-430/etc/modprobe.d/uvcvideo ;
#ok--to-modprobe_conf
echo 'install sound-slot-0 /sbin/modprobe snd-card-0' >> /pup-430/etc/modprobe.conf ;
echo 'install sound-slot-1 /sbin/modprobe snd-card-1' >> /pup-430/etc/modprobe.conf ;
echo 'install sound-slot-2 /sbin/modprobe snd-card-2' >> /pup-430/etc/modprobe.conf ;
#ok
echo '#Cause optional modules to be loaded above generic modules' >> /pup-430/etc/modprobe.conf ;
echo 'install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
echo '#Workaround at bug #499695 -reverted in Ubuntu see LP #319505-' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-pcm /sbin/modprobe --ignore-install snd-pcm && { /sbin/modprobe --quiet snd-pcm-oss ; : ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-mixer /sbin/modprobe --ignore-install snd-mixer && { /sbin/modprobe --quiet snd-mixer-oss ; : ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-seq /sbin/modprobe --ignore-install snd-seq && { /sbin/modprobe --quiet snd-seq-midi ; /sbin/modprobe --quiet snd-seq-oss ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
echo 'install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
echo '#Cause optional modules to be loaded above sound card driver modules' >> /pup-430/etc/modprobe.conf ;
##echo 'install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }' >> /pup-430/etc/modprobe.conf ;
##echo 'install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-intel8x0 ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install uvcvideo /sbin/modprobe --ignore-install uvcvideo $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-usb-audio ; }' >> /pup-430/etc/modprobe.conf ;
#ok
#echo "#Load--saa7134-alsa_instead_of_saa7134--which gets dragged in by it anyway-" >> /pup-430/etc/modprobe.conf ;
#echo 'install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
#echo '#Ubuntu #62691, enable MPU for snd-cmipci' >> /pup-430/etc/modprobe.conf ;
#echo 'options snd-cmipci mpu_port=0x330 fm_port=0x388' >> /pup-430/etc/modprobe.conf ;
#echo '#Keep snd-pcsp from being loaded as first soundcard' >> /pup-430/etc/modprobe.conf ;
#echo 'options snd-pcsp index=-2' >> /pup-430/etc/modprobe.conf ;
#ok
#ok
echo '#This file lists those modules which we don_t want to be loaded by' > /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#alias_expansion, usually_so_some_other_driver_will_be_loaded for the' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#device instead.' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#evbug is a debug tool that should be loaded explicitly' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist evbug' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#these drivers are very simple, the HID drivers are usually preferred' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist usbmouse' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist usbkbd' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by e100' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist eepro100' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by tulip' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist de4x5' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#causes no end of confusion by creating unexpected network interfaces' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist eth1394' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#snd_intel8x0m can interfere with snd_intel8x0, doesn_t seem to support much' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#hardware on its own -Ubuntu bug #2011, #6810-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist snd_intel8x0m' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#Conflicts with dvb driver -which is better for handling this device-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist snd_aw2' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#causes failure to suspend on HP compaq nc6000 -Ubuntu: #10306-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist i2c_i801' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by p54pci' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist prism54' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by b43 and ssb.' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist bcm43xx' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#most apps now use garmin usb driver directly -Ubuntu: #114565-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist garmin_gps' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by asus-laptop -Ubuntu: #184721-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist asus_acpi' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#low-quality, just noise when being used for sound playback, causes' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#hangs at desktop session start -Ubuntu: #246969-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist snd_pcsp' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#ugly_and_loud_noise, getting on everyone_s nerves--this_should_be_done_by_a' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#nice_pulseaudio_bing -Ubuntu: #77010-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist pcspkr' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#EDAC driver for amd76x clashes with the agp driver preventing the aperture' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#from being initialised -Ubuntu: #297750-. Blacklist so that the driver' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#continues to build and is installable for the few cases where its' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#really needed.' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist amd76x_edac' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
cd /pup-430/usr/X11/lib/X11/fonts/ ;
rm -r misc ;
cd / ;
cp -r /home/75dpi /pup-430/usr/X11/lib/X11/fonts/ ;
cp -r /home/100dpi /pup-430/usr/X11/lib/X11/fonts/ ;
cp -r /home/cyrillic /pup-430/usr/X11/lib/X11/fonts/ ;
cp -r /home/misc /pup-430/usr/X11/lib/X11/fonts/ ;
#ok
echo '"75dpi" 0 ".dir"' >> /pup-430/usr/X11/lib/X11/fonts/fonts.cache-1 ;
echo '"100dpi" 0 ".dir"' >> /pup-430/usr/X11/lib/X11/fonts/fonts.cache-1 ;
echo '"cyrillic" 0 ".dir"' >> /pup-430/usr/X11/lib/X11/fonts/fonts.cache-1 ;
#STEP 2
#now, gonna make the SFS and ISO
#making SFS
cd / ;
dir2sfs pup-430 ;
echo "11" ;
mv pup-430_430.sfs pup-430.sfs ;
rm /430_iso/pup-430.sfs ;
echo "12" ;
cp pup-430.sfs /430_iso ;
#making ISO
rm /430_iso/boot.cat ;
cd / ;
mkisofs -D -input-charset iso8859-1 -R -o pup-430.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table 430_iso ;
echo "done"
|
-=hardinfo=- shows only 2 audio adapters: "NVidia nForce2"(MB's audio device) and "SAA7134"(TV FM tuner). After editing of ISO file -=ALSACONF=- and -=ALSAMIXER=- see all three audio devices. -=Guvcview=- does not see web-camera's audio device. In -=Linux Ubuntu-10.04=- "Microsoft Lifecam NX-6000" works ok.
