Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 30 Sep 2014, 06:29
All times are UTC - 4
 Forum index » House Training » Users ( For the regulars )
Smartlink pci modem setup error, "no irq assigned"
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 1 [12 Posts]  
Author Message
macabre222

Joined: 25 Jun 2005
Posts: 2
Location: pa

PostPosted: Sat 25 Jun 2005, 22:00    Post subject:  Smartlink pci modem setup error, "no irq assigned"  

so far slax,knoppix,ubuntu or dsl cannot detect my modem at all, but
puppy can.. when i run the modem wizard it says it has found a pci modem ...ali corperation...smartlink 56k modem.
and thats what i got but when i try to activate it, i get an error that says..
there is no irq assigned..and it wont work

i realy like puppy linux and i have faith that someone will help me get it to work,,right now im typing this up in stupid xp and the popups are killin me
pleeeeease help.

kevin michael myers

_________________
Im not the baddest man alive...until i get the one who is.. Smile
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger 
Flash
Official Dog Handler


Joined: 04 May 2005
Posts: 11079
Location: Arizona USA

PostPosted: Sun 26 Jun 2005, 14:38    Post subject:  

It might help if you told us more about your hardware. I.e., laptop or desktop, brand and model. Also, motherboard, chipset, etc., if known.
Back to top
View user's profile Send private message 
dr1445

Joined: 26 Jun 2005
Posts: 4
Location: CT USA

PostPosted: Sun 26 Jun 2005, 15:42    Post subject: smartlink  

There is a puppyget for the smartlink modem. I have not been able to get it to install correctly, maybe you will have better luck. i get an error in the usr/sbin/slmodem, a big red error! i use an Amigo AME-CA95 serial modem, that works great on almost all linux. it's around $24 over at the newegg website. i am using the amigo now with puppy firefox. no problems, hooked up the first time.
regards
Dave newuser
Back to top
View user's profile Send private message 
BarryK
Puppy Master


Joined: 09 May 2005
Posts: 7047
Location: Perth, Western Australia

PostPosted: Sun 26 Jun 2005, 20:38    Post subject:  

The Smartlink PupGet is for the 2.6 kernel -- I think it says so in the package name.

If I recall rightly, 1.0.3 has everything already installed for using Smartlink modems.
The "Setup -> Get package extensions" does have a pkg for Smartlink but I think that stuff is already in 1.0.3

-- note, I have tidied this up for 1.0.4.
but, can't actually test anything as don't have a smartlink modem.
Back to top
View user's profile Send private message Visit poster's website 
macabre222

Joined: 25 Jun 2005
Posts: 2
Location: pa

PostPosted: Mon 27 Jun 2005, 20:54    Post subject: Sorry for not writing more about my specs  

here are my specs that i got from directx in windows



------------------
System Information
------------------
Time of this report: 6/27/2005, 18:13:24
Machine name: BOXY
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: Product Name
BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 2.60GHz
Memory: 248MB RAM
Page File: 127MB used, 479MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

-------------
Sound Devices
-------------
Description: Realtek AC97 Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_8086&DEV_24C5&SUBSYS_90551509&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: ALCXWDM.SYS
Driver Version: 5.10.0000.5170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 4/1/2003 17:51:30, 719052 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 48000
Static/Strm HW Mix Bufs: 17, 16
Static/Strm HW 3D Bufs: 17, 16
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run

Description: Modem #1 Line Playback (emulated)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID:
Manufacturer ID: 1
Product ID: 81
Type: Emulated
Driver Name:
Driver Version:
Driver Attributes:
WHQL Logo'd:
Date and Size:
Other Files:
Driver Provider:
HW Accel Level: Full
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run


Description: Modem #1 Line Record (emulated)
Default Sound Capture: No
Default Voice Capture: No
Driver Name:
Driver Version:
Driver Attributes:
Date and Size:
Cap Flags: 0x20
Format Flags: 0x0

-------------------
DirectInput Devices
-------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Poll w/ Interrupt: No
Registry: OK

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x24C7
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:44, 57600 bytes
| Driver: usbd.sys, 8/29/2002 05:00:00, 4736 bytes

----------------
Gameport Devices
----------------

------------
PS/2 Devices
------------
+ Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 23:14:38, 52736 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:34, 24576 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:01:08, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:34, 24576 bytes
|
+ PS/2 Compatible Mouse
| Matching Device ID: *pnp0f13
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 23:14:38, 52736 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:34, 23040 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:01:08, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:34, 23040 bytes

------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C:
Free Space: 33.7 GB
Total Space: 39.9 GB
File System: NTFS
Model: WDC WD800EB-11DJF0

