Unable to open file /var/spool/cups/d00005-001 ??
Unable to open file /var/spool/cups/d00005-001 ??
I am running Puppy 4, CUPS 1.3.3 and trying to print wirelessly to a Canon MX860. Setup sees the printer to select and the driver to select. When I try to print a test page, I get the error message with a Permission Denied. I can go to that directory and see the file. It is the test print page. Under permissions says "rw-, r--,---/--- root......whatever that means. How can I correct?
This is the log:
I [11/Jun/2010:23:44:30 -0800] Scheduler shutting down normally.
I [11/Jun/2010:23:44:30 -0800] Saving job cache file "/var/cache/cups/job.cache"...
I [11/Jun/2010:23:45:22 -0800] Listening to 127.0.0.1:631 (IPv4)
I [11/Jun/2010:23:45:22 -0800] Listening to /var/run/cups/cups.sock (Domain)
I [11/Jun/2010:23:45:22 -0800] Loaded configuration file "/etc/cups/cupsd.conf"
I [11/Jun/2010:23:45:22 -0800] Using default TempDir of /var/spool/cups/tmp...
I [11/Jun/2010:23:45:22 -0800] Configured for up to 100 clients.
I [11/Jun/2010:23:45:22 -0800] Allowing up to 100 client connections per host.
I [11/Jun/2010:23:45:22 -0800] Using policy "default" as the default!
I [11/Jun/2010:23:45:22 -0800] Full reload is required.
I [11/Jun/2010:23:45:22 -0800] Loaded MIME database from '/etc/cups': 35 types, 38 filters...
I [11/Jun/2010:23:45:22 -0800] Loading job cache file "/var/cache/cups/job.cache"...
E [11/Jun/2010:23:45:22 -0800] [Job 4] Unable to queue job for destination "MX860"!
I [11/Jun/2010:23:45:22 -0800] Full reload complete.
I [11/Jun/2010:23:45:22 -0800] Cleaning out old temporary files in "/var/spool/cups/tmp"...
I [11/Jun/2010:23:45:22 -0800] Listening to 127.0.0.1:631 on fd 1...
I [11/Jun/2010:23:45:22 -0800] Listening to /var/run/cups/cups.sock on fd 3...
I [11/Jun/2010:23:45:22 -0800] Resuming new connection processing...
I [11/Jun/2010:23:45:28 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=17993)
I [11/Jun/2010:23:45:43 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18180)
I [11/Jun/2010:23:45:43 -0800] Started "/usr/lib/cups/daemon/cups-deviced" (pid=18181)
I [11/Jun/2010:23:45:53 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18291)
I [11/Jun/2010:23:45:53 -0800] Started "/usr/lib/cups/daemon/cups-driverd" (pid=18292)
E [11/Jun/2010:23:45:53 -0800] [cups-driverd] Unable to open PPD directory "/usr/local/share/ppd": No such file or directory
E [11/Jun/2010:23:45:53 -0800] [cups-driverd] Unable to open PPD directory "/opt/share/ppd": No such file or directory
I [11/Jun/2010:23:46:02 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18428)
E [11/Jun/2010:23:46:02 -0800] CUPS-Add-Modify-Printer: Unauthorized
I [11/Jun/2010:23:46:11 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18521)
E [11/Jun/2010:23:46:11 -0800] CUPS-Add-Modify-Printer: Unauthorized
I [11/Jun/2010:23:46:11 -0800] Setting MX860 device-uri to "bjnp://192.168.1.15:8611" (was "file:/dev/null".)
I [11/Jun/2010:23:46:11 -0800] Setting MX860 printer-is-accepting-jobs to 1 (was 0.)
I [11/Jun/2010:23:46:11 -0800] Setting MX860 printer-state to 3 (was 5.)
I [11/Jun/2010:23:46:11 -0800] Saving printers.conf...
I [11/Jun/2010:23:46:11 -0800] New printer "MX860" added by "root".
I [11/Jun/2010:23:46:17 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18572)
E [11/Jun/2010:23:46:17 -0800] PID 18572 (/usr/lib/cups/cgi-bin/admin.cgi) crashed on signal 11!
I [11/Jun/2010:23:46:17 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
I [11/Jun/2010:23:46:25 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18665)
I [11/Jun/2010:23:46:30 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18712)
I [11/Jun/2010:23:46:30 -0800] [Job 5] Adding start banner page "none".
