How to set up a Wacom Tablet
-
- Posts: 17
- Joined: Wed 20 Oct 2010, 12:05
How to install Wacom in 4.3.1?
Hello,
Maybe this is bad practice, but I'm getting desperate to make my system operational. I got Wacom working in lupq, 5.1.1. But because of some unrelated issue, the wireless will not setup. It was suggested that I try a 4.3.1 system. Wireless works great; but I cant get the Wacom working. Apparently the .pet which worked nicely in 5.1.1 isnt a go for 4.3.1. Honestly, trying to follow the conversation about the various pets and linux versions leaves me dazed and confused.
In the 5.1.1, it was
1. download and install XXX.pet
2. Add lines of text to xorg.conf
3. Working Wacom Tablet!
In 4.3.1 is it
1. Download and install ???.pet?
2. Use same text additions to xorg.conf (that worked in 5.1.1)?
Section "ServerLayout"
InputDevice "Synaptics Mouse" "AlwaysCore"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "cursor" "SendCoreEvents"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "Button2" "3"
Option "CursorProx" "256"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "PressCurve" "50,0,100,50"
Option "ForceDevice" "ISDV4"
Option "Button2" "3"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "Button2" "3"
EndSection
Thanks and best regards,
Joe
Maybe this is bad practice, but I'm getting desperate to make my system operational. I got Wacom working in lupq, 5.1.1. But because of some unrelated issue, the wireless will not setup. It was suggested that I try a 4.3.1 system. Wireless works great; but I cant get the Wacom working. Apparently the .pet which worked nicely in 5.1.1 isnt a go for 4.3.1. Honestly, trying to follow the conversation about the various pets and linux versions leaves me dazed and confused.
In the 5.1.1, it was
1. download and install XXX.pet
2. Add lines of text to xorg.conf
3. Working Wacom Tablet!
In 4.3.1 is it
1. Download and install ???.pet?
2. Use same text additions to xorg.conf (that worked in 5.1.1)?
Section "ServerLayout"
InputDevice "Synaptics Mouse" "AlwaysCore"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "cursor" "SendCoreEvents"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "Button2" "3"
Option "CursorProx" "256"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "PressCurve" "50,0,100,50"
Option "ForceDevice" "ISDV4"
Option "Button2" "3"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "Button2" "3"
EndSection
Thanks and best regards,
Joe
I've been battling with this as well, and after trying various combinations i have noticed that the wacom setup seems to have less problems with xfce than jwm... i don't know why???
I have a Bamboo CTL-460
With puppy 4.3.1 i could get everything to work except pressure.
When i tried it in NOP which runs under xfce, everything worked!!
I had tried under puppy Lupu 5.1.1 with no sucsess.
then Lupq (which really has a friendly setup ), which worked without pressure.
Then on a hunch i frugaled i new puppy Lupu 5.1.1 and installed the xfce pet.
Charlie6s lupq kernal driver works on Lucid with xfce. Still having problems with pressure though.... i think it has somthing to do with the xorg driver... i don't really know???
I also tryed compiling a kernal driver but i don't really know what i am doing!!!
so the news is that lucid 5.1.1 with xfce is showing some positive results, if anyone wants to have a go at fixing the pressure problem i would be more than pleased
I have a Bamboo CTL-460
With puppy 4.3.1 i could get everything to work except pressure.
When i tried it in NOP which runs under xfce, everything worked!!
I had tried under puppy Lupu 5.1.1 with no sucsess.
then Lupq (which really has a friendly setup ), which worked without pressure.
Then on a hunch i frugaled i new puppy Lupu 5.1.1 and installed the xfce pet.
Charlie6s lupq kernal driver works on Lucid with xfce. Still having problems with pressure though.... i think it has somthing to do with the xorg driver... i don't really know???
I also tryed compiling a kernal driver but i don't really know what i am doing!!!
so the news is that lucid 5.1.1 with xfce is showing some positive results, if anyone wants to have a go at fixing the pressure problem i would be more than pleased
Lupu vs. LupQ
I wonder why it works on LupQ and not on Lupu.jump wrote:I had tried under puppy Lupu 5.1.1 with no sucsess.
then Lupq (which really has a friendly setup ), which worked without pressure.
They have different version of jwm, but not big difference.
