Canon MP/MX/MG Scanner Drivers - Updated 2016

Problems and successes with specific brands/models of printers
Message
Author
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#21 Post by rcrsn51 »

And thank you for reporting the problem.

User avatar
charlie6
Posts: 1230
Joined: Mon 30 Jun 2008, 04:03
Location: Saint-Gérard / Walloon part of Belgium

#22 Post by charlie6 »

Hi rsrcn51
and many thanks keeping this thread up to date !
On puppy 4.2.1 live-cd session (having libusb-0.1) with Canon Pixma MP160 connected
(...Just getting a try from a live-cd session for reporting results)
+ installed
libgimp2.0-2.6.8.pet
libgio-2.0.so.0.pet (requested dependency for libgimp)
scangearmp-1.40.pet
scangearmp-250series-1.40.pet
(restarting JWM and X )
results:
menu entry "Canon Scangear scanner":
it does not start from menu;

starting from line command

Code: Select all

scangearmp
returns the following message

Code: Select all

# scangearmp
(scangearmp:27910): Gtk-CRITICAL **: gtk_main_quit: assertion `main_loops != NULL' failed
# 
That's it!

Looking at Canon website, there is no Linux driver for MP160

Conclusion: MP160 scanner (only) works fine using XSane following your third solution on page 1 this post + earlier scangearmp_common-1.10-1.i386.pet installation;
but I cannot get the MP160 printer working and then, sadly , use it only ...for scanning :-( !.
( So I use to print from another PC + common black and white 2nd-hand-bought HP-1100-laser printer )

Cheers, Charlie

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#23 Post by rcrsn51 »

@charlie6: That's odd. I just set up a fresh frugal install of 4.2.1 with my MP490 and I didn't get the GTK error. In fact, it ran fine even though libgio was missing.

This sounds like a hardware issue unrelated to the scanner. Do you have another machine or Puppy version you could try?

I will upload a PET that has the MP160-specific stuff. Maybe it will help. It is now listed in the main post.

Regarding a printer driver for your MP160. Patriot has made one here, but the download link is now dead. Perhaps if you send him a PM, he could upload the driver again.

If not, I may be able to build one for you. Have you already tried the Gutenprint driver that comes with Puppy?

Have you been looking at the Canon Europe site for drivers? I notice that they have no Linux listing for the MP160 while the Canon Australia site does. The North American Canon sites don't appear to support Linux at all.

User avatar
charlie6
Posts: 1230
Joined: Mon 30 Jun 2008, 04:03
Location: Saint-Gérard / Walloon part of Belgium

#24 Post by charlie6 »

Hi rscrn51 !
Again thanks, thanks , for your reply !
I reply on your post:
That's odd. I just set up a fresh frugal install of 4.2.1 with my MP490 and I didn't get the GTK error....Do you have another machine or Puppy version you could try?
I have to say a bit more about my live-cd session on Puppy 4.2.1. ... it had esmourguit's french adaptation package. But I think it does not modify that much Puppy to get the error I got. I will come back on it later to try again...

Now on my current puppie :
[ synth's puppyTurbopup-Xtreme-v.1.0 (= puppy 4.20 derivative) remasterized with esmourguit's french translation package + french locale + CUPS1.3.9 + seamonkey 2.0.6 + efax-gtk + wine 1.1.12 + mp150_sane-0.14.4.pet + scangearmp_common-1.10-1.i386.pet + others ]
...Regarding a printer driver for your MP160. Patriot has made one...
Both Canon Pixma MP160 's printer and scanner are now working thanks to Patriot 'pet
I could download and get a try on Patriot's canon-common-3.00-i486.pet on my current puppie as it includes now the MP160 driver: I just ran CUPS and installed the MP160 printer
choosen #usb 1 CANON MP160 among the 3 listed #usb X MP160 references - and could get the printer test page well coloured printed - Woopie ! =-))
(NB: none of the proposed «#usb 1 backend...» and «#usb 2 backend...» give results )
I will upload a PET that has the MP160-specific stuff.
For sure I'll get a try on it ! Thanks again for your time!
Have you already tried the Gutenprint driver that comes with Puppy?
I have this file :

