Racy Puppy 5.2.2 Final, 18 Nov. 2011

Please post any bugs you have found
Message
Author
User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#321 Post by jim3630 »

BarryK

suppose this is a stupid question. what repos can use for pets in racy other than what are in ppm? is racy built from ubuntu or which?

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

#322 Post by Billtoo »

BarryK wrote:Billtoo,
You are quick! Yes indeed, 5.2.2 "TESTING" is uploaded:

http://bkhome.org/blog/?viewDetailed=02599
The md5sum.txt is missing from the racytesting directory on ibiblio.

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#323 Post by Jim1911 »

I'd like to install the proprietary driver the latest Nvidia driver, where is the kernel_source for kernel-3.0.7-pae-i686 used for this distribution located?

Thanks,
Jim

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

#324 Post by Billtoo »

Jim1911 wrote:I'd like to install the proprietary driver the latest Nvidia driver, where is the kernel_source for kernel-3.0.7-pae-i686 used for this distribution located?

Thanks,
Jim
http://bkhome.org/sources/kernel-3.0.7/

name : puppy
password : linux

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#325 Post by Jim1911 »

Billtoo wrote:
Jim1911 wrote:I'd like to install the proprietary driver the latest Nvidia driver, where is the kernel_source for kernel-3.0.7-pae-i686 used for this distribution located?

Thanks,
Jim
http://bkhome.org/sources/kernel-3.0.7/

name : puppy
password : linux
Thank you.

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#326 Post by Jim1911 »

Frugal installation on an ext4 partition with a 4fs save file. It is fast and stable and the Nvidia driver installed and runs properly. However, upon reboot the nvidia driver did not work. To correct the driver problem, I removed the nouveau driver and reinstalled the proprietary driver which appears to be working properly now.

I spoke too soon, after a reboot, I could not restart regardless of driver selection. The NVIDIA-Linux-x86-285.05.09.run file installed the driver properly and was running great until I rebooted. I'll keep trying but not this evening.

Cheers,
Jim

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#327 Post by jim3630 »

after looking at all of the racy thread including the 6 links
on the first page one of which points to the wary thread.
http://www.murga-linux.com/puppy/viewtopic.php?t=72258

wary's first page has 10 links and somewhere in the middle is a link
leading to another site that does mention wary is built from T2 sources.

I'm a user not a programmer, builder, or computer science student
nor aspire to be. don't know what t2 sources are.

racy testing was to target wary repo doesn't indicate what wary
is compatible with.

just want to know what pets are compatible with racy.

what would help on racy first page state what is the distro_compat_version.
and in /etc/DISTRO_SPECS instead of listing "puppy" perhaps ubuntu, slacko,
debian, or whatever would be helpful.

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#328 Post by jim3630 »

slacko does show up in PPM. kind of confusing what
pets are compatible.

pfix=ram of 5.2.2. updated PPM then it shows slacko repo.

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#329 Post by James C »

Wary and Racy are based on T2 ....... just as Puppy 4.00 and Quirky were.
http://t2-project.org/

That would seem to lead to the "Puppy Common", "Quirky" and "Puppy 4" repos being the ones most compatible.

aarf

#330 Post by aarf »

522 Testing . needs to do xorgwizard xwin to boot. Network wizard doesnt work with backslash \ in the Wifi name. No scroll bars on the first info screen.
the backslash is actually \x0D which is
wicd from pussy (debian) can connect but no puppy i have tried can. the signal is flakey not strong so that may also be the part problem.
Last edited by aarf on Sun 20 Nov 2011, 03:34, edited 2 times in total.

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Racy Puppy 5.2.1.90 (5.2.2 RC -- 10 Nov. 2011)

#331 Post by Billtoo »

Manual frugal install to hp desktop pc.
Everything worked properly at bootup.
Sound and wired network were good.
I skipped the video wizard and rebooted loading the devx and kernel
source sfs after creating the save file.
I installed the proprietary nvidia driver in the usual way.

Thu 17 Nov 2011 Operating System: Racy Puppy-5.2.2 Linux 3.0.7
0.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2)
oem: NVIDIA product: GT216 Board - 0682vb12 Chip Rev

X Server: Xorg Driver: nvidia
X.Org version: 1.11.0
dimensions: 1280x1024 pixels (342x271 millimeters)
depth of root window: 24 planes

direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 220/PCI/SSE2
OpenGL version string: 3.3.0 NVIDIA 285.05.09

Intel(R) Core(TM)2 Duo CPU E4500
Core 0: 2200 1: 2200 MHz

# glxgears
31298 frames in 5.0 seconds = 6259.440 FPS
31380 frames in 5.0 seconds = 6275.995 FPS
31315 frames in 5.0 seconds = 6262.841 FPS

Computer
Processor 2x Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz
Memory 4146MB (98MB used)

No problems so far.