Drive: D:
Model: JLMS XJ-HD166S
Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:54, 49536 bytes

Drive: E:
Model: _NEC DVD_RW ND-1300A
Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:54, 49536 bytes

--------------
System Devices
--------------
Name: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Device ID: PCI\VEN_8086&DEV_2562&SUBSYS_90551509&REV_03\3&13C0B0C5&0&10


Name: Intel(R) 82845G/GL/GE/PE/GV Processor to I/O Controller - 2560
Device ID: PCI\VEN_8086&DEV_2560&SUBSYS_00000000&REV_03\3&13C0B0C5&0&00


Name: Intel(r) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
Device ID: PCI\VEN_8086&DEV_24CD&SUBSYS_90551509&REV_02\3&13C0B0C5&0&EF


Name: Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Device ID: PCI\VEN_8086&DEV_24CB&SUBSYS_90551509&REV_02\3&13C0B0C5&0&F9


Name: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
Device ID: PCI\VEN_8086&DEV_24C7&SUBSYS_90551509&REV_02\3&13C0B0C5&0&EA


Name: Realtek AC'97 Audio
Device ID: PCI\VEN_8086&DEV_24C5&SUBSYS_90551509&REV_02\3&13C0B0C5&0&FD


Name: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
Device ID: PCI\VEN_8086&DEV_24C4&SUBSYS_90551509&REV_02\3&13C0B0C5&0&E9


Name: Intel(R) 82801DB/DBM SMBus Controller - 24C3
Device ID: PCI\VEN_8086&DEV_24C3&SUBSYS_90551509&REV_02\3&13C0B0C5&0&FB


Name: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
Device ID: PCI\VEN_8086&DEV_24C2&SUBSYS_90551509&REV_02\3&13C0B0C5&0&E8


Name: Intel(R) 82801DB LPC Interface Controller - 24C0
Device ID: PCI\VEN_8086&DEV_24C0&SUBSYS_00000000&REV_02\3&13C0B0C5&0&F8


Name: Intel(R) 82801DB PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_82\3&13C0B0C5&0&F0


Name: 56Kbps Internal Modem
Device ID: PCI\VEN_10B9&DEV_5459&SUBSYS_910014FE&REV_00\4&1A671D0C&0&08F0
Driver: C:\WINDOWS\System32\Drivers\mtlmnt5.sys, 3.20.0004.0000 (English), 2/16/2003 16:08:00, 210128 bytes
Driver: C:\WINDOWS\System32\Drivers\mtlstrm.sys, 3.20.0004.0000 (English), 2/16/2003 17:33:00, 1293192 bytes
Driver: C:\WINDOWS\System32\Drivers\slnthal.sys, 3.20.0004.0000 (English), 2/16/2003 16:12:00, 85520 bytes
Driver: C:\WINDOWS\System32\Drivers\ntmtlfax.sys, 3.20.0003.0000 (English), 2/5/2003 17:25:00, 162136 bytes
Driver: C:\WINDOWS\System32\Drivers\slntamr.sys, 3.20.0004.0000 (English), 2/16/2003 16:11:00, 516616 bytes
Driver: C:\WINDOWS\System32\Drivers\slwdmsup.sys, 4.00.0001.0001 (English), 1/17/2003 01:19:00, 39348 bytes
Driver: C:\WINDOWS\slrundll.exe, 1/17/2003 01:47:00, 24576 bytes
Driver: C:\WINDOWS\system32\SLGen.dll, 1/17/2003 02:01:00, 159744 bytes
Driver: C:\WINDOWS\system32\coinst.dll, 1.00.0000.0001 (English), 1/17/2003 02:09:00, 49152 bytes
Driver: C:\WINDOWS\system32\slserv.exe, 1.00.0000.0001 (English), 1/17/2003 02:02:00, 45056 bytes
Driver: C:\WINDOWS\system32\slextspk.dll, 1.00.0000.0001 (English), 1/17/2003 02:10:00, 188416 bytes

_________________
Im not the baddest man alive...until i get the one who is.. Smile
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger 
abc
Guest


PostPosted: Mon 04 Jul 2005, 22:21    Post subject:  

The error message seems to be garbage. I get it too and I have a generic slmodem card. with an Intel chipset board. Check /dev/ttySL0, and it should exist. However gtkdial never ever works ever ever ever. I can dial with eznet and it tries to authenticate. So, the modem works despite the IRQ error mesage.