_________________
- I don't know why laboratories are named a hospitals.
- The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.
Last edited by postfs1 on Wed 10 Aug 2011, 19:18; edited 5 times in total
|
|
Back to top
|
|
 |
postfs1
Joined: 27 Mar 2010
Posts: 831
|
| Posted: Sat 27 Mar 2010, 07:17 Post subject:
|
|
As for updating of -=ALSA=- so i had no luck with it. I tried to edit ISO by the following script:
| Code: |
#!/bin/bash
#cat /proc/asound/cards
#dmesg
#Files in -=home=->
#X)X->>devx_430.sfs 2)pup-430.iso 3)75dpi (FOLDER w/ *pcf.gz)
#4)100dpi (FOLDER w/ *pcf.gz) 5)cyrillic (FOLDER w/ *pcf.gz)
#6) misc (FOLDER w/ *pcf.gz) X)X->>kernel_src-2.6.30.5-patched.sfs4.pet
#8) alsa-3in1-k26305-1.0.22-i486.pet 9)alsa-firmware-1.0.20-i486.pet
#STEP 1
cd /home ;
#mv kernel_src-2.6.30.5-patched.sfs4.pet kernel_src-2.6.30.5-patched.sfs4.tar.gz ;
#tar -xzf kernel_src-2.6.30.5-patched.sfs4.tar.gz ;
echo "ok" ;
mv alsa-3in1-k26305-1.0.22-i486.pet alsa-3in1-k26305-1.0.22-i486.tar.gz ;
tar -xzf alsa-3in1-k26305-1.0.22-i486.tar.gz ;
echo "ok" ;
mv alsa-firmware-1.0.20-i486.pet alsa-firmware-1.0.20-i486.tar.gz ;
tar -xzf alsa-firmware-1.0.20-i486.tar.gz ;
cd /mnt ; chmod ugo+rwx data ;
echo "1" ;
mount -t iso9660 -o rw,loop=/dev/loop1 /home/pup-430.iso /mnt/data ;
echo "2" ;
cd /mnt ; mkdir data_sfs_pup ; chmod ugo+rwx data_sfs_pup ;
#mkdir devx_sfs_pup ; chmod ugo+rwx devx_sfs_pup ;
echo "3" ;
cp /mnt/data/pup-430.sfs /home ;
echo "4" ;
mount -t squashfs -o rw,loop=/dev/loop4 /home/pup-430.sfs /mnt/data_sfs_pup ;
#mount -t squashfs -o rw,loop=/dev/loop5 /home/devx_430.sfs /mnt/devx_sfs_pup ;
echo "5" ;
cd / ; mkdir 430_iso pup-430 ; chmod ugo+rwx 430_iso ; chmod ugo+rwx pup-430 ;
echo "6" ;
cp -r /mnt/data/* /430_iso ;
echo "7" ;
cp -r /mnt/data_sfs_pup/* /pup-430 ;
#cp -r -u /mnt/devx_sfs_pup/* /pup-430 ;
#cp -r -u /home/kernel_src-2.6.30.5-patched.sfs4/* /pup-430 ;
cp -r /home/alsa-3in1-k26305-1.0.22-i486/* /pup-430 ;
cp -r /home/alsa-firmware-1.0.20-i486/* /pup-430 ;
xmessage 'you can make stop' ;
echo "8" ;
echo '#!/bin/bash' > /pup-430/etc/rc.d/rc.local ;
echo '#this file called from rc.sysinit' >> /pup-430/etc/rc.d/rc.local ;
echo '#you can edit this file' >> /pup-430/etc/rc.d/rc.local ;
echo '#When firewall is installed, will append lines to this file...' >> /pup-430/etc/rc.d/rc.local ;
#echo 'modprobe uvcvideo' >> /pup-430/etc/rc.d/rc.local ;
#echo 'modprobe snd-usb-audio' >> /pup-430/etc/rc.d/rc.local ;
cd /pup-430/etc/rc.d ;
chmod +rwx rc.local ;
echo "9" ;
#echo 'install uvcvideo /sbin/modprobe snd_usb_audio ; /sbin/modprobe --ignore-install uvcvideo' >> /pup-430/etc/modprobe.conf
echo "10" ;
cd /pup-430/etc ;
mkdir modprobe.d ;
echo 'options saa7134 card=129 tuner=38 secam=d latency=64' > /pup-430/etc/modprobe.d/saa7134 ;
echo 'options saa7134-alsa index=2' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias bttv off' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias cx88xx off' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias ivtv off' >> /pup-430/etc/modprobe.d/saa7134 ;
echo 'alias usbvision off' >> /pup-430/etc/modprobe.d/saa7134 ;
#ok
echo 'alias /dev/mixer snd-mixer-oss' > /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/amixer snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/sequencer* snd-seq-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/dsp* snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/audio* snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/adsp* snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias /dev/dmfm snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/dmmidi snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias /dev/midi* snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias char-major-116 snd' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias char-major-14 soundcore' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo '# Set this to the correct number of cards. I have 3 so' >> /pup-430/etc/modprobe.d/sound ;
