Slacko Beta 1
Yeah, I have a script that I'm posting fixing woof issues for spup, it includes the rcrsn51 fix (sorry got preoccupied), but maybe you can incorporate some in woof, perhaps not the slacko artwork stuff
EDIT, added more stuff (xcb hack)
EDIT, added more stuff (xcb hack)
- Attachments
-
- woof_slacko_pack-110817-1.tar.gz
- (31.56 KiB) Downloaded 456 times
Last edited by 01micko on Fri 19 Aug 2011, 10:25, edited 1 time in total.
Puppy Linux Blog - contact me for access
..and heres the comments fixed in DISTRO_PKGS_SPECS-slackware-13.37
- Attachments
-
- DISTRO_PKGS_SPECS-slackware-13.37.gz
- (6.18 KiB) Downloaded 442 times
Puppy Linux Blog - contact me for access
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Not woofing that much atm, but I prepared the latest woof and successfully built just the libxcb_base-package, using your fixed-up FIXUPHACK.01micko wrote:MHHP.. in case you are woofing, and for my safe keeping...
xcb_base FIXUPHACK in packages-templates (slacko version)Code: Select all
...
Cheers / MHHP
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
I tried to download the kernel source 2.6.37.6 with slickpet. Ibiblio reported: " Remote file does not exist -- broken link!!!"
I found two other repositories for the sfs-file: http://www.smokey01.com/01micko/pet_packages-spup/ and http://brainwavedesigncentral.net/micko ... ages-spup/. The files appear to be identical, both 95,051,776 bytes.
When I tried to install them, I got an error message claiming that they were in sfs3 format and I should convert them. Not very likely, but why not. The converted files did not run.
Later I found a check sum here: http://murga-linux.com/puppy/viewtopic.php?t=69798. It did not match the check sum of the downloaded files.
I need the kernel sources to compile VirtualBox and would much appreciate a fix.
I found two other repositories for the sfs-file: http://www.smokey01.com/01micko/pet_packages-spup/ and http://brainwavedesigncentral.net/micko ... ages-spup/. The files appear to be identical, both 95,051,776 bytes.
When I tried to install them, I got an error message claiming that they were in sfs3 format and I should convert them. Not very likely, but why not. The converted files did not run.
Later I found a check sum here: http://murga-linux.com/puppy/viewtopic.php?t=69798. It did not match the check sum of the downloaded files.
I need the kernel sources to compile VirtualBox and would much appreciate a fix.
- Iguleder
- Posts: 2026
- Joined: Tue 11 Aug 2009, 09:36
- Location: Israel, somewhere in the beautiful desert
- Contact:
Hey 01micko, I just wrote a new package building tool called Builder (here and a set of build scripts for all my puplet's packages.
This time it's way simpler and lighter than Puppizard ... and it produces PET packages instead of its own format. The packages are automatically stripped and split to EXE, DEV, DOC and NLS.
To rebuild Window Maker (my love!), I created a directory, put the build script there and ran this:
The result is 4 ultra-stripped PETs, in about 10 minutes (after all, it's a git checkout over a slow internet connection, on a netbook ). I rebuilt all my distro's packages in about 20 minutes, which isn't bad at all.
Have you considered putting a Window Maker package in Slickpet? I wrote a really fast menu generator for it in Perl (and I don't even know how to code in Perl ) and I think it could be a nice, lighter alternative to JWM/ROX. Now it's also easier to build it.
This time it's way simpler and lighter than Puppizard ... and it produces PET packages instead of its own format. The packages are automatically stripped and split to EXE, DEV, DOC and NLS.
To rebuild Window Maker (my love!), I created a directory, put the build script there and ran this:
Code: Select all
buildpkg windowmaker-crm.sh
Have you considered putting a Window Maker package in Slickpet? I wrote a really fast menu generator for it in Perl (and I don't even know how to code in Perl ) and I think it could be a nice, lighter alternative to JWM/ROX. Now it's also easier to build it.
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
kernel_sources-2.6.37.6-patched_spup2.sfs is the name of the file
1d29a36c731a19ce30333e0aa5e68349 kernel_sources-2.6.37.6-patched_spup2.sfs <--checksum
http://brainwavedesigncentral.net/micko ... _spup2.sfs
You can try the attached slickpet
1d29a36c731a19ce30333e0aa5e68349 kernel_sources-2.6.37.6-patched_spup2.sfs <--checksum
http://brainwavedesigncentral.net/micko ... _spup2.sfs
You can try the attached slickpet
Puppy Linux Blog - contact me for access
Well, I don't want slickpet to be the focus.. so PPM would be ok.Iguleder wrote: Have you considered putting a Window Maker package in Slickpet? I wrote a really fast menu generator for it in Perl (and I don't even know how to code in Perl ) and I think it could be a nice, lighter alternative to JWM/ROX. Now it's also easier to build it.
