Ease-0.4

Paint programs, vector editors, 3d modelers, animation editors, etc.
Post Reply
Message
Author
DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

Ease-0.4

#1 Post by DPUP5520 »

Ease Presentation Editor. Was compiled using Luci-256 and hasn't been tested on any other version but should work just fine, please let me know if it is missing anything for any other versions or not working for you. Requires GLX support to work.

http://www.mediafire.com/?t3e71q3itzgr211

If you are using an Nvidia Graphics card download the Luci_Nvidia-256.35-k2.6.33.2-p5.pet after installing Ease.

1. Follow prompts to exit to prompt and run xorgwizard

2. startx

3. run the Nvidia X settings wizard

4. go to x server configuration settings and set resolution to zero

5. tab over to x screen and set color depth to 16.7 million (24bit).

6. Save to x configuration file and exit out.

7. Exit to prompt and run fixmenus and then startx and you are good to go.

Sorry I couldn't make it any easier but it took me forever to figure out how to do it this way as it is.

Edit: liblzma1 attached below for people missing the liblzma.so.1 dependency
Attachments
liblzma1-4.999.9B.pet
(146.49 KiB) Downloaded 870 times
Last edited by DPUP5520 on Wed 23 Mar 2011, 22:48, edited 1 time in total.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

User avatar
KusaNoKaito
Posts: 99
Joined: Fri 19 Feb 2010, 22:52
Location: Florida
Contact:

#2 Post by KusaNoKaito »

Wow, you're amazing! Ease is a nice app but obviously quite difficult to compile from source.

I'm searching for the libs to get it running in Lucid Puppy 5.1 and I'll be sure to post them here once I've found them all.

DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

#3 Post by DPUP5520 »

What libs are you still missing? I may be able to just add them in for you.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

User avatar
KusaNoKaito
Posts: 99
Joined: Fri 19 Feb 2010, 22:52
Location: Florida
Contact:

#4 Post by KusaNoKaito »

DPUP5520 wrote:What libs are you still missing? I may be able to just add them in for you.
I only know of one at the moment. I can't seem to find it. Here's the message I get in the console:

Code: Select all

$ ease
ease: error while loading shared libraries: liblzma.so.1: cannot open shared object file: No such file or directory
$ 

DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

#5 Post by DPUP5520 »

give me about 30 minutes and i'll post it up for you.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

#6 Post by DPUP5520 »

On second thought maybe this will work, open up the ppm and type in liblzma1 that package should have your missing lib.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

User avatar
KusaNoKaito
Posts: 99
Joined: Fri 19 Feb 2010, 22:52
Location: Florida
Contact:

#7 Post by KusaNoKaito »

DPUP5520 wrote:On second thought maybe this will work, open up the ppm and type in liblzma1 that package should have your missing lib.
Thank you, you have been allot of help. (makes me wish I could contribute more than I do)

I have tried getting this to work in puppy in the past but failed.

I am used to compiling programs I've created and not having to go after libs etc. (though I do make .pets of apps I can compile)

(maybe I could develop more powerful applications using some of the pre-made libs out there )

Anyway thanks again, now my puppy's complete.

DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

#8 Post by DPUP5520 »

No problem, glad to be of help. If you need help in the future don't hesitate to ask.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#9 Post by Lobster »

Using ATI graphic card
- brand new 256 Lucid with GLX
this is what I am getting

Code: Select all

# ease
IRQ's not enabled, falling back to busy waits: 2 0
** (ease:11191): DEBUG: ease-scrollable-embed.vala:77: 0.000000 1.000000

(ease:11191): ClutterGLX-CRITICAL **: Unable to make the stage window 0x1800029 the current GLX drawable
Segmentation fault
# 
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

#10 Post by DPUP5520 »

@ lobster
This was compiled on 256 unfortunately all my computers use Nvidia cards however I will look into your problem when I get home from work today. I believe you ATI cards may need the clutter-eglx dependency.

Edit: Did a quick look into it and it appears to be a problem with ATI's fgrlx driver.
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#11 Post by Lobster »

Many thanks - I did get it running and then got the BSOD (black screen of Death)
Had to reinstall my Puppy. That is when I got the message (did not run at all on the second installation) The first installation had the ATi crystal graphic driver as well as the GLX

It is a great program :)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#12 Post by Lobster »

tried on slacko beta 1

Code: Select all

# ease
ease: error while loading shared libraries: libpoppler-glib.so.4: cannot open shared object file: No such file or directory
# 
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

DPUP5520
Posts: 800
Joined: Wed 16 Feb 2011, 05:38

#13 Post by DPUP5520 »

I haven't used EASE since I created the pet and do not use slacko at all however try this and let me know if it works.
Attachments
libpopper-glib.pet
(71.23 KiB) Downloaded 667 times
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=69651][b][i]PupRescue 2.5[/i][/b][/url]
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=72178][b][i]Puppy Crypt 528[/i][/b][/url]

Cadejo
Posts: 75
Joined: Tue 30 Jun 2009, 02:55

#14 Post by Cadejo »

Wow! This should be built into puppy out of the box!

Post Reply