MtPaint's are different version.
The kernel, glibc and xorg is the same...
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
which wacom driver?
I used earlier pet on my lighthouse 4.43 installation (equivalent to puppy4.3.1)Apparently the .pet which worked nicely in 5.1.1 isnt a go for 4.3.1. Honestly, trying to follow the conversation about the various pets and linux versions leaves me dazed and confused.
and it worked fine.
There's no need to panic while doing this. I just trash my bad xorg.conf file
and reboot. The fresh start creates a new xorg.conf and you can have another
try. The basic rule (as best I know) is
1) 'ServerLayout' section needs to be completely replaced
2) You must insert after mouse and keyboard definitions your definitions
for stylus , eraser, cursor,pad, touch.
...but maybe it's different for other wacom products. Look through this thread
for other suggestions. I use a wacom Bamboo tablet. Your computer is
very rare but you did get it to work once. That's good.
____________________________________________________
Another suggestion ..... I always save a copy of a working xorg.conf file
and keep notes on how I successfully installed something.
It's good practice.
_______________________________________________________________
Dejan has put together a new version of gimp
http://puppy.b0x.me/software/squeeze/gi ... queeze.pet
That works on luci as well
_________________________________________________
To shinobar .... It works beautifully on luci233 and lighthouse5 as well.
There's the problem with the recent versions of mtpaint but
the maintainer Dimitri is working on this. In fact I just got
an email from him .
_____________________________
____________________________________________________
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Re: How to install Wacom in 4.3.1?
Bonjour !
On page 1 this thread are given kernel dependent wacom drivers which also have the xorg driver included: see paragraph 2. on page 1 (for pup 4.3.1 non retro - i.e. with kernel 2.6.30.5 - you need the wacom-0.8.4-4-k2.6.30.5.pet and only this one. Then follow Pizzasgood howto (it is good to read carefully across his explanations to understand - as also to learn a bit more - how it works).
Afterwards edit the xorg.cong with addition of the wacom "bits": be carefull deleting or commenting the lines which are NOT RELEVANT of your hardware ( i.e. adding a '# ' without quotes in front of the line; then the commented lines must turn to grey color once commented=disabled): for instance, if a USB tablet connected then delete the lines containing "/dev/ttyS0" = related to a SERIAL tablet connection.
I personaly have deleted the comments as '# USB tablet only' as I experienced that text was not disabled (did not turned to grey color; and so could be interpreted as a command...in doubt I prefered to delete it) in the xorg.conf on some installations.
Example: see my copy of the wacom's xorg.conf bits on page 10.
Important: about "stylus" section,
There the ' Option "Mode" "Relative" ' lets the stylus moves as a mouse, i.e. the cursor does not return to one of the screen corners when stylus is lifted off the tablet. It is ggod to know that that option also prevent use of pressure sensitivity on mtpaint.
So if you need pressure using mtpaint then you need to comment (=disable) that line, ...and of course afterwards restart X server to activate the modified xorg.conf setting.
So hope this helps.
Sorry if beeing a bit too explicit.
Bien amicalement !
Charlie
«isnt a go for 4.3.1»Joe Jasniewski wrote:...Apparently the .pet which worked nicely in 5.1.1 isnt a go for 4.3.1. Honestly, trying to follow the conversation about the various pets and linux versions leaves me dazed and confused.
...
1. Download and install ???.pet?
2. Use same text additions to xorg.conf (that worked in 5.1.1)?
...
On page 1 this thread are given kernel dependent wacom drivers which also have the xorg driver included: see paragraph 2. on page 1 (for pup 4.3.1 non retro - i.e. with kernel 2.6.30.5 - you need the wacom-0.8.4-4-k2.6.30.5.pet and only this one. Then follow Pizzasgood howto (it is good to read carefully across his explanations to understand - as also to learn a bit more - how it works).
Afterwards edit the xorg.cong with addition of the wacom "bits": be carefull deleting or commenting the lines which are NOT RELEVANT of your hardware ( i.e. adding a '# ' without quotes in front of the line; then the commented lines must turn to grey color once commented=disabled): for instance, if a USB tablet connected then delete the lines containing "/dev/ttyS0" = related to a SERIAL tablet connection.
