OscarTalks wrote:Anyone else finding that Leafpad menu icon is missing...?
Code: Select all
cd /usr/share/pixmaps
mv leafpad.png leafpad.xpm
jwm -restart
OscarTalks wrote:Anyone else finding that Leafpad menu icon is missing...?
Code: Select all
cd /usr/share/pixmaps
mv leafpad.png leafpad.xpm
jwm -restart
Ok, I have commented those lines in /etc/X11/xorg.conf-auto-pc:01micko wrote:Ok on my radeon... but there is a bug. GLX is disabled in the xorg.conf, and DRI, an oversight I suspect. Once I commented those lines acceleration works with the radeon driver.
Code: Select all
# This loads the GLX module (if present). xorg 7.4/5, need explicit disable to disable... change "Disable" to "Load" if reqd...
# Disable "glx" #LOADGLX
# This loads dri module (if present). 7.4 loads it by default, have to disable... change "Disable" to "Load" if reqd...
# Disable "dri" #LOADDRI
Can you disable kms, then try the attached pet.LateAdopter wrote:Hello Barry
I have the integrated RS880G graphics. With Precise B1 it is still nearly as broken as it was previously.Anyone got an ATI/radeon video chip to test?
On first boot, dri and glx are disabled by xorg.conf, which is just as well because, with KMS enabled, Xorg has a fatal error and aborts without loading the keyboard.
On selecting Radeon in xorgwizard, xorg won't start because there are no driver modules for it to load, in /usr/lib/xorg/modules/drivers. So it is necessary to copy them over from the driver backup folder.
With KMS disabled the Radeon R600 driver will load to the point where 2D acceleration is enabled, but AIGLX has various errors.
AIGLX falls back to using LLVM software rasteriser, which also has an error and falls back to using swrast.Code: Select all
[ 13.900] (II) AIGLX: Screen 0 is not DRI2 capable [ 13.900] drmOpenDevice: node name is /dev/dri/card0 [ 13.900] drmOpenDevice: open result is 10, (OK) [ 13.900] drmOpenByBusid: Searching for BusID pci:0000:01:05.0 [ 13.900] drmOpenDevice: node name is /dev/dri/card0 [ 13.900] drmOpenDevice: open result is 10, (OK) [ 13.900] drmOpenByBusid: drmOpenMinor returns 10 [ 13.900] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 13.900] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 [ 14.583] (EE) AIGLX error: r600 does not export required DRI extension [ 14.584] (EE) AIGLX: reverting to software rendering [ 14.657] (II) AIGLX: Loaded and initialized swrast [ 14.657] (II) GLX: Initialized DRISWRAST GL provider for screen 0
Also there is no modesetting because KMS is disabled, and R600 does not support userspace modesetting.
So adding LLVM did allow the loading of xorg to complete, but nowhere near the right answer.
I'm not a linux expert but I have been investigating this by reference to Fatdog 600a2 where the Radeon R600 configures itself correctly on the same motherboard.
The fatal error with KMS enabled is:
I did find a bug report filed for Arch for this error, and the opinion was that it was related to the version of xf86-video-ati/radeon and they had fixed it by reverting to an earlier version. But I don't think it was conclusive.Code: Select all
[ 13.257] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch. [dri] This chipset requires a kernel module version of 1.17.0, [dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and [dri] that this driver was built with support for KMS. [dri] Aborting.
Precise has 6.14.99 git 20111219
Fatdog has 6.14.4 which was released on 28th March 2012.
I can't find any sign of updates for Ubuntu, but there are from Debian. But they are compiled for xorg 1.12, so I couldn't try them.
