wireless / wifi cards confirmed to work in puppy

Message
Author
User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#61 Post by Aitch »

tempestuous/others

This may be useful to identify many wifi cards, but not sure drivers yet....

http://www.linlap.com/wiki/linux+wirele ... t+detector

tempestuous,

maybe worth contacting the dev...?


Aitch :)

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#62 Post by tempestuous »

Frank78 wrote:01:0f.0 0200: 11ab:2a01 (rev 43)
Yes, that's definitely a Marvell Libertas 88W8335 wifi chipset, for which there's currently no native Linux driver.

When trying ndiswrapper, it's essential that the "inf" file you load is located in the same directory as the other supporting Windows driver files (eg. "sys" and "cat" files). This is because the inf file references those other files.

It appears that Linux support for the Marvell 8835 chipset is planned for the future, probably to be incorporated into the mwl8k driver. I see on the linuxwireless mailing list that the all-important firmware has been authorised to be redistributed by Marvell.

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#63 Post by tempestuous »

Aitch wrote:maybe worth contacting the dev...?
Not as far as I'm concerned.
That utility is obviously doing what I already ask of users; determine the the device ID. This ultimately determines driver compatibility.
Knowing the name of the wifi chipset is secondary, and less useful.

Frank78
Posts: 4
Joined: Fri 01 Apr 2011, 06:01

#64 Post by Frank78 »

Ok great. Thanks for your help. Basically I will be reinstalling Windows XP and will also be installing Puppy. Once I work out where my driver is I'm Windows, I will try ndiswrapper again.

I just need to download service pack 3 before I do the Windows reinstall. But I am impressed with Puppy so far and hope to use it for some music production and basic photo/video editing.

Security wise, if I browse the web via Puppy, how easy is it for viruses to infect my files? I was considering doing a frugal install on my data partition (i.e. Windows and program files on c drive but data and puppy on d).

I've read instructions on creating separate partitions for Puppy and for a swap file etc but not sure what the benefits are.

User avatar
xman
Posts: 144
Joined: Thu 24 Sep 2009, 06:31

#65 Post by xman »

About year ago I lost XP drivers for wlg-pcm/II wireless pc card. Don't ask how, but they were gone for ever.:oops: I had and I still have original drivers on cd, but I was needing updated drivers to use WPA connection. And manufacturers download link was broken for ever, I thought.:evil:

I studied my card specs: age, latest date for drivers, appearance, properties, etc. Then I googled and googled, and finally found same card with different name and tapes :shock:: TEW-421PC (Version B1.1R). Then I downloaded driver package and unzipped XP drivers: Marvell 88w8335 [Libertas], and put them to some folder.

Now I have a reliable WPA connection in XP, Quirky and Wary (ndiswrapper, classic wizard), but not in Lupu-520,525 (SNS connects more often than classic, but OS freezes all the time).

Any comments?:roll:

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#66 Post by tempestuous »

Frank78 wrote:Once I work out where my driver is in Windows, I will try ndiswrapper again.
Yes, sometimes the driver files cannot easily be extracted from the vendor-supplied installer.
I just had a look at the Marvell driver files from a similar wifi device (TrendNet TEW-423PI) amd these are the 4 files I see:

mrv8335.cat
mrv8335.inf
MRV8335.sys
MRV8335XP.sys

... but unfortunately different vendors change the names of the driver files. For example, Netgear uses "NET" as prefix, and Linksys uses "LS" as prefix.

Jades
Posts: 466
Joined: Sat 07 Aug 2010, 22:07
Location: Somewhere in Blighty.
Contact:

#67 Post by Jades »

Netgear WN111v2
Puppy ver. - Lupu 5.01 and above.
Interface: USB.
Chipset: Atheros AR9170?
Device Driver (name & source): Came with Lupu, presumably ar9170usb based on what HardInfo says.
WiFi Protocols that work (A, B, G, N): Confirmed working with N, data sheet says device also supports B and G.
Security Protocols confirmed working (WEP, WPA, WPA2): WPA2-PSK, data sheet says it also supports WPA-PSK and WEP 64 & 128 bit.
Configured with (Wizard, Ndiswrapper, Manual, Other?): Network Wizard.

Notes & Issues: Worked straight out of the box without needing to download additional drivers, all I needed to do was configure it in Network Wizard (my network is set up using static IP addresses with DHCP off so it didn't set up automatically and I didn't use SNS). Works exceptionally well with Merlin (see sig), seemingly at the same or better speed as in XP using the official Netgear drivers although I haven't benchmarked this so can't say for certain. Not managed to get it to work properly with Zhaan, although this is most likely due to that machine being an 'experienced' AMD K6-2 500 machine with USB 1.1 only or something to do with the location.