I personaly have deleted the comments as '# USB tablet only' as I experienced that text was not disabled (did not turned to grey color; and so could be interpreted as a command...in doubt I prefered to delete it) in the xorg.conf on some installations.
Example: see my copy of the wacom's xorg.conf bits on page 10.
Important: about "stylus" section,
Code: Select all
...
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "USB" "on"
Option "Mode" "Relative"
Option "AlwaysCore" "on"
Option "Speeed" "1.0"
Option "Threshold" "10"
EndSection
...
So if you need pressure using mtpaint then you need to comment (=disable) that line, ...and of course afterwards restart X server to activate the modified xorg.conf setting.
So hope this helps.
Sorry if beeing a bit too explicit.
Bien amicalement !
Charlie
success with Wary 094
I tried out the latest Puppy.
I was able to use my Wacom Bamboo tablet with Wary 094.
The pressure sensitivity worked with mtpaint 3.31
I installed wacom-0.8.4-4_xorg_driver.pet from
http://www.murga-linux.com/puppy/viewtopic.php?t=16491
It was simple to install because xorg.conf already had a
'ServerLayout' section
Note that it wouldn't work when I tried the following:
wacom-0.10.7_xorg_driver.pet
wacom-0.10.8_xorg_driver.pet
___________________________________________________
Note to Joe Jasniewski
It seems like wacom-0.8.4-4_xorg_driver.pet is
the only version that will work with Puppy 4.3.1
_____________________________________________
I was able to use my Wacom Bamboo tablet with Wary 094.
The pressure sensitivity worked with mtpaint 3.31
I installed wacom-0.8.4-4_xorg_driver.pet from
http://www.murga-linux.com/puppy/viewtopic.php?t=16491
It was simple to install because xorg.conf already had a
'ServerLayout' section
Note that it wouldn't work when I tried the following:
wacom-0.10.7_xorg_driver.pet
wacom-0.10.8_xorg_driver.pet
___________________________________________________
Note to Joe Jasniewski
It seems like wacom-0.8.4-4_xorg_driver.pet is
the only version that will work with Puppy 4.3.1
_____________________________________________
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I was thinking that I might buy a tablet input device for testing on Wary, but the Wacom Bamboo is not cheap, $239 (Perth, Australia, AU Dollars -- about same as US):
http://www.ple.com.au/?p=snapshot&inventory_id=749
Any online supplier that is significantly cheaper, or any alternate brand? -- surely something from China can be obtained for far less than that price.
http://www.ple.com.au/?p=snapshot&inventory_id=749
Any online supplier that is significantly cheaper, or any alternate brand? -- surely something from China can be obtained for far less than that price.
[url]https://bkhome.org/news/[/url]
cost of wacom Bamboo
Here in Canada you can get the WACOM BAMBOO for as little as
$69 CAN +16% sales tax but here's the catch...
The active area is only about 4x6 inches and there's no software inside.
This is good enough for me and probably for you since we get
the 'free' linux software. I like it for small artwork and drawings.
See my puppy on left.
There is a better model that has
Corel® Painter™ Essentials 4 inside the box. It's a good quality
program but it doesn't support layers and it's definitely not for linux.
http://www.wacom.com/bamboo/bamboo_pen.php
There is another competing company in China but who knows if
their product would work in Puppy.
I noticed that Ubuntu linux says it supports AIPTEK
http://www.aiptek.com/Tablets/ST12/Features/
https://help.ubuntu.com/community/AiptekTablet
_________________________________________________
$69 CAN +16% sales tax but here's the catch...
The active area is only about 4x6 inches and there's no software inside.
This is good enough for me and probably for you since we get
the 'free' linux software. I like it for small artwork and drawings.
See my puppy on left.
There is a better model that has
Corel® Painter™ Essentials 4 inside the box. It's a good quality
program but it doesn't support layers and it's definitely not for linux.
http://www.wacom.com/bamboo/bamboo_pen.php
There is another competing company in China but who knows if
their product would work in Puppy.