echo 'options snd cards_limit=3' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias snd-card-0 snd-intel8x0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-slot-0 snd-card-0' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'options snd-intel8x0 index=0' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-0 snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-1 snd-seq-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-3 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-8 snd-seq-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-0-12 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo '#alias /dev/audio0 snd-intel8x0' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias snd-card-1 snd-usb-audio' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-slot-1 snd-card-1' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo '#Remember the IDs ? We use them here. Just put 0x in front.' >> /pup-430/etc/modprobe.d/sound ;
echo 'options snd-usb-audio index=1 vid=0x045e pid=0x00f8' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-1-0 snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-1-3 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-1-12 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo '#alias /dev/audio1 snd-usb-audio' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'alias snd-card-2 saa7134-alsa' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-slot-2 snd-card-2' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'options saa7134-alsa index=2' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-2-0 snd-mixer-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-2-3 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo 'alias sound-service-2-12 snd-pcm-oss' >> /pup-430/etc/modprobe.d/sound ;
echo '#alias /dev/audio2 saa7134-alsa' >> /pup-430/etc/modprobe.d/sound ;
#ok
echo 'options uvcvideo quirks=2 nodrop=1' > /pup-430/etc/modprobe.d/uvcvideo ;
echo 'options snd-usb-audio index=1 vid=0x045e pid=0x00f8' >> /pup-430/etc/modprobe.d/uvcvideo ;
#ok--to-modprobe_conf
echo 'install sound-slot-0 /sbin/modprobe snd-card-0' >> /pup-430/etc/modprobe.conf ;
echo 'install sound-slot-1 /sbin/modprobe snd-card-1' >> /pup-430/etc/modprobe.conf ;
echo 'install sound-slot-2 /sbin/modprobe snd-card-2' >> /pup-430/etc/modprobe.conf ;
#ok
echo '#Cause optional modules to be loaded above generic modules' >> /pup-430/etc/modprobe.conf ;
echo 'install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
echo '#Workaround at bug #499695 -reverted in Ubuntu see LP #319505-' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-pcm /sbin/modprobe --ignore-install snd-pcm && { /sbin/modprobe --quiet snd-pcm-oss ; : ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-mixer /sbin/modprobe --ignore-install snd-mixer && { /sbin/modprobe --quiet snd-mixer-oss ; : ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-seq /sbin/modprobe --ignore-install snd-seq && { /sbin/modprobe --quiet snd-seq-midi ; /sbin/modprobe --quiet snd-seq-oss ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
echo 'install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
echo '#Cause optional modules to be loaded above sound card driver modules' >> /pup-430/etc/modprobe.conf ;
##echo 'install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }' >> /pup-430/etc/modprobe.conf ;
##echo 'install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-intel8x0 ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install uvcvideo /sbin/modprobe --ignore-install uvcvideo $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-usb-audio ; }' >> /pup-430/etc/modprobe.conf ;
#ok
#echo "#Load--saa7134-alsa_instead_of_saa7134--which gets dragged in by it anyway-" >> /pup-430/etc/modprobe.conf ;
#echo 'install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; }' >> /pup-430/etc/modprobe.conf ;
echo 'install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }' >> /pup-430/etc/modprobe.conf ;
#ok
#echo '#Ubuntu #62691, enable MPU for snd-cmipci' >> /pup-430/etc/modprobe.conf ;
#echo 'options snd-cmipci mpu_port=0x330 fm_port=0x388' >> /pup-430/etc/modprobe.conf ;
#echo '#Keep snd-pcsp from being loaded as first soundcard' >> /pup-430/etc/modprobe.conf ;
#echo 'options snd-pcsp index=-2' >> /pup-430/etc/modprobe.conf ;
#ok
#ok