Sounds interesting
Puppy Linux Blog - contact me for access
Ok wuwei (and panmar)
I have deduced by random logic that ppp could well be the culprit... we are using the slackware binary, working fine with wireless modems but I don't know where else to look, (not without that HW to test)
Try the Wary pet with original rp-ppoe..
ppp <-- http://distro.ibiblio.org/quirky/pet_pa ... 4.4-w5.pet
(only replace if you used the slackware version I posted on the previous page)
rp-pppoe <-- http://distro.ibiblio.org/quirky/pet_pa ... 2-2-p4.pet
Keeping the faith..
I have deduced by random logic that ppp could well be the culprit... we are using the slackware binary, working fine with wireless modems but I don't know where else to look, (not without that HW to test)
Try the Wary pet with original rp-ppoe..
ppp <-- http://distro.ibiblio.org/quirky/pet_pa ... 4.4-w5.pet
(only replace if you used the slackware version I posted on the previous page)
rp-pppoe <-- http://distro.ibiblio.org/quirky/pet_pa ... 2-2-p4.pet
Keeping the faith..
Puppy Linux Blog - contact me for access
SUCCESS! sort of....
Your fixes didn't work on the existing pupsave file.
Then with pfix=ram I tried ppp-2.4.4-w5.pet. Setup pppoe from scratch. No success.
Again pfix=ram, copied DISTRO_PKGS_SPECS-slackware-13.37 to .packages and installed rp_pppoe_cli-3.8-patched2-2-p4.pet. Setup pppoe from scratch. No success.
Then I recalled a somewhat far fetched solution of earlier Puppies:
Using fixed DNS, rather than dynamic DNS.
So after a new pppoe setup with fixed primary and secondary DNS, boom the internet connected.
This detour hasn't been necessary for a lot of Puppies in a long time, but if it helps now, why not.
So far so good, although I don't know how much your fixes contributed and how much the fixed DNS.
Anyway, now with internet up and running, I can do some more testing.
Thanks 01micko!
Your fixes didn't work on the existing pupsave file.
Then with pfix=ram I tried ppp-2.4.4-w5.pet. Setup pppoe from scratch. No success.
Again pfix=ram, copied DISTRO_PKGS_SPECS-slackware-13.37 to .packages and installed rp_pppoe_cli-3.8-patched2-2-p4.pet. Setup pppoe from scratch. No success.
Then I recalled a somewhat far fetched solution of earlier Puppies:
Using fixed DNS, rather than dynamic DNS.
So after a new pppoe setup with fixed primary and secondary DNS, boom the internet connected.
This detour hasn't been necessary for a lot of Puppies in a long time, but if it helps now, why not.
So far so good, although I don't know how much your fixes contributed and how much the fixed DNS.
Anyway, now with internet up and running, I can do some more testing.
Thanks 01micko!
ok.. I just compiled ff-6.0.. it's still smoking..
The pet is 14M and I linked all the puppy internals to it in pinstall.sh..
so (do we use it as default? [bear in mind we lose an important function.. composer])... sylpheed is about 600-800k.. Seamonkey 17M.. we save about 2 meg.. that would put the iso under 120M and please many, many users at no end.. (I prefer SeaMonkey.. but what do I know?). I compiled FF with it's internal nss and nspr, so should be up to date with security. I'm yet to test pfix=ram because to compile I had to install, mesa, glew.. it should still at least run. More tomorrow...
mozconfig <--
fairly conservative
The pet is 14M and I linked all the puppy internals to it in pinstall.sh..
so (do we use it as default? [bear in mind we lose an important function.. composer])... sylpheed is about 600-800k.. Seamonkey 17M.. we save about 2 meg.. that would put the iso under 120M and please many, many users at no end.. (I prefer SeaMonkey.. but what do I know?). I compiled FF with it's internal nss and nspr, so should be up to date with security. I'm yet to test pfix=ram because to compile I had to install, mesa, glew.. it should still at least run. More tomorrow...
mozconfig <--
Code: Select all
. $topsrcdir/browser/config/mozconfig
mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/objdir-ff-release
mk_add_options MOZ_MAKE_FLAGS="-j4"
ac_add_options --disable-libjpeg-turbo
ac_add_options --enable-system-hunspell
ac_add_options --localstatedir=/var
ac_add_options --sysconfdir=/etc
ac_add_options --prefix=/usr
ac_add_options --host=i486-pc-linux-gnu
ac_add_options --enable-system-cairo
ac_add_options --enable-strip
ac_add_options --with-system-jpeg
ac_add_options --with-system-zlib
ac_add_options --enable-default-toolkit=cairo-gtk2
# make -f client.mk
# cd objdir-ff-release
# make package #...makes tarball in dist
#TODO, make dev package
Last edited by 01micko on Fri 19 Aug 2011, 13:02, edited 1 time in total.