I noticed that Ubuntu linux says it supports AIPTEK
http://www.aiptek.com/Tablets/ST12/Features/
https://help.ubuntu.com/community/AiptekTablet
_________________________________________________
reporting success
I was able to use an earlier driver wacom-0.8.4-4-k2.6.30.5.pet
http://www.browserloadofcoolness.com/so ... 6.30.5.pet
on the latest luci 234 (just released )
However it still requires a pupsave file to be created first
because of period of black screen when choosing 'reboot'
_____________________________________________
http://www.browserloadofcoolness.com/so ... 6.30.5.pet
on the latest luci 234 (just released )
However it still requires a pupsave file to be created first
because of period of black screen when choosing 'reboot'
_____________________________________________
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I have done some research:
http://bkhome.org/blog/?viewDetailed=01918
http://bkhome.org/blog/?viewDetailed=01917
http://bkhome.org/blog/?viewDetailed=01915
I have compiled the Wacom 0.8.8-10 driver for Wary.
I also compiled the Wizardpen driver that supports many brands of tablets other than Wacom. Some of these other brands are about 1/3 the price of Wacom here in Australia.
http://bkhome.org/blog/?viewDetailed=01918
http://bkhome.org/blog/?viewDetailed=01917
http://bkhome.org/blog/?viewDetailed=01915
I have compiled the Wacom 0.8.8-10 driver for Wary.
I also compiled the Wizardpen driver that supports many brands of tablets other than Wacom. Some of these other brands are about 1/3 the price of Wacom here in Australia.
[url]https://bkhome.org/news/[/url]
mtpaint modified
I tested Barry's new wacom driver that he compiled for Wary
AVAILABLE HERE
I love it . Perfect. I don't have the problems that I still have in Lucid Puppy.
Note that this driver definitely doesn't work with Lucid Puppy
On a related subject...
I received a modified version of mtpaint 3.34.56 from the
maintainer Dimitri Groshev that was compiled in Slack Linux.
He made some quick changes in the method used for mouse position
in the mtpaint window and he succeeded. No problems
now in pressure sensitivity.
He asked me to test it. It works perfectly in several version of Puppy linux
Here are some quick notes:
Wary094 excellent except for one minor flaw...it wouldn't launch.
I launched the terminal and typed
The terminal gave the message 'libtiff.so.4 not found'. So I made a
link to the older version of libtiff I found in /usr/lib/.
mtpaint now launches and works very well.
luci234 and lupq511 don't save the tablet settings each time I quit
and then relaunch mtpaint.
Lighthouse 5F --- mtpaint 3.34.56 now works great with tablet
If you want to try out this application, here's
a download site...
http://www.datafilehost.com/download-ebf11bdd.html
Post any bugs you find.
___________________________________________________________
Edit: Barry Kauler will be incorporating mtpaint 3.34.57 in future
versions of Wary
_______________________________________________________
AVAILABLE HERE
I love it . Perfect. I don't have the problems that I still have in Lucid Puppy.
Note that this driver definitely doesn't work with Lucid Puppy
On a related subject...
I received a modified version of mtpaint 3.34.56 from the
maintainer Dimitri Groshev that was compiled in Slack Linux.
He made some quick changes in the method used for mouse position
in the mtpaint window and he succeeded. No problems
now in pressure sensitivity.
He asked me to test it. It works perfectly in several version of Puppy linux
Here are some quick notes:
Wary094 excellent except for one minor flaw...it wouldn't launch.
I launched the terminal and typed
Code: Select all
ldd mtpaint
The terminal gave the message 'libtiff.so.4 not found'. So I made a
link to the older version of libtiff I found in /usr/lib/.
mtpaint now launches and works very well.
luci234 and lupq511 don't save the tablet settings each time I quit
and then relaunch mtpaint.
Lighthouse 5F --- mtpaint 3.34.56 now works great with tablet
If you want to try out this application, here's
a download site...
http://www.datafilehost.com/download-ebf11bdd.html
Post any bugs you find.
___________________________________________________________
Edit: Barry Kauler will be incorporating mtpaint 3.34.57 in future
versions of Wary
_______________________________________________________
Last edited by don570 on Mon 08 Nov 2010, 20:35, edited 1 time in total.
tablet preferences for mtpaint
I received a suggestion from Dmitry Groshev, maintainer of mtPaint
to solve the problem of the pressure settings in mtpaint not being
persistant with multiple launches. The solution was simple.
I was setting the mtpaint tablet preference for everything I saw on the list
i.e. pad, erasor, stylus and cursor. Dmitry recommended only setting
the 'stylus' to work on the screen and leave the others alone.
