Puppy-eloix: Electronics, Schematics and Engineering

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#21 Post by darkcity »

link is working fine for me,
http://minus.com/lbllMxs14KD3jV

if you can't download I will upload to another provider. . .

User avatar
inoxidabile
Posts: 148
Joined: Sat 13 Sep 2008, 12:37

#22 Post by inoxidabile »

I'm sorry, but I tried from two positions, with two different pc and nevertheless I'm not able to download it. :(

Then, could You kindly give me a different link?

But, please, I would like to avoid any disturb to You and then if You will have any trouble for this , don't worry, it's fine however :)

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

#23 Post by abu_ilya »

inoxidabile wrote:I'm sorry, but I tried from two positions, with two different pc and nevertheless I'm not able to download it. :(

Then, could You kindly give me a different link?

But, please, I would like to avoid any disturb to You and then if You will have any trouble for this , don't worry, it's fine however :)
The link which is suggested points to version 3.13, please download 3.15, that one is better. Here's the link:
http://i.minus.com/1339170650/J2aD-3XrY ... ix3.15.iso

I'd really appreciate it if someone could make it available via torrent download

regards,
abu ilya
Last edited by abu_ilya on Thu 07 Jun 2012, 20:25, edited 1 time in total.

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#24 Post by darkcity »

ha, I tried to upload to sendspace, but after an hour it errored out - later found its max is 300Mb.

The link for 3.15 doesn't seem to work, found it here-

http://hugocoolens.minus.com/lGDamSjx888YI

but can't get it to start download. . .

BTW you can edit your first post to link to 3.15.
---

big file share thread here-
http://murga-linux.com/puppy/viewtopic.php?t=3778

they recommend
http://www.mydrive.ch/

:twisted:

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

#25 Post by abu_ilya »

darkcity wrote:ha, I tried to upload to sendspace, but after an hour it errored out - later found its max is 300Mb.

The link for 3.15 doesn't seem to work, found it here-

http://hugocoolens.minus.com/lGDamSjx888YI
For me the original link does work, but "minus" seems not very reliable, sometimes it works, sometimes not...
BTW you can edit your first post to link to 3.15.
OK, I edited it, even though that may disturb the chronology of things a bit
OK, here it is:
http://www.mydrive.ch/download/19346558 ... ix3.15.iso


abu_ilya

User avatar
inoxidabile
Posts: 148
Joined: Sat 13 Sep 2008, 12:37

#26 Post by inoxidabile »

Thank You for Your support !

But now, this is what I see:
- minus link, it doesn't start any download
- mydrive link, it requires an username and a password, I tried the well-known words "puppy" and "linux" but without success.

Could You kindly tell me any suggestion?

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

#27 Post by abu_ilya »

inoxidabile wrote:Thank You for Your support !

But now, this is what I see:
- minus link, it doesn't start any download
- mydrive link, it requires an username and a password, I tried the well-known words "puppy" and "linux" but without success.

Could You kindly tell me any suggestion?
Sorry, I did not know it worked that way
username: puppy-eloix
passwd: linuxlinux

hope this finally helps

abu_ilya

User avatar
Barkin
Posts: 803
Joined: Fri 12 Aug 2011, 04:55

#28 Post by Barkin »

abu_ilya wrote:Can you attach a sound sample pronouncing that? I can use it to replace the initial puppy-linux barking
I did say "electro pup" but it's come out more like "electric pup" (WAV file in ZIP attached) ....

User avatar
inoxidabile
Posts: 148
Joined: Sat 13 Sep 2008, 12:37

#29 Post by inoxidabile »

Thank You very much :)
Finally I got it and it runs fine ! :D

Great... :D :D :D a good job !

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#30 Post by darkcity »

thanks for taking the time to re-up, I'm downloading now ; -)

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

#31 Post by abu_ilya »

inoxidabile wrote:Thank You very much :)
Finally I got it and it runs fine ! :D

Great... :D :D :D a good job !
I'm glad it finally worked. If you have any questions about how to use the programs on it, or need examples..., just ask

regards,
abu_ilya

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

#32 Post by abu_ilya »

Barkin wrote:
abu_ilya wrote:Can you attach a sound sample pronouncing that? I can use it to replace the initial puppy-linux barking
I did say "electro pup" but it's come out more like "electric pup" (WAV file in ZIP attached) ....
nice, could you do something similar with:
'Ohm-My-Dawg'

Do you know _where_ to put the sound sample so it plays when starting up?

regards,
abu_ilya

User avatar
RetroTechGuy
Posts: 2947
Joined: Tue 15 Dec 2009, 17:20
Location: USA

Re: What does it & they do? (puppy-eloix) (part2)

#33 Post by RetroTechGuy »

abu_ilya wrote: 7. Eagle 5.6.0
This is a freeware version of a PCB-design package which is very popular in Europe (certainly in Germany). The free version is limited to half a eurocard (16cm*10cm) and two layers for routing. Keeping in mind we do a lot with smd's these days these limitations are most of the time no problem at all.
BTW, for those who haven't used it, EAGLE Rocks! If you wanted a professional tool, it's a good one to try (it's free for home users/non-profits -- what's a non profit? If you use it to make money, you're not non-profit -- but $50 gets you in the door with a basic registration).