Code: Select all

/usr/lib/cups/driver/gutenprint.5.2     698K
Cheers, Charlie

User avatar
crsrds
Posts: 14
Joined: Tue 29 Jun 2010, 18:02

USB to parallel or Serila to parallel

#25 Post by crsrds »

Hi rcrsn,
I am trying to get puppy to use a parallel port printer. (Epson). I have the drivers for the printer. The problem is I do not have a parallel port on my computer so I will either need to use a serial to parallel converter or a USB to parallel converter.
Can you let me know if there a way I can do this. These converters need drivers I suppose, but the ones I see in the market do not have linux drivers. Any help would be most welcome.
TY,
crsrds.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#26 Post by rcrsn51 »

Sorry. I have no experience with these devices.

User avatar
crsrds
Posts: 14
Joined: Tue 29 Jun 2010, 18:02

#27 Post by crsrds »

Hi,
I just purchased a BAFO 1284 USB to parallel cable, connected it to an Epson dotmatrix printer, using lupu 5.1, it got detected as mnt/dev/usb/lp0. Using cups admin I clicked on find printer and selected the driver and bingo..it worked. Wasted too much time looking for drivers, which it did not need in the first place. Thank you rcrsn for the reply. Just placing this on record so it may help someone like me.
crsrds.

User avatar
charlie6
Posts: 1230
Joined: Mon 30 Jun 2008, 04:03
Location: Saint-Gérard / Walloon part of Belgium

#28 Post by charlie6 »

Hi rscrn51,
many thanks for the MP160-specific pet:
it runs nice since a few weeks now! it's really very handy to use.
I appreciate very much the black and white scanning options (produces tinny sized files) which I am using the most for scanning and mailing hand sketches.

I appreciate also that now both printing and scanning functions of MP160 can be used within a puppy session (before I had to load the printer drivers to get a print; then the scanner was desactived).

Thanks again!
Cheers, Charlie

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#29 Post by rcrsn51 »

And thank you for testing it. It sounds like each Canon model will need its own PET in order to run the scangearmp program.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#30 Post by rcrsn51 »

Attached below is the common package for the Scangear MP v1.60 series and the driver for the MP280.

You will need both. However, it appears that this series does NOT need the libgimp package.

If you own an MP280 and download these packages, would you please report back with their success or failure.
Last edited by rcrsn51 on Fri 17 Aug 2012, 20:13, edited 2 times in total.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#31 Post by rcrsn51 »

Attached below is the common package for the Scangear MP v1.30 series and the driver for the MX 330.

You will need both, plus the libgimp package from the start of this thread.

If you own an MX 330 and download these packages, would you please report back with their success or failure.
Last edited by rcrsn51 on Fri 17 Aug 2012, 20:14, edited 2 times in total.

User avatar
vtpup
Posts: 1420
Joined: Thu 16 Oct 2008, 01:42
Location: Republic of Vermont
Contact:

#32 Post by vtpup »

rcrsn51, thanks so much for all the work you've done.

I just got a Pixma MX870 all in one, and with your and Patriots help, upgraded CUPS to 1.311 on my Puppy 4.32 and loaded Canon wireless printer drivers, etc. Wireless printing now works, and I'm focusing on scanning.

I've started with your Pixma package for Xsane, since I'm used to using that scanning program. But the Puppy opening script for Xsane asks if the scanner is connected via USB, Parallel, or SCSI, only. Not via network. So wireless doesn't seem to be a possibility, at present.

The next choice, Canon scan software doesn't look like there's a driver for the MX870, unless I'm mistaken about that. So if you plan on writing any more drivers for this thread, that's one I'd like to see.

Thanks!

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#33 Post by rcrsn51 »

Attached below is the common package for the Scangear MP v1.50 series and the driver for the MX870.

You need both. However, this series does NOT need the libgimp package. You will find a menu item under Graphic for the ScangearMP scanner program.

@vtpup: Could you test this by first connecting your MX870 directly by USB? Then try by wireless. If you are very lucky, it may detect the wireless scanner!