I [11/Jun/2010:23:46:30 -0800] [Job 5] Adding job file of type application/postscript.
I [11/Jun/2010:23:46:30 -0800] [Job 5] Adding end banner page "none".
I [11/Jun/2010:23:46:30 -0800] [Job 5] Queued on "MX860" by "root".
I [11/Jun/2010:23:46:30 -0800] [Job 5] Started filter /usr/lib/cups/filter/pstops (PID 18713)
I [11/Jun/2010:23:46:30 -0800] [Job 5] Started filter /usr/lib/cups/filter/pstocanonij (PID 18714)
I [11/Jun/2010:23:46:30 -0800] [Job 5] Started backend /usr/lib/cups/backend/bjnp (PID 18715)
E [11/Jun/2010:23:46:30 -0800] PID 18713 (/usr/lib/cups/filter/pstops) stopped with status 1!
I [11/Jun/2010:23:46:30 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
E [11/Jun/2010:23:46:30 -0800] [Job 5] Unable to open file "/var/spool/cups/d00005-001" - Permission denied
I [11/Jun/2010:23:46:32 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18762)
E [11/Jun/2010:23:46:32 -0800] [Job 4] Unable to open job control file "/var/spool/cups/c00004" - No such file or directory!
I [11/Jun/2010:23:46:43 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18858)
E [11/Jun/2010:23:46:43 -0800] [Job 4] Unable to open job control file "/var/spool/cups/c00004" - No such file or directory!
E [11/Jun/2010:23:46:48 -0800] [Job 5] Job stopped due to filter errors.
I [11/Jun/2010:23:46:53 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18998)
E [11/Jun/2010:23:46:53 -0800] [Job 4] Unable to open job control file "/var/spool/cups/c00004" - No such file or directory!
This is the log:
I [11/Jun/2010:23:44:30 -0800] Scheduler shutting down normally.
I [11/Jun/2010:23:44:30 -0800] Saving job cache file "/var/cache/cups/job.cache"...
I [11/Jun/2010:23:45:22 -0800] Listening to 127.0.0.1:631 (IPv4)
I [11/Jun/2010:23:45:22 -0800] Listening to /var/run/cups/cups.sock (Domain)
I [11/Jun/2010:23:45:22 -0800] Loaded configuration file "/etc/cups/cupsd.conf"
I [11/Jun/2010:23:45:22 -0800] Using default TempDir of /var/spool/cups/tmp...
I [11/Jun/2010:23:45:22 -0800] Configured for up to 100 clients.
I [11/Jun/2010:23:45:22 -0800] Allowing up to 100 client connections per host.
I [11/Jun/2010:23:45:22 -0800] Using policy "default" as the default!
I [11/Jun/2010:23:45:22 -0800] Full reload is required.
I [11/Jun/2010:23:45:22 -0800] Loaded MIME database from '/etc/cups': 35 types, 38 filters...
I [11/Jun/2010:23:45:22 -0800] Loading job cache file "/var/cache/cups/job.cache"...
E [11/Jun/2010:23:45:22 -0800] [Job 4] Unable to queue job for destination "MX860"!
I [11/Jun/2010:23:45:22 -0800] Full reload complete.
I [11/Jun/2010:23:45:22 -0800] Cleaning out old temporary files in "/var/spool/cups/tmp"...
I [11/Jun/2010:23:45:22 -0800] Listening to 127.0.0.1:631 on fd 1...
I [11/Jun/2010:23:45:22 -0800] Listening to /var/run/cups/cups.sock on fd 3...
I [11/Jun/2010:23:45:22 -0800] Resuming new connection processing...
I [11/Jun/2010:23:45:28 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=17993)
I [11/Jun/2010:23:45:43 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18180)
I [11/Jun/2010:23:45:43 -0800] Started "/usr/lib/cups/daemon/cups-deviced" (pid=18181)
I [11/Jun/2010:23:45:53 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18291)
I [11/Jun/2010:23:45:53 -0800] Started "/usr/lib/cups/daemon/cups-driverd" (pid=18292)
E [11/Jun/2010:23:45:53 -0800] [cups-driverd] Unable to open PPD directory "/usr/local/share/ppd": No such file or directory
E [11/Jun/2010:23:45:53 -0800] [cups-driverd] Unable to open PPD directory "/opt/share/ppd": No such file or directory
I [11/Jun/2010:23:46:02 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18428)
E [11/Jun/2010:23:46:02 -0800] CUPS-Add-Modify-Printer: Unauthorized
I [11/Jun/2010:23:46:11 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18521)
E [11/Jun/2010:23:46:11 -0800] CUPS-Add-Modify-Printer: Unauthorized
I [11/Jun/2010:23:46:11 -0800] Setting MX860 device-uri to "bjnp://192.168.1.15:8611" (was "file:/dev/null".)