Puppy Linux Blog - contact me for access
Desktop Res
Spup-312.37 let me probe and select my screen resolution of 1440x900 in xorg, beautiful desktop!
Slacko-4.99.1 Lets me probe and select 1440x900 from list but... when it loads, it auto puts me in 'versa' instead of xorg with a resolution of 1224x1224. I select the xorg feature it suggests after that, again, probe, select 1440x900, again gives me only 1224x1224 with no 1440x900 option.
This makes the screen way to large for monitor and desktop icons (top ones) are half hid 'off screen'.
>>>---Indian------>
Slacko-4.99.1 Lets me probe and select 1440x900 from list but... when it loads, it auto puts me in 'versa' instead of xorg with a resolution of 1224x1224. I select the xorg feature it suggests after that, again, probe, select 1440x900, again gives me only 1224x1224 with no 1440x900 option.
This makes the screen way to large for monitor and desktop icons (top ones) are half hid 'off screen'.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
indian.. it's most likely xcb.. search PPM for it, install it restart X, It was an oversight when converting from last woof, sorry!..
______________
Firefox-Aurora-6 .. http://brainwavedesigncentral.net/micko ... 0-spup.pet
You may need xcb, tetsed pfix=ram, xcb installed, flash ok
xcb <-- http://mirror.aarnet.edu.au/pub/slackwa ... i486-1.txz
______________
Firefox-Aurora-6 .. http://brainwavedesigncentral.net/micko ... 0-spup.pet
You may need xcb, tetsed pfix=ram, xcb installed, flash ok
xcb <-- http://mirror.aarnet.edu.au/pub/slackwa ... i486-1.txz
Puppy Linux Blog - contact me for access
1st test running 24hours OK
Removed by GCMartin
Last edited by gcmartin on Fri 19 Aug 2011, 17:17, edited 1 time in total.
@01micko,
yet another puzzle.
Wanted to remove the package with the red arrow. Now PPM is sitting there for the last half hour with the white window and nothing moves.
Any idea, other than to restart the pupsave file from scratch?
++++++++++++++
Sorry, found the answer myself:
Renaming DISTRO_PKGS_SPECS-slackware-13.37 in /root/.packages to DISTRO_PKGS_SPECS fixes it.
yet another puzzle.
Wanted to remove the package with the red arrow. Now PPM is sitting there for the last half hour with the white window and nothing moves.
Any idea, other than to restart the pupsave file from scratch?
++++++++++++++
Sorry, found the answer myself:
Renaming DISTRO_PKGS_SPECS-slackware-13.37 in /root/.packages to DISTRO_PKGS_SPECS fixes it.
- Attachments
-
- delete.jpg
- (63.93 KiB) Downloaded 424 times
Probably not. FF is rapidly going out of favour, partly due to its bloat partly due to incompatibilities, etc.so (do we use it as default? [bear in mind we lose an important function.. composer]
Opera is 'better' in terms of speed, but doesn't save much space and some folks have trouble navigating its extensive options. There used to be Flash issues, too, and its internal mailer is rubbish. Still worth a punt though, especially with Claws mail or EudoraOSE, but the bytes count rises, of course. Increasing in favour is Midori, but I think that might be relatively bloated considering its modest capabilities? Didn't Jemimah settle on Midori? What was her reasoning? Any chance someone could port something (other than Chrome/Iron) from the world of tablets and mobiles?
Google Chrome 13 for testing. One can turn off some of the "features" that some people regard as intrusive in Preferences.
http://distro.ibiblio.org/puppylinux/pe ... 82.112.pet
http://distro.ibiblio.org/puppylinux/pe ... 82.112.pet
Iron 13 for testing. Iron is built from the same Chromium source code as Google Chrome by srware.net but with the intrusive aspects removed, so they say.
http://distro.ibiblio.org/puppylinux/pe ... .800.0.pet
http://distro.ibiblio.org/puppylinux/pe ... .800.0.pet
http://distro.ibiblio.org/puppylinux/pe ... 82.112.pet
http://distro.ibiblio.org/puppylinux/pe ... 82.112.pet
Iron 13 for testing. Iron is built from the same Chromium source code as Google Chrome by srware.net but with the intrusive aspects removed, so they say.
http://distro.ibiblio.org/puppylinux/pe ... .800.0.pet
http://distro.ibiblio.org/puppylinux/pe ... .800.0.pet
I vote for Seamonkey 2.3. It is faster than FF 5.0.1 and probably just as fast as FF 6.0. Slacko seems to me kind of a "purist" Puppy and that says Seamonkey to me. (Purist, you know, without being all tarted up like another version I could mention.)do we use it (FF6) as default?
Last edited by playdayz on Fri 19 Aug 2011, 16:13, edited 5 times in total.
The launch signal in the latest gtkdialog crashes the gui if there exist a menu widgets.This makes apps like pTiming useless.
More here
Sigmund
More here
Sigmund