[Edit] The MX340 driver below also requires the scangearmp_common-1.5.pet.
Last edited by rcrsn51 on Fri 17 Aug 2012, 20:14, edited 3 times in total.

nyunda
Posts: 5
Joined: Tue 12 Apr 2011, 06:11
Location: west java

canon mp270 scanner

#34 Post by nyunda »

i download pixma-backend-qrky-1.0.21.pet posted by rcrsn51, run xsane image scanner in puppy 520, & my scanner is detected, thanks rcrsn51.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#35 Post by rcrsn51 »

Here is the scangearmp driver package for the MP495. It also requires the scangearmp_common-1.60.pet from Page 2. However, it does NOT require the Gimp package. When installed, there will be a menu entry for the scangear program under Graphic.

The MG5100 driver attached below also requires the scangearmp_common-1.60.pet from Page 2.
Last edited by rcrsn51 on Sun 02 Dec 2012, 00:49, edited 4 times in total.

User avatar
charlie6
Posts: 1230
Joined: Mon 30 Jun 2008, 04:03
Location: Saint-Gérard / Walloon part of Belgium

Canon MP160 on Slacko

#36 Post by charlie6 »

Hi rcrsn51,
on Slacko4.99.7
works fine after only installed:
scangearmp-common-1.40.pet
libgimp2.0-2.6.8.pet
scangearmp-mp160-1.00.pet
scangearmp-locale-1.40.pet

Just one slight detail which ennoys me a bit: (on Slacko or on puppy 4.20 as well)

usually, when in a 'save as' dialog box, the path where to save the to-be-saved-file may be selected just:
- browsing across directories by using the mouse cursor and click once on the choosen folders name
- and then entering the file name;

here with scangearmp, one has to double click on each selection instead this in spite of other applications gtkdialog 'save as' boxes are 'single click navigation' settled.

Moreover, I'm using a pen tablet. So I use to position the cursor using the pen and validate the selection by pressing just once whether the 'Enter' or the 'SpaceBar' key with the other hand. This cannot be done with scangearmp.

Is there a way to get the scangearmps dialog box working as the other 'save as' dialog box (as on abiword, or whatever else application)?

Thanks for any advice!
Cheers, Charlie

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: Canon MP160 on Slacko

#37 Post by rcrsn51 »

charlie6 wrote:here with scangearmp, one has to double click on each selection instead this in spite of other applications gtkdialog 'save as' boxes are 'single click navigation' settled.
Scangearmp is using the GTK file chooser for its "Save as" which has that annoying double-click function. There is nothing I can do about it.

However, you could just save the file to some place easy, like /root, then copy it to the desired location afterwords.

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#38 Post by Geoffrey »

rcrsn51 wrote:Attached below is the common package for the Scangear MP v1.60 series and the driver for the MP280.

You will need both. However, it appears that this series does NOT need the libgimp package.

If you own an MP280 and download these packages, would you please report back with their success or failure.
Thanks, scanner works in racy 5.2.2 and Saluki and also prints with your canon_mp280-3.40.pet

Geoffrey

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#39 Post by rcrsn51 »

Here are the Scangear drivers for the MX410 and MX880. These units are wifi-enabled, so they are capable of network scanning. Depending on your Puppy version, they may be auto-detected by the pixma backend in SANE, so you can use Xsane or Peasyscan without installing these drivers.

If not, download both the common PET and the model-specific PET. Run ScangearMP from the Graphic menu. Perform an Update operation and wait for Scangear to locate your device. Canon detects a networked scanner by its MAC address instead of the usual IP address.
Last edited by rcrsn51 on Fri 17 Aug 2012, 20:15, edited 1 time in total.

bones01
Posts: 371
Joined: Mon 11 Aug 2008, 07:47
Location: Melbourne, Aus

#40 Post by bones01 »

Hi RCRN,
My office has a Canon Pixma MP800 and I can't find the specific .pet for that. If you have the time, could you put one together please?

I'm using Lucid 528 mostly, on a frugal install. do you need any other info?

Thanks

Bones
Dell Latitude D630 running Puppy 5.2.8 frugal, Macpup 525 frugal (if I can get it working again. Sadly, I couldn't get it fixed :? )
Precise Puppy 5.4 live DVD
Precise 5.7.3 on USB

Post Reply