echo '#This file lists those modules which we don_t want to be loaded by' > /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#alias_expansion, usually_so_some_other_driver_will_be_loaded for the' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#device instead.' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#evbug is a debug tool that should be loaded explicitly' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist evbug' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#these drivers are very simple, the HID drivers are usually preferred' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist usbmouse' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist usbkbd' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by e100' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist eepro100' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by tulip' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist de4x5' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#causes no end of confusion by creating unexpected network interfaces' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist eth1394' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#snd_intel8x0m can interfere with snd_intel8x0, doesn_t seem to support much' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#hardware on its own -Ubuntu bug #2011, #6810-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist snd_intel8x0m' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#Conflicts with dvb driver -which is better for handling this device-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist snd_aw2' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#causes failure to suspend on HP compaq nc6000 -Ubuntu: #10306-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist i2c_i801' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by p54pci' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist prism54' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by b43 and ssb.' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist bcm43xx' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#most apps now use garmin usb driver directly -Ubuntu: #114565-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist garmin_gps' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#replaced by asus-laptop -Ubuntu: #184721-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist asus_acpi' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#low-quality, just noise when being used for sound playback, causes' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#hangs at desktop session start -Ubuntu: #246969-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist snd_pcsp' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#ugly_and_loud_noise, getting on everyone_s nerves--this_should_be_done_by_a' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#nice_pulseaudio_bing -Ubuntu: #77010-' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist pcspkr' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
echo '#EDAC driver for amd76x clashes with the agp driver preventing the aperture' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#from being initialised -Ubuntu: #297750-. Blacklist so that the driver' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#continues to build and is installable for the few cases where its' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo '#really needed.' >> /pup-430/etc/modprobe.d/blacklist.conf ;
echo 'blacklist amd76x_edac' >> /pup-430/etc/modprobe.d/blacklist.conf ;
#ok
cd /pup-430/usr/X11/lib/X11/fonts/ ;
rm -r misc ;
cd / ;
cp -r /home/75dpi /pup-430/usr/X11/lib/X11/fonts/ ;
cp -r /home/100dpi /pup-430/usr/X11/lib/X11/fonts/ ;
cp -r /home/cyrillic /pup-430/usr/X11/lib/X11/fonts/ ;
cp -r /home/misc /pup-430/usr/X11/lib/X11/fonts/ ;
#ok
echo '"75dpi" 0 ".dir"' >> /pup-430/usr/X11/lib/X11/fonts/fonts.cache-1 ;
echo '"100dpi" 0 ".dir"' >> /pup-430/usr/X11/lib/X11/fonts/fonts.cache-1 ;
echo '"cyrillic" 0 ".dir"' >> /pup-430/usr/X11/lib/X11/fonts/fonts.cache-1 ;
#STEP 2
#now, gonna make the SFS and ISO
#making SFS
cd / ;
dir2sfs pup-430 ;
echo "11" ;
mv pup-430_430.sfs pup-430.sfs ;
rm /430_iso/pup-430.sfs ;
echo "12" ;
cp pup-430.sfs /430_iso ;
#making ISO
#rm -r /home/kernel_src-2.6.30.5-patched.sfs4 ;
rm -r /home/alsa-firmware-1.0.20-i486 ;
rm -r /home/alsa-3in1-k26305-1.0.22-i486 ;
rm /430_iso/boot.cat ;
cd / ;
mkisofs -D -input-charset iso8859-1 -R -o pup-430.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table 430_iso ;
echo "done"
|
But it gave a life only to "SAA7134" in system.
_________________
- I don't know why laboratories are named a hospitals.
- The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.
Last edited by postfs1 on Wed 10 Aug 2011, 19:18; edited 3 times in total
|
|
Back to top
|
|
|
postfs1
Joined: 27 Mar 2010
Posts: 831
|
| Posted: Sat 27 Mar 2010, 07:26 Post subject:
|
|
In -=Linux Puppy-4.30=- i use -=audacity-nonfree-1.3.2-0.7.beta.lvn7.i386.rpm=- and -=guvcview-1.1.3-2.i386.rpm=-.