Edit: Corrected typo. Well spotted tempestuous!
Last edited by Jades on Fri 15 Jul 2011, 00:28, edited 1 time in total.
Zhaan - AMD K6 2 500, 512MB RAM, ATI Rage 128 VR. Full install Wary 5.5 [url=http://tinyurl.com/dy66kh8]HardInfo Report[/url]
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#68 Post by tempestuous »

Jades wrote:Netgear WN111v2
...
Chipset: Atheros AN9170?
That's AR9170.

Jades wrote:Device Driver (name & source): Came with Lupu, presumably an9170usb based on what HardInfo says.
The Linux driver is ar9170usb. You can see this from your "lsmod" results, and you should also see the ar9170usb module listed in the Network Wizard.

User avatar
dk60902
Posts: 230
Joined: Sun 26 Sep 2010, 22:34
Location: In front of my computer

Netgear WG111v3

#69 Post by dk60902 »

deleted
Last edited by dk60902 on Thu 29 Mar 2012, 04:12, edited 1 time in total.

User avatar
Alucinary
Posts: 15
Joined: Tue 09 Sep 2008, 15:27
Location: UK

3G Huewai E160 (UK Providers - O2 & 3)

#70 Post by Alucinary »

Device Name & version (from package or device): Huawei E160
Puppy versions tested: Aquila Puppy (built from Woof using the latest Debian release at this time)
Interface (USB, PCMCIA, PCI, mini-PCI?): USB
Chipset: NA
Device Driver (name & source): NA
WiFi Protocols that work (A, B, G, N): untested
Security Protocols confirmed working (WEP, WPA, WPA2): untested
Configured with (Wizard, Ndiswrapper, Manual, Other?): PGRPS Wizard
Posted by & date: Alucinary 27/4/2011
Location of Original Post: UK
Notes & Issues: I found the following details necessary for my O2 service provider -
serial modem device file: /dev/ttyUSB0
apn: m-bb.o2.co.uk
username: o2bb
password: password
phone number: *99#
phone pin: [BLANK]

also unfortunately in order to get it to connect successfully i had to manually navigate to the options file [/etc/ppp/options] and alter the baud rate to 9600. it would then connect fine using the pgprs-connect. I have not been able to try the wireless router in this device, only the 3G...
[color=darkblue][size=75][i]"My Universe is what happens to my eyes and ears. Anything else is surmise and hearsay. For all I know, these people may not exist. You may not exist. I say what it occurs to me to say."[/i][/size][/color]

User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#71 Post by Aitch »

Alucinary

9600 [9.6kb] baud rate is way too slow for 3G which is a 3.6/7.2Mb capable device

see http://www.murga-linux.com/puppy/viewto ... 074#431074

or pm rerwin - dialup/wireless/3G modem guru

Aitch :)

User avatar
Alucinary
Posts: 15
Joined: Tue 09 Sep 2008, 15:27
Location: UK

re 9600

#72 Post by Alucinary »

Thanks; I also thought 9600 sounded too low when I initially tried it!

however... I had read on an O2 troubleshooting forum that this setting worked for other linux distros - I do not profess to understand why, but the device certainly isn't running at this speed as I am able to happily stream BBC iPlayer videos and Spotify tracks without buffering problems.

None the less I shall happily read the thread that you suggest and would be happy to help rerwin test their code :)

Incidentally, Puppy Linux is the only OS that I have reliably had this device working for now - even Windows for which it was designed fails regularly (I think that is more the O2 software more than anything though)
[color=darkblue][size=75][i]"My Universe is what happens to my eyes and ears. Anything else is surmise and hearsay. For all I know, these people may not exist. You may not exist. I say what it occurs to me to say."[/i][/size][/color]

User avatar
bender1077
Posts: 1
Joined: Thu 09 Jun 2011, 15:49

WUSB300N

#73 Post by bender1077 »

Hello! First post here, but enough with the small talk!

I did not see this USB adapter listed in the first post so....

Device Name & version : Linksys WUSB300N
Puppy versions tested: Wary 5.1.2
Interface : USB
Chipset: TOPDOG by Marvell
Device Driver : netmw245.inf
WiFi Protocols that work (A, B, G, N): B, G, N
Security Protocols confirmed working (WEP, WPA, WPA2): WPA2
Configured with (Wizard, Ndiswrapper, Manual, Other?): Ndiswrapper
Notes & Issues: When configuring this adapter on any linux distro I have found I can only use the driver directly from the install disc.

User avatar
RetroTechGuy
Posts: 2947
Joined: Tue 15 Dec 2009, 17:20
Location: USA

#74 Post by RetroTechGuy »

OK, so I skimmed the list a bit...

Suppose that you don't have a wireless card yet.

