Puppi Raspberry Pi Hardware

News, happenings
Post Reply
Message
Author
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

Puppi Raspberry Pi Hardware

#1 Post by Lobster »

Image

Are you ready?

For the first time in Puppy's history we may get sufficient developers, testers and users to fully support a piece of specific hardware. We have had Puppy ready installed on a couple of x86 devices but they were quite pricey. It really all starts from the beginning again with the Raspberry Pi which uses an ARM processor :)
http://puppylinux.org/wikka/PARM

After Pi we may repeat the experience with other ARM hardware 8)
Some of you will have received the following email:
The Raspberry Pi Foundation will be making a big (and very positive) announcement that just might interest you at 0600h GMT on Wednesday 29 February 2012. Come to http://www.raspberrypi.org to find out what's going on.

Eben Upton
Executive Director, Raspberry Pi Foundation
Here is what Ebens wife Liz, says about the announcement:
I'm not allowed to say what the announcement is for arcane contractual reasons (it's actually quite interesting – I'll explain when I can). But I *am* allowed to say that you will feel like a total a******e if you don't get out of bed in time.
I will be up by then. :shock:

Good luck to the Raspberrians
A great bunch of enthusiasts, geeks, educators and penguins


Puppy Linux
Free Your Computer
Last edited by Lobster on Wed 30 May 2012, 01:49, edited 3 times in total.
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#2 Post by antiloquax »

:D
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

nooby
Posts: 10369
Joined: Sun 29 Jun 2008, 19:05
Location: SwedenEurope

#3 Post by nooby »

0600h GMT on Wednesday 29 February 2012

Haha Eben has to be a true Geek to be up that early.
May I guess it is a lottery? We send in our email addresses
and they draw a random one that get a RPi for free?
That would be cool to take part in. What else could it be?
I can always set an alarm on my SmartPhone? to wake me up?
I use Google Search on Puppy Forum
not an ideal solution though

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#4 Post by antiloquax »

With any luck the news is they actually have 100,000 RPis, not 10,000!
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

User avatar
Dave_G
Posts: 453
Joined: Thu 21 Jul 2011, 13:53

#5 Post by Dave_G »

Perhaps they will sell the units for only $10 for keeping us waiting so long?

nooby
Posts: 10369
Joined: Sun 29 Jun 2008, 19:05
Location: SwedenEurope

#6 Post by nooby »

Next wild guess. The Ten first buyers will get the software at no cost?
I mean the SD Card cost a lot does it not? What is the smallest one need
to get a OS going? How does these small SD card look like so one know
if one have them already. Those I have for my Sony Ericson and Nokia and
Huawei has also same name but I know there are bigger ones that are used
for slots in cardreaders? So those I have maybe is named MicroSD and
those for the slot in my Netbook is named just Sd card? Which one do they prefer?

Ooops I guess obe ccan use a kind of adapter to make a micro into a standard one?
I use Google Search on Puppy Forum
not an ideal solution though

User avatar
Dave_G
Posts: 453
Joined: Thu 21 Jul 2011, 13:53

#7 Post by Dave_G »

nooby

SD cards are not expensive.
Search for 2GB+sd+card on Google and you will see them available
from about $5 to about $15.
The price will vary by country and store but not by huge amounts.
I assume that 2GB should be more then enough for the PI.

nooby
Posts: 10369
Joined: Sun 29 Jun 2008, 19:05
Location: SwedenEurope

#8 Post by nooby »

Yes I ahve maybe two such small MicroSD cards so that will be good.

But the interest is huge so most likely England and USA will buy all
of the RPi this batch. I hope they make more such later and not
stop with this one.
I use Google Search on Puppy Forum
not an ideal solution though

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#9 Post by Lobster »

Good news guys - they will be going volume after the first batch :)
AND the model A (which has only one USB (wifi dongle possible?) and no Ethernet
now has 256 ram - that is the $25 one - cheap and plenty of ram for Puppy.

Were you up? Did you get through to the suppliers?
I was. Drinking the hard stuff - black tea and Buddhist mantras . . .
Seemed to have expressed an interest with one of the suppliers

Oh the countdown was fun :roll:
Old enough to know the climax does not last long . . . :wink:

Puppy Linux
ARM your computer with the Dog
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Terryphi
Posts: 761
Joined: Wed 02 Jul 2008, 09:32
Location: West Wales, Britain.