The other difference that I noticed was the that output fromreports a different radeon version: 1.33.0 for Precise and 2.13.0 for Fatdog.Code: Select all
dmesg | grep drm
From Precise Puppy:
From Fatdog 600a2:Code: Select all
[ 29.805966] [drm] Initialized drm 1.1.0 20060810 [ 29.822705] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 29.822707] [drm] No driver support for vblank timestamp query. [ 29.822710] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 [ 30.092802] [drm] Setting GART location based on new memory map [ 30.093242] [drm] Loading RS780 CP Microcode [ 30.163970] [drm] Resetting GPU [ 30.164025] [drm] writeback test succeeded in 1 usecs
I hope you understand this better than I do!Code: Select all
[drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1849:0x9710). [drm] register mmio base: 0xFEAF0000 [drm] register mmio size: 65536 [drm] Detected VRAM RAM=320M, BAR=256M [drm] RAM width 32bits DDR [drm] radeon: 320M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading RS780 Microcode [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff8800515afc00 [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] DVI-D [drm] HPD3 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP3: INTERNAL_KLDSCP_LVTMA [drm] radeon: power management initialized [drm] fb mappable at 0xD0142000 [drm] vram apper at 0xD0000000 [drm] size 7680000 [drm] fb depth is 24 [drm] pitch is 6400 fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.13.0 20080528 for 0000:01:05.0 on minor 0 continues...
I also noticed that xorg on Precise B1 loads the modules twice and tries to load fglrx. A3 did not do this, but I don't think it makes any difference.
Code: Select all
# gtk-query-immodules-2.0 > /usr/lib/gtk-2.0/2.10.0/gtk.immodules
Code: Select all
# gtk-query-immodules-2.0 > /etc/gtk-2.0/gtk.immodules
# ln -s /etc/gtk-2.0/gtk.immodules /usr/lib/gtk-2.0/2.10.0/gtk.immodules
Code: Select all
[ 16.555] (II) LoadModule: "ati"
[ 16.555] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 16.570] (II) Module ati: vendor="X.Org Foundation"
[ 16.570] compiled for 1.11.3, module version = 6.14.4
[ 16.570] Module class: X.Org Video Driver
[ 16.570] ABI class: X.Org Video Driver, version 11.0
[ 16.570] (II) LoadModule: "radeon"
[ 16.570] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 16.585] (II) Module radeon: vendor="X.Org Foundation"
[ 16.585] compiled for 1.11.3, module version = 6.14.4
[ 16.586] Module class: X.Org Video Driver
[ 16.586] ABI class: X.Org Video Driver, version 11.0
Code: Select all
[ 17.032] (II) RADEON(0): Direct rendering enabled
[ 17.032] (II) RADEON(0): Setting EXA maxPitchBytes
[ 17.033] (II) EXA(0): Offscreen pixmap area of 117538816 bytes
[ 17.033] (II) EXA(0): Driver registered support for the following operations:
[ 17.033] (II) Solid
[ 17.033] (II) Copy
[ 17.033] (II) Composite (RENDER acceleration)
[ 17.033] (II) UploadToScreen
[ 17.033] (II) DownloadFromScreen
[ 17.033] (II) RADEON(0): Acceleration enabled
Code: Select all
[ 17.086] (II) AIGLX: Screen 0 is not DRI2 capable
[ 17.086] drmOpenDevice: node name is /dev/dri/card0
[ 17.086] drmOpenDevice: open result is 10, (OK)
[ 17.086] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 17.086] drmOpenDevice: node name is /dev/dri/card0
[ 17.086] drmOpenDevice: open result is 10, (OK)
[ 17.086] drmOpenByBusid: drmOpenMinor returns 10
[ 17.086] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 17.086] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 17.728] (EE) AIGLX error: r600 does not export required DRI extension
[ 17.728] (EE) AIGLX: reverting to software rendering
[ 17.814] (II) AIGLX: Loaded and initialized swrast
[ 17.814] (II) GLX: Initialized DRISWRAST GL provider for screen 0
Code: Select all
[ 13.022] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 13.022] (II) [KMS] drm report modesetting isn't supported.
[ 13.022] (WW) Falling back to old probe method for vesa
Code: Select all
[ 13.233] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 13.234] (WW) Falling back to old probe method for vesa
Code: Select all
[ 9.466] (II) Loading /usr/X11R7/lib64/xorg/modules/drivers/radeon_drv.so
[ 9.466] (II) [KMS] Kernel modesetting enabled.