That did the trick and now I can use mtpaint perfectly in
lupq511 and luci 235 (beta of Lucid Puppy5.2)
_____________________________________________
Here's the latest version of mtpaint (version 3.34.57) that fixed
all my problems. Hopefully it will be incorporated into the
next generation of Puppies.
http://www.datafilehost.com/download-fae7d43d.html
__________________________________
to solve the problem of the pressure settings in mtpaint not being
persistant with multiple launches. The solution was simple.
I was setting the mtpaint tablet preference for everything I saw on the list
i.e. pad, erasor, stylus and cursor. Dmitry recommended only setting
the 'stylus' to work on the screen and leave the others alone.
That did the trick and now I can use mtpaint perfectly in
lupq511 and luci 235 (beta of Lucid Puppy5.2)
_____________________________________________
Here's the latest version of mtpaint (version 3.34.57) that fixed
all my problems. Hopefully it will be incorporated into the
next generation of Puppies.
http://www.datafilehost.com/download-fae7d43d.html
__________________________________
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
CORRECTED wacom-0.10.8_xorg_driver-lupq511.pet for Lupq-511
Hi,
please find at bottom of page 10 this thread the corrected driver.
Again my apologizes to the forum, and many thanks to forum member Tempestuous.
Cheers, Charlie
please find at bottom of page 10 this thread the corrected driver.
Again my apologizes to the forum, and many thanks to forum member Tempestuous.
Cheers, Charlie
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Yes, charlie6 and I have been discussing the confusion in the latter part of this forum thread regarding compatibility of various wacom dotpets with different Puppy versions. Here's the overall situation:
The wacom drivers consist mainly of two components - an Xorg input plugin called wacom_drv.so, and a kernel module called wacom.ko.
There's also a udev rule which should load the kernel module (and plugin?) and some utilities for diagnosis.
The kernel module is obviously compatible only with the kernel version (and thus, Puppy version) it was compiled for.
Significantly, also, are the file location differences between Xorg versions;
Puppy 4.3.x and Wary both have Xorg 7.3 (xorg-server 1.3.0.0),
for which the plugin location is /usr/X11R7/lib/xorg/modules/input/
Puppy 5.x and Quirky both have Xorg 7.5 (xorg-server 1.7.6),
for which the plugin location is /usr/lib/xorg/modules/input/
To add further to this complexity, the very latest wacom drivers have a different release series for versions of Xorg after 7.5.
I have just compiled the latest wacom drivers (released October 2010), and consolidated them for Puppy 5.x and 4.3.x
The wacom drivers consist mainly of two components - an Xorg input plugin called wacom_drv.so, and a kernel module called wacom.ko.
There's also a udev rule which should load the kernel module (and plugin?) and some utilities for diagnosis.
The kernel module is obviously compatible only with the kernel version (and thus, Puppy version) it was compiled for.
Significantly, also, are the file location differences between Xorg versions;
Puppy 4.3.x and Wary both have Xorg 7.3 (xorg-server 1.3.0.0),
for which the plugin location is /usr/X11R7/lib/xorg/modules/input/
Puppy 5.x and Quirky both have Xorg 7.5 (xorg-server 1.7.6),
for which the plugin location is /usr/lib/xorg/modules/input/
To add further to this complexity, the very latest wacom drivers have a different release series for versions of Xorg after 7.5.
I have just compiled the latest wacom drivers (released October 2010), and consolidated them for Puppy 5.x and 4.3.x
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Puppy 5.1.x
The wacom drivers in Puppy 5.1.x are reasonably up to date, so the only thing missing is the udev rule, now attached.
After installing this dotpet, reboot.
Now modify your /etc/X11/xorg.conf file as per the instructions in the first post in this thread.
Restart X, or reboot.
The wacom drivers in Puppy 5.1.x are reasonably up to date, so the only thing missing is the udev rule, now attached.
After installing this dotpet, reboot.
Now modify your /etc/X11/xorg.conf file as per the instructions in the first post in this thread.
Restart X, or reboot.
- Attachments
-
- wacom-udev.pet
- (433 Bytes) Downloaded 639 times
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
But if you want to try the very latest wacom drivers with Puppy 5.1.x, here they are, separated into their 2 main components; Xorg input, and kernel module.