These programs give the following information:
-=1=-
| Code: |
sh-3.00# audacity
Expression 'ioctl( devHandle, SNDCTL_DSP_CHANNELS, &temp )' failed in 'src/hostapi/oss/pa_unix_oss.c', line: 394
|
-=2=-
| Code: |
sh-3.00# guvcview
guvcview: /usr/lib/libavcodec.so.52: no version information available (required by guvcview)
guvcview 1.1.3
Could not open /root/.guvcviewrc for read,
will try to create it
write /root/.guvcviewrc OK
Expression 'ioctl( devHandle, SNDCTL_DSP_CHANNELS, &temp )' failed in 'src/hostapi/oss/pa_unix_oss.c', line: 397
video device: /dev/video0
/dev/video0 - device 1
/dev/video1 - device 2
couldn't open idVendor: /sys/class/video4linux/video1/../../../idVendor
couldn't open idProduct: /sys/class/video4linux/video1/../../../idProduct
Init. Microsoft® LifeCam NX-6000 (location: usb-0000:00:02.2-2)
{ pixelformat = 'MJPG', description = 'MJPEG' }
{ discrete: width = 352, height = 288 }
Time interval between frame: 1/30,
{ discrete: width = 1600, height = 1200 }
Time interval between frame: 2/15,
{ discrete: width = 1280, height = 1024 }
Time interval between frame: 2/15,
{ discrete: width = 1024, height = 768 }
Time interval between frame: 2/15,
{ discrete: width = 800, height = 600 }
Time interval between frame: 1/30,
{ discrete: width = 640, height = 480 }
Time interval between frame: 1/30,
{ discrete: width = 320, height = 240 }
Time interval between frame: 1/30,
{ discrete: width = 176, height = 144 }
Time interval between frame: 1/30,
{ discrete: width = 160, height = 120 }
Time interval between frame: 1/30,
checking format: 1196444237
VIDIOC_G_COMP:: Invalid argument
compression control not supported
vid:045e
pid:00f8
driver:uvcvideo
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
(guvcview:16369): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
|
_________________
- I don't know why laboratories are named a hospitals.
- The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.
Last edited by postfs1 on Thu 15 Apr 2010, 07:22; edited 1 time in total
|
|
Back to top
|
|
|
ecomoney
Joined: 25 Nov 2005
Posts: 2183
Location: Lincolnshire, England
|
| Posted: Sat 27 Mar 2010, 08:34 Post subject:
|
|
Hi there, good luck with this...it looks complicated!
Its useful to know that even the Video Stream works with this cam. Im looking to buy 10 for use with a cybercafe....I would rather the profits not go to Micro$oft though!
The solution may just be a cheap mic...you can pick them up here in the U.K. from the £1 shop.
_________________
Puppy Linux's Mission
Sorry, my server is down atm!
|
|
Back to top
|
|
|
postfs1
Joined: 27 Mar 2010
Posts: 831
|
| Posted: Sat 27 Mar 2010, 22:26 Post subject:
|
|
Thanks for the advice.
I tried -=Linux Puppy Lupu-001=- | Code: | | >>http://www.diddywahdiddy.net/Puppy400/lupu-001.iso<< |
and it has appeared that web-camera "Microsoft Lifecam NX-6000" works well in this OS(-=ALSACONF=- loses this device as in non-edited -=Linux Puppy-4.30=-).
Program for webcam -=Guvcview=- can be downloaded from this page:
| Code: | | x://x.filefront.com/15956415/GuvcviewForPuppyLupu001.tar |
| Code: | y2010:m05:d02 ----->> GuvcviewForPuppyLupu001.tar <<--x--- y2010:m10:d20
x://x.filefactory.com/file/b16ad3e/n/GuvcviewForPuppyLupu001.tar |
| Code: |
List of files which were placed in folder -=GuvcviewForPuppyLupu001=-:
------------------------------------
directfb-1.0.0-1.0.120asp.i386.rpm
guvcview-1.1.3-2.i386.rpm
Install-Guvcview.sh
libavcodec52-0.5-31_git20091120.el3.i386.rpm
libavutil50-0.5-31_git20091120.el3.i386.rpm
libdc1394_22-2.0.2-11.el3.i386.rpm
libfaad0-2.6.1-13.el3.i386.rpm
libgsm1-1.0.13-2.el3.i386.rpm
libopencore-amrnb0-0.1.2-2.el3.i386.rpm
libopencore-amrwb0-0.1.2-2.el3.i386.rpm
libraw1394-1.2.1-9.0.120asp.i386.rpm
libschroedinger1.0_0-1.0.8-1pclos2010.i586.rpm
libtheora-1.0alpha8-0.3.svn13393.0.120asp.i386.rpm
nas-1.9-2.0.120asp.i386.rpm
portaudio-19-6_4_20071207.el3.i386.rpm
SDL-1.2.12-1.0.120asp.i386.rpm
twolame-0.3.10-1.0.120asp.i386.rpm
xvidcore-1.1.3-1.0.120asp.i386.rpm
|
Folder -=GuvcviewForPuppyLupu001=- can be added to multisessional CD-RW after first session by -=Pburn=- program.