I [11/Jun/2010:23:46:11 -0800] Setting MX860 printer-is-accepting-jobs to 1 (was 0.)
I [11/Jun/2010:23:46:11 -0800] Setting MX860 printer-state to 3 (was 5.)
I [11/Jun/2010:23:46:11 -0800] Saving printers.conf...
I [11/Jun/2010:23:46:11 -0800] New printer "MX860" added by "root".
I [11/Jun/2010:23:46:17 -0800] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=18572)
E [11/Jun/2010:23:46:17 -0800] PID 18572 (/usr/lib/cups/cgi-bin/admin.cgi) crashed on signal 11!
I [11/Jun/2010:23:46:17 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
I [11/Jun/2010:23:46:25 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18665)
I [11/Jun/2010:23:46:30 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18712)
I [11/Jun/2010:23:46:30 -0800] [Job 5] Adding start banner page "none".
I [11/Jun/2010:23:46:30 -0800] [Job 5] Adding job file of type application/postscript.
I [11/Jun/2010:23:46:30 -0800] [Job 5] Adding end banner page "none".
I [11/Jun/2010:23:46:30 -0800] [Job 5] Queued on "MX860" by "root".
I [11/Jun/2010:23:46:30 -0800] [Job 5] Started filter /usr/lib/cups/filter/pstops (PID 18713)
I [11/Jun/2010:23:46:30 -0800] [Job 5] Started filter /usr/lib/cups/filter/pstocanonij (PID 18714)
I [11/Jun/2010:23:46:30 -0800] [Job 5] Started backend /usr/lib/cups/backend/bjnp (PID 18715)
E [11/Jun/2010:23:46:30 -0800] PID 18713 (/usr/lib/cups/filter/pstops) stopped with status 1!
I [11/Jun/2010:23:46:30 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
E [11/Jun/2010:23:46:30 -0800] [Job 5] Unable to open file "/var/spool/cups/d00005-001" - Permission denied
I [11/Jun/2010:23:46:32 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18762)
E [11/Jun/2010:23:46:32 -0800] [Job 4] Unable to open job control file "/var/spool/cups/c00004" - No such file or directory!
I [11/Jun/2010:23:46:43 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18858)
E [11/Jun/2010:23:46:43 -0800] [Job 4] Unable to open job control file "/var/spool/cups/c00004" - No such file or directory!
E [11/Jun/2010:23:46:48 -0800] [Job 5] Job stopped due to filter errors.
I [11/Jun/2010:23:46:53 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=18998)
E [11/Jun/2010:23:46:53 -0800] [Job 4] Unable to open job control file "/var/spool/cups/c00004" - No such file or directory!
Under help, it shows Puppy 4.3. Is 4.3.1 much different? Do I need to upgrade?
I completed the instructions but get the same result. The file properties are attached.
I just realized one other thing. The hard drive is dead so I'm booting from a DVD with pupsave on the USB. The BOIs does not have an option to boot from the USB. Does that make a difference?
Thanks for your help,
Dan
I completed the instructions but get the same result. The file properties are attached.
I just realized one other thing. The hard drive is dead so I'm booting from a DVD with pupsave on the USB. The BOIs does not have an option to boot from the USB. Does that make a difference?
Thanks for your help,
Dan
It may. Try the following commandsmcman56 wrote:The hard drive is dead so I'm booting from a DVD with pupsave on the USB.
Code: Select all
/etc/init.d/cups stop
rm -rf /var/cups
rm -rf /var/spool/cups
rm -rf /var/run/cups
rm -rf /var/cache/cups
rm -rf /var/log/cups
/etc/init.d/cups start
I just did a fresh install of Puppy 4.3.1 and upgraded the CUPS to 1.3.11 as per the instructions. I then did a simulated install of your Canon MX860 and it worked fine.