Try just the Xorg input first. It includes the udev rule and the xsetwacom utility.
The updated kernel module supports a few extra USB device ID's than the original version in Puppy 5.1.x Apart from that, I don't know if it's any more advanced.
These dotpets will rename the original Puppy 5.1.x wacom drivers to "wacom_drv.so-old" and "wacom.ko-old", just in case the new versions don't work, and you need to reinstate the originals.
Try just the Xorg input first. It includes the udev rule and the xsetwacom utility.
The updated kernel module supports a few extra USB device ID's than the original version in Puppy 5.1.x Apart from that, I don't know if it's any more advanced.
These dotpets will rename the original Puppy 5.1.x wacom drivers to "wacom_drv.so-old" and "wacom.ko-old", just in case the new versions don't work, and you need to reinstate the originals.
- Attachments
-
- xf86-input-wacom-0.10.8.pet
- for Xorg 7.5 up
- (81.24 KiB) Downloaded 823 times
-
- wacom-module-0.8.8-10-k2.6.33.2.pet
- for Puppy 5.1.x
- (14.14 KiB) Downloaded 686 times
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Puppy 4.1/4.2 and Puppy 4.3.x
Here is the complete wacom driver package; includes xorg plugin, kernel module, udev rule, and utilities: wacdump, xidump, xsetwacom, libwacomcfg.
Make sure you install the correct version !! Otherwise the wacom kernel module will be incompatible, and will obviously fail.
EDIT: 4.1/4.2 version was corrupt. Now fixed and uploaded.
Here is the complete wacom driver package; includes xorg plugin, kernel module, udev rule, and utilities: wacdump, xidump, xsetwacom, libwacomcfg.
Make sure you install the correct version !! Otherwise the wacom kernel module will be incompatible, and will obviously fail.
EDIT: 4.1/4.2 version was corrupt. Now fixed and uploaded.
- Attachments
-
- wacom-0.8.8-10-k2.6.25.16.pet
- for Puppy 4.1/4.2
- (109.73 KiB) Downloaded 550 times
-
- wacom-0.8.8-10-k2.6.30.5.pet
- for Puppy 4.3.x
- (110.39 KiB) Downloaded 620 times
Last edited by tempestuous on Tue 18 Jan 2011, 13:04, edited 2 times in total.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
For Wary, Barry has provided the latest wacom drivers here
http://distro.ibiblio.org/pub/linux/dis ... -10-w5.pet
This is exactly the same Xorg plugin I packaged for Puppy 4.3.x
http://distro.ibiblio.org/pub/linux/dis ... -10-w5.pet
This is exactly the same Xorg plugin I packaged for Puppy 4.3.x
successful test of new drivers
I was successful with the new driver of charlie6
(at bottom of page10) installing with wacom bamboo tablet.
I tried it on lupq511 and luci236 and it now
allows the proper shutdown procedure
so that a pupsave file can now be created.
______________________________________
mtpaint 3.34.57 works when the tablet preferences are
set up in the following manner....
Set 'stylus' to 'screen'
The other tools leave disabled.
Don't forget to tick 'opacity' and 'size'
or the pressure effect won't be seen .
___________________________________
_____________________________________
(at bottom of page10) installing with wacom bamboo tablet.
I tried it on lupq511 and luci236 and it now
allows the proper shutdown procedure
so that a pupsave file can now be created.
______________________________________
mtpaint 3.34.57 works when the tablet preferences are
set up in the following manner....
Set 'stylus' to 'screen'
The other tools leave disabled.
Don't forget to tick 'opacity' and 'size'
or the pressure effect won't be seen .
___________________________________
_____________________________________
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
That's the same as "xf86-input-wacom-0.10.8.pet" from above.don570 wrote:I was successful with the new driver of charlie6
(at bottom of page10)
The version above is smaller because the binary has been stripped.
Sure, the existing wacom kernel module should work fine with the upgraded wacom Xorg plugin, but users should consider upgrading the kernel module as well, since this was provided by the wacom developers as part of the 0.10.8 driver package.charlie6 wrote:to be used with the the already present wacom.ko
The upgraded kernel module I'm referring to is "wacom-module-0.8.8-10-k2.6.33.2.pet"
... and obviously, we're talking about Puppy 5.1.x/5.2