-=Guvcview=- gives the following information:
| Code: |
bash-3.00# guvcview
guvcview: /usr/lib/libavcodec.so.52: no version information available (required by guvcview)
guvcview 1.1.3
video device: /dev/video0
/dev/video0 - device 1
/dev/video1 - device 2
couldn't open idVendor: /sys/class/video4linux/video1/../../../idVendor
couldn't open idProduct: /sys/class/video4linux/video1/../../../idProduct
Init. Microsoft® LifeCam NX-6000 (location: usb-0000:00:02.2-4)
{ pixelformat = 'MJPG', description = 'MJPEG' }
{ discrete: width = 352, height = 288 }
Time interval between frame: 1/30,
{ discrete: width = 1600, height = 1200 }
Time interval between frame: 2/15,
{ discrete: width = 1280, height = 1024 }
Time interval between frame: 2/15,
{ discrete: width = 1024, height = 768 }
Time interval between frame: 2/15,
{ discrete: width = 800, height = 600 }
Time interval between frame: 1/30,
{ discrete: width = 640, height = 480 }
Time interval between frame: 1/30,
{ discrete: width = 320, height = 240 }
Time interval between frame: 1/30,
{ discrete: width = 176, height = 144 }
Time interval between frame: 1/30,
{ discrete: width = 160, height = 120 }
Time interval between frame: 1/30,
checking format: 1196444237
VIDIOC_G_COMP:: Invalid argument
compression control not supported
vid:045e
pid:00f8
driver:uvcvideo
write /root/.guvcviewrc OK
free controls
cleaned allocations - 100%
Closing portaudio ...OK
|
For synchronization of recorded video and audio -=mencoder=- program with option "-nobps" can be used.
_________________
- I don't know why laboratories are named a hospitals.
- The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.
|
|
Back to top
|
|
|
don570
Joined: 10 Mar 2010
Posts: 3021
Location: Ontario
|
| Posted: Wed 20 Oct 2010, 13:23 Post subject:
pmusic 1.4.1 |
|
The newest version of pmusic 1.4.1 is supposed to work well
with multiple sound cards. I don't know if that will help your situation.
http://www.murga-linux.com/puppy/viewtopic.php?t=31206
____________________________________________________
|
|
Back to top
|
|
|
postfs1
Joined: 27 Mar 2010
Posts: 831
|
| Posted: Sat 08 Jan 2011, 20:50 Post subject:
|
|
concerning the theme videos:
| Quote: |
| Quote: | | http://www.youtube.com/watch?v=YL5bZlZqT_s |
| Quote: | | http://www.youtube.com/watch?v=UlTRwb_dFvQ |
|
Script for installation of the -=Guvcview=- program in -=Linux Quirky-1.40=-:
| Quote: |
Install_Guvcview--sr0--fc11.sh
| Code: |
#!/bin/bash
#
cd /room ;
#
if [ -x `ps -eocomm | grep dbus-daemon | head -1` ] ; then
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/dbus-libs-1.2.12-2.fc11.i586.rpm ;
if [ -x `echo -e "b75b063e1c7d4e4b952e58f37b08c101 dbus-libs-1.2.12-2.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i dbus-libs-1.2.12-2.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/dbus-libs-1.2.12-2.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#
else
xmessage "There is no need to install -=DBus=-" ;
fi ;
#1
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-12_files/guvcview-1.4.2-1.fc12.i686.rpm ;
if [ -x `echo -e "1b3e6fd5c03d74527433d39b5883a550 guvcview-1.4.2-1.fc12.i686.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i guvcview-1.4.2-1.fc12.i686.rpm ;
sleep 0.5s ;
rm /room/guvcview-1.4.2-1.fc12.i686.rpm ;
rm /room/.md-5.sm ;
#2
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/jack-audio-connection-kit-0.118.0-1.fc11.i586.rpm ;
if [ -x `echo -e "4365b5ad5883c821f303d0343f35c3ff jack-audio-connection-kit-0.118.0-1.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i jack-audio-connection-kit-0.118.0-1.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/jack-audio-connection-kit-0.118.0-1.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#3
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/libasyncns-0.7-2.fc11.i586.rpm ;
if [ -x `echo -e "40308579f2356c85e4365883cdcd441b libasyncns-0.7-2.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i libasyncns-0.7-2.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/libasyncns-0.7-2.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#4
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/libcap-ng-0.6.1-1.fc11.i586.rpm ;
if [ -x `echo -e "34b642892db2e550d851545602cd57a8 libcap-ng-0.6.1-1.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i libcap-ng-0.6.1-1.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/libcap-ng-0.6.1-1.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#5