User avatar
broomdodger
Posts: 279
Joined: Sat 10 May 2008, 02:38
Location: Santa Cruz, CA

racy 5.2.2 sanity check

#332 Post by broomdodger »

racy 5.2.2 sanity check
IBM ThinkPad x30, 1.2GHz single core, 512MB ram
Note: racy 52190 all worked well except flash and auto wifi

racy 5.2.2
frugal manual install

1. start to black screen
nothing works
force shutdown

2. restart no desktop
use 'Menu' to reboot

3. restart no desktop
Lighthouse report = vesa
use 'Menu' exit to prompt
xorgwizard - probe
xwin
Lighthouse report = intel
usually vesa has been faster than intel
but this time intel is fast

4. wifi not automatically detected
connect to wifi manually ok
flash installed
test some pages with flash, ok! no delays, very smooth
no insert key problem

5. install devx_racy_5.2.2.sfs
Utility > Glade Interface Designer - 'icon' STILL missing

6. Note: Pmusic has been updated to 2.2.2 with many fixes

7. compile Vim 7.3.353
gtk2 not found, X11-Athena GUI compiled
worked in racy 52190 and 52191
tried:
--enable-gui=gtk2
--enable-gui=gtk2 --disable-gtktest
--enable-gui=gtk
all fail and compile a non-GUI version

-Bill

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#333 Post by 01micko »

No barks at first boot, ok after X restart after settings are made.

Minor woof bug.. the Xorg puninstallsh got carried through. ( I have previously made this mistake by leaving a puninstall.sh script in a package). Woof should have a line something like..

[ -x rootfscomplete/puninstall.sh ] && rm -f rootfscomplete/puninstall.sh

I have aarf's problem with xorg-auto on my eee-701SD, need to run xorgwizard.. but how would a noob know what to do???

EDIT: Yeah, ok.. "Usual thing is to type 'xwin'".. why?. xorg-auto just failed, xorg is not configured. Wouldn't it be better to write "type xorgwizard at the login prompt.. hit ENTER to get to the login prompt" (or better still skip the login as we can't!) .. just a read keepgoing so people can get a chance to write down "xorgwizard".. just saves a step.

EDIT2: I suppose how it is is ok, when "xwin" fails you get prompted to run "xorgwzard". Only thing then is that it should probably have another line after that saying. "Once you have completed "xorgwizard" type "xwin" to get a desktop" (or words to that effect).
Last edited by 01micko on Fri 18 Nov 2011, 22:04, edited 2 times in total.
Puppy Linux Blog - contact me for access

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#334 Post by BarryK »

Racy 5.2.2 released

See blog announcement:

http://bkhome.org/blog/?viewDetailed=02602
[url]https://bkhome.org/news/[/url]

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#335 Post by 01micko »

Here's the Xorg.0.log from the eee, seems hsync is out of range and a suitable screen couldn't be found. I think this is a bug created by a fix for some other hardware as it used to work. Maybe in future detect a tiny screen? (I'll look at this some before Slacko-5.3.1, has the same problem in my 5.3.0.1/2 RC)
Attachments
xorg.log.gz
(2.96 KiB) Downloaded 719 times
Puppy Linux Blog - contact me for access

dawg
Posts: 116
Joined: Sun 09 Aug 2009, 14:36
Location: still here
Contact:

#336 Post by dawg »

Bug in wcpufreq. Attached pic.

Edit: does not apply for Wary 5.2.2.
Attachments
wcpufreq-bug-racy522.png
(35.46 KiB) Downloaded 6027 times
I used to only like Puppy as a friend, but now I think our relationship is starting to develop into something more... :D

User avatar
jim3630
Posts: 791
Joined: Mon 14 Feb 2011, 02:21
Location: Northern Nevada

#337 Post by jim3630 »

BarryK addressed a question to you. what is your answer?

User avatar
DaveS
Posts: 3685
Joined: Thu 09 Oct 2008, 16:01
Location: UK

#338 Post by DaveS »

Final seems much better. Very stable, fast, no Seamonkey/Firefox problems, printing is fine. Have to probe for B43, but hey, that is a kernel issue.
Spup Frugal HD and USB
Root forever!

dawg
Posts: 116
Joined: Sun 09 Aug 2009, 14:36
Location: still here
Contact:

#339 Post by dawg »

jim3630 wrote:BarryK addressed a question to you. what is your answer?
Who are you referring to?
I used to only like Puppy as a friend, but now I think our relationship is starting to develop into something more... :D

User avatar
pemasu
Posts: 5474
Joined: Wed 08 Jul 2009, 12:26
Location: Finland

#340 Post by pemasu »

/usr/sbin/wcpufreq, line 156:

Code: Select all

cd /lib/modules/$kernelVersion/kernel/arch/*/kernel/cpu/cpufreq
should be in 3.x kernels ( I believe):

Code: Select all

 cd /lib/modules/*/kernel/drivers/cpufreq
or

Code: Select all

 cd /lib/modules/$kernelVersion/kernel/drivers/cpufreq
I think that there is something else weird in script with 3.x kernels.
When choosing scaling governor: ondemand, powersave, performance etc...I get all the scaling drivers as choosable also. This happens with 3.1 kernel also.

Post Reply