Is there anything that can be used instead of gkdial. I have years and years of failure with it, on different distributions and different machines. It has NEVER EVER worked. Kind of pisses you off when that happens.
Back to top
BarryK
Puppy Master


Joined: 09 May 2005
Posts: 7047
Location: Perth, Western Australia

PostPosted: Tue 05 Jul 2005, 08:03    Post subject:  

...hmm, interesting. I use Gkdial on a range of different machines and modems, works well for me.
I think though, the key to your problem may be the modem initialisation string -- as I recall, the initialisation string in the original source package didn't work for me, so I changed it, but it still needs to be tweaked for some modems.

I have put some more info about this into the Internet Howto help page for Pup 1.0.4. Also, the program wvdialconfig can help to obtain the best initialisation string -- do a search of this forum or the wiki for more info.

Right now, I'm using an old external serial modem that I bought for A$5 at a swap-meet, and I set the initialisation string to just "ATZ", works like a charm with Gkdial.
Back to top
View user's profile Send private message Visit poster's website 
BarryK
Puppy Master


Joined: 09 May 2005
Posts: 7047
Location: Perth, Western Australia

PostPosted: Tue 05 Jul 2005, 08:06    Post subject:  

Oh yes, Pup 1.0.3 also has the wvdial program that can be used to dialup, but you will need to read the docs on wvdial and wvdialconfig, in /usr/share/doc/wvdial-1.42/.
Back to top
View user's profile Send private message Visit poster's website 
abc
Guest


PostPosted: Tue 05 Jul 2005, 19:09    Post subject:  

I want my sister to use this. Her experience goes to the extent of reaping Outlook consequences despite all that I have said. There is no way she will ever get to the stage of altering a modem control string.
I also have an old serial modem, but that is not going to help, we live in different countries.
I have also tried Motorola and other external modems with gkdial.. Believe me, it is an absolute disaster here is my control string :
"ATZw S0=0 S7=45 &c1 E1 L1 M2 Q0 V1 X4"
The w is so it politely drops out if someone is already talking on the phone line. The rest came from minicom, with audio turned on, just a personal preference.

Apart from this glitch, Puppy is ideal for the next time she turns on her computer and has to reformat her hard drive again.
Back to top
Guest
Guest


PostPosted: Wed 06 Jul 2005, 07:28    Post subject:  

abc,
what country are you in?
...perhaps Gkdial likes certain telecom systems better than others!
Back to top
abc
Guest


PostPosted: Fri 08 Jul 2005, 16:00    Post subject:  

Either N.Z. or Oz, depends. I cant remember if I ever tried gdial in Oz, but I go back a long way, to 1995 and slackware. I think Vector put gkdial on their desktop too. Same dismal result. There is one thing I must test on Puppy, and that is ungrab_winmodem which is necessary with that Intel chipset and Arch Linux. The modem works out of the box with Linspire 5.0, but Linspire thrashes the HD every TEN seconds. That is absolutley terrific. I love it when they do things like that so I only burn R-Ws these days.
Back to top
Walt H


Joined: 01 Jun 2005
Posts: 216
Location: citizen of the world

PostPosted: Sat 16 Jul 2005, 00:56    Post subject: Does anyone have a PCI SmartLink modem working in Puppy?  

I just got this new computer which came with Xandros 3.0 installed and a SmartLink PCI modem. The modem works in Xandros, but the distro itself is dog slow. Puppy 1.0.3 seems to fly on this machine, but I can't get the modem to work. The ttySL0 button is available when I run the modem wizard, but it says there is no irq assigned. Neither Gkdial nor eznet works. Haven't tried wvdial yet as it seemed harder to configure the last time I set up a modem in Puppy.

When I go to the KDE Control Center in Xandros, I see the following when I click on PCI:
Code:
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)(prog-if 00 [Generic])
Subsystem: Unknown device 1849:9739
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d400 [size=256]
I/O ports at d000 [size=128]
Capabilities: <available only to root>

I have to put in the root password in order to use KPPP.

When I go to Hardware Detection, this is the information listed about the modem:
Code:
class = 0x070300
classname = Modem
desc = AC'97 Modem Controller
kernel drivers = 8250_pci snd-intel 8x0m
manu = Silicon Integrated Systems [SiS]
pci = 0x1039, 0x7013, 0x1849, 0x9739
revision = a0
subdesc = 9739
submanu = 7013

I don't know whether any of that is on any use to anyone, but I'm hopeful someone can help me get dialup working with this modem. Buying another modem is not an option at the moment. Let me know if there is other information that might help. Thanks.

_________________
Walt

Now that you point it out to me, the answer seems painfully obvious.
Back to top
View user's profile Send private message 
ICQ Number 
Display posts from previous:   Sort by:   
Page 1 of 1 [12 Posts]  
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » House Training » Users ( For the regulars )
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0927s ][ Queries: 12 (0.0040s) ][ GZIP on ]