#
#curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/libv4l-0.6.3-1.fc11.i586.rpm ;
#echo "b7a28a395252fd69176014420850ae41 libv4l-0.6.3-1.fc11.i586.rpm" > /room/md5sum_libv4l-0.6.3.txt ;
#xmessage "`md5sum -c md5sum_libv4l-0.6.3.txt | cat`" ;
#echo "ok" ;
#rpm -i libv4l-0.6.3-1.fc11.i586.rpm ;
#echo "ok" ;
#rm /room/md5sum_libv4l-0.6.3.txt ;
#rm /room/libv4l-0.6.3-1.fc11.i586.rpm ;
#
#curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/libv4l-0.6.1-1.fc11.i586.rpm ;
#echo "4994d40d98498b01df166d57eaf444bd libv4l-0.6.1-1.fc11.i586.rpm" > /room/md5sum_libv4l-0.6.1.txt ;
#xmessage "`md5sum -c md5sum_libv4l-0.6.1.txt | cat`" ;
#echo "ok" ;
#rpm -i libv4l-0.6.1-1.fc11.i586.rpm ;
#echo "ok" ;
#rm /room/md5sum_libv4l-0.6.1.txt ;
#rm /room/libv4l-0.6.1-1.fc11.i586.rpm ;
#
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/libv4l-0.5.9-1.fc11.i586.rpm ;
if [ -x `echo -e "d4bbbd80c0ffd8a288cb3b3de1138b81 libv4l-0.5.9-1.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i libv4l-0.5.9-1.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/libv4l-0.5.9-1.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#6
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/portaudio-19-8.fc11.i586.rpm ;
if [ -x `echo -e "f22283b777dad211a76e2d9693a8ffca portaudio-19-8.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i portaudio-19-8.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/portaudio-19-8.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#7
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/pulseaudio-libs-0.9.15-17.fc11.i586.rpm ;
if [ -x `echo -e "82c107d7cc061cedd3550427693c7734 pulseaudio-libs-0.9.15-17.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i pulseaudio-libs-0.9.15-17.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/pulseaudio-libs-0.9.15-17.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#8
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/tcp_wrappers-libs-7.6-55.fc11.i586.rpm ;
if [ -x `echo -e "b6e18f9418cd907d7ea0be9a8670035d tcp_wrappers-libs-7.6-55.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i tcp_wrappers-libs-7.6-55.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/tcp_wrappers-libs-7.6-55.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#9
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/gdbm-1.8.0-31.fc11.i586.rpm ;
if [ -x `echo -e "03146b734ebd86b3a8a12753ea7ddb64 gdbm-1.8.0-31.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i gdbm-1.8.0-31.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/gdbm-1.8.0-31.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#10
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/dirac-libs-1.0.2-2.fc11.i586.rpm ;
if [ -x `echo -e "d5748720d12d3687a1d1080b65ecc607 dirac-libs-1.0.2-2.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i dirac-libs-1.0.2-2.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/dirac-libs-1.0.2-2.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#11
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/faad2-libs-2.7-1.fc11.i586.rpm ;
if [ -x `echo -e "ac914de96a91c4b34ec4e91b9c67b436 faad2-libs-2.7-1.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i faad2-libs-2.7-1.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/faad2-libs-2.7-1.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#12
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/ffmpeg-libs-0.5.2-1.fc11.i586.rpm ;
if [ -x `echo -e "f5c8b0d2fbf7903ee7a7b2848699b6c2 ffmpeg-libs-0.5.2-1.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i ffmpeg-libs-0.5.2-1.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/ffmpeg-libs-0.5.2-1.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#13
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/gsm-1.0.12-7.fc11.i586.rpm ;
if [ -x `echo -e "385ec448c1d2b414288c6a389af356c9 gsm-1.0.12-7.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i gsm-1.0.12-7.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/gsm-1.0.12-7.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#14
#
rm /usr/bin/lame ;
rm /usr/lib/libmp3lame.so /usr/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0.0.0 ;
#
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/lame-libs-3.98.3-1.fc11.1.i586.rpm ;
if [ -x `echo -e "5effe95f1e6e7201724a0152bd2cf500 lame-libs-3.98.3-1.fc11.1.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i lame-libs-3.98.3-1.fc11.1.i586.rpm ;