There have been other episodes where CUPS 1.3.x showed strange behaviours with USB installs. Maybe that's what you are seeing. Or maybe there are some left-over bits of the CUPS 1.3.3 install that are causing the problem.
If your hardware will run it, I would get Quirky 1.2. It has CUPS 1.3.11 built in, so the printer setup may be easier to do.
There have been other episodes where CUPS 1.3.x showed strange behaviours with USB installs. Maybe that's what you are seeing. Or maybe there are some left-over bits of the CUPS 1.3.3 install that are causing the problem.
If your hardware will run it, I would get Quirky 1.2. It has CUPS 1.3.11 built in, so the printer setup may be easier to do.
Well, I have learned a little more. At first, 4.3.1 will work and print correctly. Over time...maybe very soon, it looses that ability and the fault shows up. It was not related to the pdf load. Maybe something happens when it is saved or ???. Quirky was similar. It set up OK and printed but then cups would not open to let me try again...local host could not be found. In Quirky, seamonkey will also just disappear. It does not lock up but is just instantly gone. I had some other version of puppy that did that too.
Issue Resolved!!!
After trying Quirky, I went one step further to Lucid. It comes with CUPS 1.4.2. After several days, printing is still working fine and has not developed the fault. The only odd thing I notice is that the two green lights on the Netgear wireless adapter keep blinking like it is in some kind of fault mode. However, it is working fine.
Hey mcman56,
It's been a few months and just wanted to see if printing was still okay using Quirky?
I am experiencing the same problem using Puppy 4.3.1 and my Samsung SCX-4100 printer. I may get it to work for the first time (now I can't even reproduce that), but then over time, it fails to print.
I've tried Lucid and printing works flawlessly, however at the expense of an application that seems to only work in 4.3.1 (I'll post this issue elsewhere).
Cheers.
It's been a few months and just wanted to see if printing was still okay using Quirky?
I am experiencing the same problem using Puppy 4.3.1 and my Samsung SCX-4100 printer. I may get it to work for the first time (now I can't even reproduce that), but then over time, it fails to print.
I've tried Lucid and printing works flawlessly, however at the expense of an application that seems to only work in 4.3.1 (I'll post this issue elsewhere).
Cheers.
Lucid solved my printing issue so I simply stuck with Lucid. However, several of the web browsers had scrolling issues running in Lucid. I ended up with Chromium and it works well.
Using the tool in Lucid, it also seemed easier to to load Openoffice. However, I tried using the ATAN function in the spreadsheet yesterday and it did not work. It offered the function but the result was just the initial number. I'm wondering if there is an additional step to get all of the trig functions. I guess that is something to look into.
Dan
Using the tool in Lucid, it also seemed easier to to load Openoffice. However, I tried using the ATAN function in the spreadsheet yesterday and it did not work. It offered the function but the result was just the initial number. I'm wondering if there is an additional step to get all of the trig functions. I guess that is something to look into.
Dan
I had the same problem with my HPf4580, Puppy 4.20.
Although i removed the folders suggested (/var/cups, /var/spool/cups, /var/run/cups, /var/cache/cups, /var/log/cups), i was still not able to print, getting the same error:
Unable to open file /var/spool/cups/dXXX-XXX: Permission denied.
I noticed from /var/log/cups/error_log that it had something to do with the filter pstops.
The solution was to change the permissions of the filters:
[/code]
Although i removed the folders suggested (/var/cups, /var/spool/cups, /var/run/cups, /var/cache/cups, /var/log/cups), i was still not able to print, getting the same error:
Unable to open file /var/spool/cups/dXXX-XXX: Permission denied.
I noticed from /var/log/cups/error_log that it had something to do with the filter pstops.
Code: Select all
PID 18713 (/usr/lib/cups/filter/pstops) stopped with status 1!
Code: Select all
cd /usr/lib/cups/filter
chmod ug+s pstops
chmod ug+s foomatic-rip
Here is something that we have learned about Puppy and CUPS. Certain alien packages, like debs or sfs files made from debs, have invalid permissions and ownerships. When installed, they alter the Puppy filesystem and cause CUPS to fail.
This might explain why CUPS would initially work for mcman56, then eventually quit. It might also explain why your use of the "-s" option would repair the problem.
Thanks.
This might explain why CUPS would initially work for mcman56, then eventually quit. It might also explain why your use of the "-s" option would repair the problem.
Thanks.