[ 9.466] (WW) Falling back to old probe method for vesa
Code: Select all
[ 13.239] (--) RADEON(0): Chipset: "ATI Radeon HD 4200" (ChipID = 0x9710)
Code: Select all
[ 45.770] (II) [KMS] drm report modesetting isn't supported.
[ 45.784] (--) RADEON(0): Chipset: "ATI Radeon HD 5450" (ChipID = 0x68f9)
[ 45.799] (II) RADEON(0): No DRI yet on Evergreen
[ 46.081] (WW) RADEON(0): Direct rendering disabled
[ 46.081] (EE) RADEON(0): Acceleration initialization failed
[ 46.081] (II) RADEON(0): Acceleration disabled
L18L,L18L wrote:# puppyhelp
/usr/local/bin/gtkmoz: line 29: exec: mozilla: not found
#
andCode: Select all
ln -s /usr/lib/seamonkey/seamonkey-bin /usr/local/bin/mozilla
is showing translated index.html nowCode: Select all
puppyhelp
Thanks, I fixed it in the 'leafpad' template in Woof.L18L wrote:OscarTalks wrote:Anyone else finding that Leafpad menu icon is missing...?this will make it displayed in menuCode: Select all
cd /usr/share/pixmaps mv leafpad.png leafpad.xpm jwm -restart
Thanks, a fix is applied in 3builddistro and rc.update in Woof.shinobar wrote:@linux28, Barry, and to all
The precise puppy, both Pemasu's and Barry's, have the file '/etc/gtk-2.0/gtk.immodules', but this file is meaningless. You can remove it.
Instead, you need to create new gtk.immodules at '/usr/lib/gtk-2.0/2.10.0/gtk.immodules'. Run on a viertual terminal.The SCIM in lang_pack_ja worked on Pemasu's precise and on Barry's alpha-3 by the treatment above.Code: Select all
# gtk-query-immodules-2.0 > /usr/lib/gtk-2.0/2.10.0/gtk.immodules
But on the beta-1, SCIM launches and can input KANA letters but fails to convert int KANJI letters. Pressing the space-bar to swithing the mode but does not work.
We are wondering what is the difference between precise alpha-3 and the beta-1.
Reverted all the contents under /usr/lib/gconv and got no difference.
Hmmm! Oh well, beta2 will have yet another permutation to try!LateAdopter wrote:To summarize, I think it's like this:
Radeon R600g Driver requires DRI2 KMS does not do userspace modesetting
Precise Kernel + Radeon Module does KMS DRI2, which is correct.
DRI can do KMS or userspace or no modesetting
DRI2 requires KMS
My RS880 will do DRI or DRI2 with R600
01micko's Evergreen only does DRI2 with R600
drm has decided that KMS is not supported, which is incorrect. WHY?
My RS880 ends up with DRI2 in the kernel and DRI in the R600 hence no display at all.
01micko's ends up with DRI2 in the kernel and no DRI/DRI2 in the R600 hence display but no acceleration.
With modeset=0 kernel falls back to DRI
My RS880 ends up with DRI in the kernel and R600, hence 2D acceleration but no 3D acceleration.
01micko's Evergreen can't do DRI with R600. So probably no change.
I hope that makes sense!
Hi Indiansszindian wrote:# lsusb
Bus 001 Device 002: ID 13b1:002f Linksys AE1000 v1 802.11n [Ralink RT3572]
>>>---Indian------>
Code: Select all
/lib/modules/all-firmware/rt2x00/lib/firmware
OT, but yes:BHINTZ wrote:Has anyone been working on sleep/resume for laptops.
I tried to move acpi from upup, but that didn't work
bob
mirrored.BarryK wrote:Precise Puppy 5.2.60 (beta2) is out.
Download from here:
http://distro.ibiblio.org/quirky/test/precise-5.2.60/