Dpup Exprimo 5.X.15

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#101 Post by pemasu »

Uploading now. I forgot to change default wm as jwm so next version seems to boot into e17.
I had forgotten couple of left over icons to Pinboard in the jwm. Remove them. They are obsolete. I dont know from what cache they are from. Need to chase them down.
I have also changed synclient to use wheezy one. It has better movement support for my touchpad. Might help others. For me touchpad movement slider didnt work over 1.0. Now it works as it should, even to the 10. Dont test. I tried it and had difficulties to get it back.

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#102 Post by pemasu »

Download link for the Dpup Squeeze 5.0.0.3.
http://www.smokey01.com/pemasu/DpupSque ... ze_5.0.0.3

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#103 Post by pemasu »

Before anyone asks. Wm swither in e17 is found under desktop in the Applications menu.

Now I should get familiar with e17 also. Luckily here is whole thread about it. And a lot info and link to the e17 guide in that thread.

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#104 Post by pemasu »

James C. When and if you read this. Could you test if 5003 boot to the 256 RAM. I remember that you had thatkind machine also. From Jurassic. Lol.

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#105 Post by jim3630 »

frugal manual hdd install to ext3. broadom built in wl.ko connects via Frisbee flawlessly as usual. background wallpaper changer didn't work error about pinboard not chosen.

not used e17 so will take some time poking around to do the usual checks.

pemasu did you keep advancecomp and optipng in the devx.sfs? looking good!


------

wm switcher working here and in jwm background changer works.
------
renamed savefile on this install starting with fresh save and pfix=ram.
Last edited by jim3630 on Tue 02 Aug 2011, 23:13, edited 2 times in total.

User avatar
upnorth
Posts: 287
Joined: Mon 11 Jan 2010, 19:32
Location: Wisconsin UTC-6 (-5 DST)
Contact:

#106 Post by upnorth »

Took the upgrade route here on ancient 466 celeron "mendocino" with 256mbytes ram. It went smooth and works snappy :D . Still in openbox i added. Will check e17 later. Looking good..

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#107 Post by James C »

pemasu wrote:James C. When and if you read this. Could you test if 5003 boot to the 256 RAM. I remember that you had thatkind machine also. From Jurassic. Lol.
Burning a cd right now.

There are still a lot of those old boxes being used around the world.No need in getting rid of something that still works. :)

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#108 Post by James C »

James C wrote:
pemasu wrote:James C. When and if you read this. Could you test if 5003 boot to the 256 RAM. I remember that you had thatkind machine also. From Jurassic. Lol.
Burning a cd right now.

There are still a lot of those old boxes being used around the world.No need in getting rid of something that still works. :)
And the answer is yes, 5003 is running live pfix=ram on a 256 mb ram box with the cd unmounted and ejected.

# free
total used free shared buffers
Mem: 253252 247932 5320 0 21092
Swap: 1020092 69732 950360
Total: 1273344 317664 955680
#
Attachments
squeeze 5003 in 256 mb ram.png
(15.52 KiB) Downloaded 857 times

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Dpup Squeeze 5X or Puppy Squeeze or Experimental Squeeze Pup

#109 Post by Billtoo »

I did a manual frugal install of 003.I installed the devx + kernel
source + ati-driver-installer-11-7-x86.x86_64.run.

Tue 2 Aug 2011 Operating System: Puppy Squeeze-5.0.0.3 Linux 2.6.39
5.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility
Radeon HD 4200]
oem: ATI ATOMBIOS product: RS880M 01.00

X Server: Xorg Driver: (II) glx: vendor=FireGL - ATI Technologies Inc.
(II) Module fglrx: vendor=FireGL - ATI Technologies Inc. (II) Module
fglrxdrm: vendor=FireGL - ATI Technologies Inc.
X.Org version: 1.7.7
dimensions: 1024x600 pixels (270x158 millimeters)
depth of root window: 24 planes
AMD Athlon(tm) II Neo K125 Processor
Core 0: 1695 MHz

It is working pretty well after installing the ati driver.
Attachments
mplayerscrn.jpg
(57.05 KiB) Downloaded 830 times

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#110 Post by Jim1911 »

Manual frugal installation of 5.0.0.3 on an ext4 partition. It's working great and I've installed the following applications which all appear to be working fine:

Bibletime_lucid-2.7.2a.sfs
devx_squeeze_5.0.0.3.sfs
jre-1.6u25-i586.sfs
kernel_src-2.6.39-3-patched-lupe28.sfs
LibreOffice-3.4.1_en-US-fixed.sfs
Firefox-6.0 beta Firefox web browser
thunderbird-5.0 Thunderbird Email Client
wine-1.3.25-i486_v2 Wine Windows Program Loader
Acrobat_Reader-9.3.3-Lucid Adobe Acrobat Reader PDF application
BibleAnalysis-4.1.0 Bible study
eSword-9 e-Sword
theWord-3.2.1 theWord
LHP_sys_info-0.5 Lighthouse System Information & Video Report
binutils_2.20.1-16 The GNU assembler, linker and binary utilities
cpp-4.1_4.1.2-29 The GNU C preprocessor
gcc-4.1-base_4.1.2-29 The GNU Compiler Collection (base package)
gcc-4.1_4.1.2-29 The GNU C compiler

Unfortunately, still getting an error message re finding 'ldconfig' when trying to install NVIDIA-Linux-x86-280.13.run. I placed a link to ldconfig in /usr/bin, got error re finding 'ld' which was corrected by installing binutils. Next error re finding 'cc'. Installed gcc but that didn't correct the message so I gave up chasing it.