sleep 0.5s ;
rm /room/lame-libs-3.98.3-1.fc11.1.i586.rpm ;
rm /room/.md-5.sm ;
#
ln -s -f /usr/lib/libmp3lame.so.0.0.0 /usr/lib/libmp3lame.so ;
#15
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/libstdc++-4.4.1-2.fc11.i586.rpm ;
if [ -x `echo -e "96c934cb092bf073ace9c10cce025f44 libstdc++-4.4.1-2.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i libstdc++-4.4.1-2.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/libstdc++-4.4.1-2.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#16
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/openjpeg-libs-1.3-5.fc11.i586.rpm ;
if [ -x `echo -e "d992a10193150c12296683e166b4f8fd openjpeg-libs-1.3-5.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i openjpeg-libs-1.3-5.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/openjpeg-libs-1.3-5.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#17
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/speex-1.2-0.11.rc1.fc11.i586.rpm ;
if [ -x `echo -e "7a6fdcb8ab2e032a09ee66e7c90f8847 speex-1.2-0.11.rc1.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i speex-1.2-0.11.rc1.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/speex-1.2-0.11.rc1.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#18
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/x264-libs-0.0.0-0.24.20090319gitc109c8.fc11.i586.rpm ;
if [ -x `echo -e "7ecb0e4213f54637feac3efeffd9b41e x264-libs-0.0.0-0.24.20090319gitc109c8.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i x264-libs-0.0.0-0.24.20090319gitc109c8.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/x264-libs-0.0.0-0.24.20090319gitc109c8.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#19
curl -C - -O file:///mnt/sr0/Guvcview/Fedora-11_files/xvidcore-1.2.1-3.fc11.i586.rpm ;
if [ -x `echo -e "d9ebe3f9a58be34f9051f6770aa7bdf4 xvidcore-1.2.1-3.fc11.i586.rpm" | md5sum -c - >/room/.md-5.sm ; sleep 0.5s ; grep -o 'OK' /room/.md-5.sm` ] ; then xmessage -file /room/.md-5.sm ; else yaf-splash -bg purple -fg green -text "`cat /room/.md-5.sm`" ; fi ;
rpm -i xvidcore-1.2.1-3.fc11.i586.rpm ;
sleep 0.5s ;
rm /room/xvidcore-1.2.1-3.fc11.i586.rpm ;
rm /room/.md-5.sm ;
#20
#
rm /usr/share/applications/guvcview.desktop ;
#
echo '[Desktop Entry]' > /usr/share/applications/Guvcview.desktop ;
echo 'Encoding=UTF-8' >> /usr/share/applications/Guvcview.desktop ;
echo 'Name=Guvcview' >> /usr/share/applications/Guvcview.desktop ;
echo 'Comment=The "Guvcview" program can take a video files from the web-camera' >> /usr/share/applications/Guvcview.desktop ;
echo 'Exec=guvcview' >> /usr/share/applications/Guvcview.desktop ;
echo 'Terminal=false' >> /usr/share/applications/Guvcview.desktop ;
echo 'Type=Application' >> /usr/share/applications/Guvcview.desktop ;
echo 'Categories=AudioVideo' >> /usr/share/applications/Guvcview.desktop ;
echo 'GenericName=Web-camera' >> /usr/share/applications/Guvcview.desktop ;
echo 'Icon=/usr/share/pixmaps/guvcview/camera.png' >> /usr/share/applications/Guvcview.desktop ;
#
rox -p=/root/Choices/ROX-Filer/PuppyPin ;
fixmenus ;
xmessage 'Program -=GUVCVIEW-1.4.2-1=- has been installed.' `jwm -restart`
|
Edit: 2011, nov 19.
|
Permissions for -=Install_Guvcview--sr0--fc11.sh=- were changed as shown:
| Code: |
cd /place_where_Install_Guvcview--sr0--fc11.sh_is_located ; chmod u+x Install_Guvcview--sr0--fc11.sh
|
By the way, in -=Linux Quirky=- or -=Lupu=- or -=Puppy=- good light is the reason of 30fps, and poor light is the reason of 15fps.
Almost off-topic:
The best programs for use of -=Microsoft Lifecam NX-6000=- in -=Microsoft Windows Vista SP1=- are:
1)STOIK Capturer>>> program gives 27fps what means that the light is not a reason of poor or good frame conveyer.
2)To make photos:
-=e2eSoft MyCam=- and -=My Screen Cam=-
3)ArcSoft Magic-i(not freeware) >>> gives a hope that web-camera is not broken.
4)ACE Mega CodecS Pack 6.03 - Professional Edition >>> Gives a various versions of MJPEG codec. Some programs for web-camera allow to choose what codec will be used.
5)VideoCaptureMaster(not freeware) >>> maybe one day it will work without crashing, maybe good version is already exists among those who have paid.
_________________
- I don't know why laboratories are named a hospitals.
- The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.
|
|
Back to top
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Forum index » Advanced Topics » Hardware » Audio