You'll pay a lot more money to get any other CAD that works anywhere near as well.
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

Re: What does it & they do? (puppy-eloix) (part2)

#34 Post by abu_ilya »

RetroTechGuy wrote:
abu_ilya wrote: 7. Eagle 5.6.0
This is a freeware version of a PCB-design package which is very popular in Europe (certainly in Germany). The free version is limited to half a eurocard (16cm*10cm) and two layers for routing. Keeping in mind we do a lot with smd's these days these limitations are most of the time no problem at all.
BTW, for those who haven't used it, EAGLE Rocks! If you wanted a professional tool, it's a good one to try (it's free for home users/non-profits -- what's a non profit? If you use it to make money, you're not non-profit -- but $50 gets you in the door with a basic registration).

You'll pay a lot more money to get any other CAD that works anywhere near as well.
Right you are, and what's great too is that it runs natively under Linux!

abu_ilya

User avatar
Barkin
Posts: 803
Joined: Fri 12 Aug 2011, 04:55

#35 Post by Barkin »

abu_ilya wrote:Do you know _where_ to put the sound sample so it plays when starting up?
"2barks.wav", in puppy-reference, audio is the start-up sound, I think, [ for some reason there is another copy of "2barks" but in AU format in the same directory]
Attachments
puppy sounds.png
(8.59 KiB) Downloaded 519 times
Last edited by Barkin on Fri 08 Jun 2012, 19:52, edited 1 time in total.

User avatar
RetroTechGuy
Posts: 2947
Joined: Tue 15 Dec 2009, 17:20
Location: USA

Re: What does it & they do? (puppy-eloix) (part2)

#36 Post by RetroTechGuy »

abu_ilya wrote:
RetroTechGuy wrote:
abu_ilya wrote: 7. Eagle 5.6.0
This is a freeware version of a PCB-design package which is very popular in Europe (certainly in Germany). The free version is limited to half a eurocard (16cm*10cm) and two layers for routing. Keeping in mind we do a lot with smd's these days these limitations are most of the time no problem at all.
BTW, for those who haven't used it, EAGLE Rocks! If you wanted a professional tool, it's a good one to try (it's free for home users/non-profits -- what's a non profit? If you use it to make money, you're not non-profit -- but $50 gets you in the door with a basic registration).

You'll pay a lot more money to get any other CAD that works anywhere near as well.
Right you are, and what's great too is that it runs natively under Linux!

abu_ilya
I started using it about 15 years ago. I always suspected that it was originally native under Linux, and later compiled for Windows...
[url=http://murga-linux.com/puppy/viewtopic.php?t=58615]Add swapfile[/url]
[url=http://wellminded.net63.net/]WellMinded Search[/url]
[url=http://puppylinux.us/psearch.html]PuppyLinux.US Search[/url]

User avatar
Barkin
Posts: 803
Joined: Fri 12 Aug 2011, 04:55

#37 Post by Barkin »

abu_ilya wrote: could you do something similar with:
'Ohm-My-Dawg'
You did ask (but hearing a pun repeatedly is going to get annoying)...

abu_ilya
Posts: 71
Joined: Thu 08 May 2008, 13:59

#38 Post by abu_ilya »

Barkin wrote:
abu_ilya wrote: could you do something similar with:
'Ohm-My-Dawg'
You did ask (but hearing a pun repeatedly is going to get annoying)...
thanks, I'll see which one I'll put on the next version

abu_ilya

mini-jaguar
Posts: 597
Joined: Thu 13 Nov 2008, 13:45

#39 Post by mini-jaguar »

I have tried to download it using every single link in this thread, in some cases the same link several times. None of them work.

cthisbear
Posts: 4422
Joined: Sun 29 Jan 2006, 22:07
Location: Sydney Australia

#40 Post by cthisbear »

Working in OZ

Download (428.4 MB)...from this site..

http://i.minus.com/1339111263/1gldZTsxr ... ix3.15.iso

I just did a quick save...and then cancelled it.

Chris.

Post Reply