In any event, it looks fast and solid and your E17 implementation works well. I've mainly just changed some icons and added launchers. Iguleder will have many bugs solved thanks to your efforts.

Cheers,
Jim
Attachments
image-1.jpg
(17.6 KiB) Downloaded 844 times

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#111 Post by James C »

Quick manual frugal install of 5.0.0.3 on my main Linux box. Everything looking good so far.


VIDEO REPORT: Puppy Squeeze, version 5.0.0.3

Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2

Driver used by Xorg:
nv

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video


-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (169MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 02 Aug 2011 08:01:48 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235


# free
total used free shared buffers
Mem: 1033900 386436 647464 0 50764
Swap: 1228936 0 1228936
Total: 2262836 386436 1876400

User avatar
Ray MK
Posts: 774
Joined: Tue 05 Feb 2008, 09:10
Location: UK

#112 Post by Ray MK »

Just got 5.0.0.3 - very impressive

runs very well on my old Acer 243LC laptop with 256mb ram.

Time to sleep now - but tomorrow, have to try this on the new E732 laptop.

Many thanks again pemasu - Super Puppy Maker.

Very best regards - Ray

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#113 Post by James C »

Did a manual frugal install of 5.0.0.3 on the old P3 test box.No problems.


VIDEO REPORT: Puppy Squeeze, version 5.0.0.3

Chip description:
Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub
Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller

Driver used by Xorg:
intel

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video


-Computer-
Processor : Pentium III (Coppermine)
Memory : 253MB (127MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 02 Aug 2011 10:19:17 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH

-Version-
Kernel : Linux 2.6.39 (i686)
Compiled : #1 SMP Fri Jul 15 19:38:53 GMT-8 2011
C Library : GNU C Library version 2.11.2 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
-Current Session-
Computer Name : puppypc
User Name : root (root)
Home Directory : /root
Desktop Environment : Unknown (Window Manager: Enlightenment)

# free
total used free shared buffers
Mem: 253252 242188 11064 0 27432
Swap: 1020092 0 1020092
Total: 1273344 242188 1031156

User avatar
Iguleder
Posts: 2026
Joined: Tue 11 Aug 2009, 09:36
Location: Israel, somewhere in the beautiful desert
Contact:

#114 Post by Iguleder »

Guys, a small request - core bugs that are in the base (that have nothing to do with applications, things like malfunctioning X, CUPS, E17, bugs, etc') - report them in the Puppy Squeeze thread, so we can hunt them down more easily.

It's hard for me and pemasu to follow two threads in parallel :lol:

Thank you!
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]

User avatar
DaveS
Posts: 3685
Joined: Thu 09 Oct 2008, 16:01
Location: UK

#115 Post by DaveS »

03, sound and wifi now working :)
Spup Frugal HD and USB
Root forever!

User avatar
DaveS
Posts: 3685
Joined: Thu 09 Oct 2008, 16:01
Location: UK

#116 Post by DaveS »

Unable to add printer CUPS password required.
Spup Frugal HD and USB
Root forever!

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#117 Post by pemasu »

Dave S. I forgot to change /etc/cups/cupsd.conf or was it cups.conf.
Copy one from any Lucid Puppy and it works. I need to add that configuration file to the zdpup_utilities pet. I have done that fix manually so far and now I forgot to add it.

Well. I will reupload bug fixed version 5003 today later.
Good pick but easily solved. I will fix that obsolete Pinboard icons same time.

Iguleder. I will post my changes to the core functions in your thread when I get feedback that they have fixed the problems.

Now...I need feedback if the PUI (Puppy Universal Installer) works correctly. Does it recognize ntfs, ext2, ext3 and ext4 ok. And can you do Puppy installation to ext4, for example in the usb stick. That is the most tricky part.

Dave S. My hunch was correct. Separate z...sfs is not good thing. It might speed boot time and lessens the RAM usage but...not all network kernel module drivers and firmware will be loaded automatically. I have suspected it before but now I know.
Dave S. If you run dmesg right after boot, can you check is there firmware loading for your wireless. I would like to record that problem for further knowledge.
From this experience, I wont release for generic usage separated sfs anymore.
Something to think about in Spup also.

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#118 Post by jim3630 »

pui recognized ext4 partitions on usb and hdd but unable to recognize squeez sfs file for install. odd symlink errors on desktop. see pic. burn 5003 to dvd then ran pui for usb frugal install ext4, created savefile then reboot.

Faithful Frisbee was unable to complete the wifi connection in the presence of acquired network. see attached. upon rebooting did not recognize previously created savefile and prompted me to create another at which point gave up.
Attachments
s.png
(24.18 KiB) Downloaded 676 times

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#119 Post by pemasu »

Jim3630. Obsolete icon remnants have been explained when I made 5003 announcement. I am reluctant to repeat my posts.

PUI seems to need still more investigation. I will test it also.

Normally I dont use it at all. But if it is in Puplet, it should also work.

Anyway, I will reupload 5003 without those icon remnants and with working cups.conf
And if there is some other bug fix to attain, I will include it also. But no version change if there does not come any real changes.

radky
Posts: 977
Joined: Mon 03 May 2010, 03:13

#120 Post by radky »

The following dialog appears with each launch of Fotoxx.
Attachments
Fotoxx.png
(21.07 KiB) Downloaded 656 times

Post Reply