#10 Post by Terryphi »

Why don't they put the thing in a case? Hey, we don't care about Health & Safety. ;)

There is plenty of scope for consumerists to spend money on Raspberry PI accessories. A quick Google search reveals several companies eager to cash in.
[b]Classic Opera 12.16 browser SFS package[/b] for Precise, Slacko, Racy, Wary, Lucid, etc available[url=http://terryphillips.org.uk/operasfs.htm]here[/url] :)

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#11 Post by antiloquax »

Lobster wrote: Were you up? Did you get through to the suppliers?

Seemed to have expressed an interest with one of the suppliers
Yes, and me too - I "expressed an interest" with RS (Farnell seems to have crashed and then sold out very fast).

I am not happy because I still don't know if I will get one of the first batch :(
Anyway ...
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#12 Post by Lobster »

Terryphi wrote:Why don't they put the thing in a case?
It will be put in a clear plastic case by the time it gets into schools
for when the little dogs get their paws on it

Dr Upton (or Eben to use his Puppy name) and the Pi team are gonna now focus on
programming - which means getting them snakes ready - Python is their language of choice
We might wean them onto Vala/Genie :)

Did not get a board?
http://www.osnews.com/story/25661/Raspb ... nto_frenzy
Not the only one . . .
http://youtu.be/7mY5P8EwYUw

Incidentally I sent congratulation just before launch day on behalf of the Puppy Kennel
Last edited by Lobster on Wed 29 Feb 2012, 12:25, edited 1 time in total.
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#13 Post by antiloquax »

Team Python FTW!

I am learning as fast as I can! The latest post on my blog is a little "hack your homework" thing for mean, media and mode.

My next task is to write a program that does multiplication using the grid method. Fun!
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#14 Post by Lobster »

antiloquax wrote: I am learning as fast as I can!
Pi bundles are on the cards . . . cheap barebone ARM computers :)
http://www.element14.com/community/groups/raspberry-pi
I know Puppys recycle, use their old hardware and generally turn any old
PC into a speed demon but this is just for fun . . .
I think I may have registered my interest twice now . . . :?

Must have a lie down . . . and a sardine . . . :wink:

An OS for Free?
Puppy Linux
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#15 Post by rhadon »

Hi,

started ordering at 6.00 GMT, took me more than 2 hours to finish (farnell).
Got a sales confirmation but no delivery date (they will tell me later). So I don't know, am I with the winners :D or not :cry: .

It's hard to wait :? ,
Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#16 Post by Lobster »

rhadon you are a winner :)
I did not get to a confirmed order :shock:

I was there on time if not 4 hours early (I might have fallen asleep so had to stay awake)
I went through that announcement page in seconds looking for somewhere to order . . .
and clicked both ordering addresses - the industrial servers were already gridlocked
within 20 to 30 seconds of the Rpi announcement.

I will have to wait with the fishes . . . :cry:
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

Pence
Posts: 200
Joined: Sat 30 Jul 2005, 13:27

#17 Post by Pence »

The RS Components site is registering, if you have an interest in buying.

aarf

#18 Post by aarf »

Lobster wrote:rhadon you are a winner :)
I did not get to a confirmed order :shock:

I was there on time if not 4 hours early (I might have fallen asleep so had to stay awake)
I went through that announcement page in seconds looking for somewhere to order . . .
and clicked both ordering addresses - the industrial servers were already gridlocked
within 20 to 30 seconds of the Rpi announcement.

I will have to wait with the fishes . . . :cry:
'desire is the source of all suffering.' [by not anon. (Not recently.)]

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#19 Post by rhadon »

Lobster wrote:rhadon you are a winner
I did not get to a confirmed order
I hope so, but I'm not sure.
It's a problem of the language. I didn't know the right english word. :oops:

confirmed order = Auftragsbestätigung.
What I got was a "Auftragseingangsbestätigung" with a commission number, which only means that they received my order. If the products are really available, I get a 'right' order confirmation. So I'm as cute as before :?

Hoping and waiting and waiting and hoping... :lol:

Although I know it's not so important (life goes on), for a long time I wasn't so excited about an order.

~Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#20 Post by BarryK »

I ordered here:

http://au.element14.com/jsp/search/prod ... KU=2081185

I even paid for it, but delivery is estimated about a month away. This is for Australia, price including delivery is AU$41.80.

If you are in New Zealand, just change "au" to "nz".
[url]https://bkhome.org/news/[/url]

Post Reply