Suppose that you want to buy a brand new USB dongle, that supports WEP thru WPA2... And will operate under Lupu 5.20, correctly identified.

Don't want any mucking around (no windows drivers, etc), just plug it, run the configurator, and start cruising the web...

So, which brand/model would you buy if you were doing it today?

What might also be interesting is, what brands/models would you not buy?
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]

User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#75 Post by Aitch »

RTG

Good question

I'd answer by saying, 'It depends on the use you are going to put it to and location'

At home I have broadband, but occasionally test wifi - but only 54G not N

When I visit friends I often find they have N routers so I can get faster connections using an N dongle

I also spend a lot of time traveling, or on a boat so have a 1 watt [High power, with booster aerial] dongle for that, which also does N data rate, and with good long range connectivity

I prefer dongles that use Ralink chipsets, as they seem better supported

Of the 'mainstream' dongles, often supplied with routers, I might surprise some, but I wouldn't buy/use Belkin, as I had no end of trouble, with poor connections and dropouts, but found Linksys to be OK

This is a useful page for anyone asking the same question

http://users.linpro.no/janl/hardware/wifi.html

later info

http://linux-wless.passys.nl/

Aitch :)

User avatar
RetroTechGuy
Posts: 2947
Joined: Tue 15 Dec 2009, 17:20
Location: USA

#76 Post by RetroTechGuy »

Aitch wrote:RTG

Good question

I'd answer by saying, 'It depends on the use you are going to put it to and location'

At home I have broadband, but occasionally test wifi - but only 54G not N

When I visit friends I often find they have N routers so I can get faster connections using an N dongle

I also spend a lot of time traveling, or on a boat so have a 1 watt [High power, with booster aerial] dongle for that, which also does N data rate, and with good long range connectivity

I prefer dongles that use Ralink chipsets, as they seem better supported

Of the 'mainstream' dongles, often supplied with routers, I might surprise some, but I wouldn't buy/use Belkin, as I had no end of trouble, with poor connections and dropouts, but found Linksys to be OK

This is a useful page for anyone asking the same question

http://users.linpro.no/janl/hardware/wifi.html

later info

http://linux-wless.passys.nl/

Aitch :)
Thanks for the links, Aitch.

It occurs to me that a table of what is known to work (and what it takes to make it work), and under which Puppy systems.

Fresh fodder for PLUG.
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]

User avatar
Aitch
Posts: 6518
Joined: Wed 04 Apr 2007, 15:57
Location: Chatham, Kent, UK

#77 Post by Aitch »

I helped Jason do this, quite some time ago

Don't know if it's being maintained?

http://www.murga-linux.com/puppy/viewtopic.php?t=28434

also see

http://www.murga-linux.com/puppy/viewtopic.php?t=47367

I'm trying to get the idea of database access for the forum sold in PLUG thread....there's a lot more than wifi info needs collating

http://www.murga-linux.com/puppy/viewto ... &start=120


Aitch :)

User avatar
RetroTechGuy
Posts: 2947
Joined: Tue 15 Dec 2009, 17:20
Location: USA

#78 Post by RetroTechGuy »

Aitch wrote:I helped Jason do this, quite some time ago

Don't know if it's being maintained?

http://www.murga-linux.com/puppy/viewtopic.php?t=28434

also see

http://www.murga-linux.com/puppy/viewtopic.php?t=47367

I'm trying to get the idea of database access for the forum sold in PLUG thread....there's a lot more than wifi info needs collating

http://www.murga-linux.com/puppy/viewto ... &start=120


Aitch :)
So it appears that this _might_ be a candidate... I don't find anyone using Puppy who has tried it, but it's listed as supported by Linux (and cheap).

http://www.newegg.com/Product/Product.a ... 6833704045

http://linux-wless.passys.nl/query_host ... hostif=USB
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]

User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#79 Post by rjbrewer »

RetroTechGuy wrote:
So it appears that this _might_ be a candidate... I don't find anyone using Puppy who has tried it, but it's listed as supported by Linux (and cheap).
Maybe......maybe not.

http://www.murga-linux.com/puppy/viewtopic.php?t=51804

Also:
Contrary to Aitchs' experience; I have Belkin usb dongle, pcmcia, and
router that work very well, and have had problems with Linksys newer
routers.

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

dagodemon42
Posts: 18
Joined: Sat 04 Jun 2011, 14:06

wireless / wifi cards confirmed to work in puppy

#80 Post by dagodemon42 »

I use this wireless adapter(tp-link tl-wn722n) in PCLOS. It has drivers built in to the newest kernels(2.6.38). It uses the ath9k_htc driver and also needs the firmware. I haven't been able to use it any of the Puppy Derivatives. It gets great reception.

Post Reply