Fatdog64-600 Final and 601 (July 2012)

A home for all kinds of Puppy related projects
Message
Author
User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#201 Post by smokey01 »

Has anyone managed to compile the latest Filezilla for Fatdog-601?

It needs xwWidgets to be installed. So when I try to compile that I get more problems.

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#202 Post by jamesbond »

barburo wrote:but FD601 just hangs - it finds and identifies the vmlinuz file, but just hangs on initrd..
Since you use grub, do you ever get to see the message of initrd being loaded? If not, then like rcrsn51 said it's probably because of your laptop doesn't support big initrd.
rcrsn51 wrote:I don't know if there is a small-initrd release for 601.
There isn't one yet, but I'll make one for the seamonkey iso.

EDIT: 601-small-initrd is now available in the mirrors:
- http://puppy-linux.org/fatdog64/ (thanks to Q5sys)
- http://www.smokey01.com/jamesbond/fatdog64/ (thanks to smokey01).
duke93535 wrote:corrected one line about #391 for the pager styles foreground
Thank you, fixed.
duke93535 wrote:blinky_tray-0.8.1 is from here: http://ftp.nluug.nl/ftp/pub/os/Linux/di ... /source/b/
You can also get blinky from jwm_applets pet.
smokey01 wrote:Has anyone managed to compile the latest Filezilla for Fatdog-601?

It needs xwWidgets to be installed. So when I try to compile that I get more problems.
I haven't tried that. Did you use the wxWidgets from the package repo, or did you roll up your own?
Last edited by jamesbond on Sat 28 Jul 2012, 13:42, edited 1 time in total.
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#203 Post by smokey01 »

jamesbond wrote:
smokey01 wrote:Has anyone managed to compile the latest Filezilla for Fatdog-601?

It needs xwWidgets to be installed. So when I try to compile that I get more problems.
I haven't tried that. Did you use the wxWidgets from the package repo, or did you roll up your own?
I did try to roll my own but I was unsuccessful.

I then tried the ones in the repo but had no luck either. When compiling filezilla during the ./configure process the xwwidgets could not be found after both pets were installed.

CatDude was working on it too so I'm not sure what progress he has made.

I really like filezilla as it lets you copy between directories on websites, something gFTP can't do.

Regards

maddmike
Posts: 14
Joined: Tue 17 Jun 2008, 20:03

Taskbar icons

#204 Post by maddmike »

Fatdog 600 works great for me. There is just one weird problem I've found. The taskbar entries for open windows don't show the icons for each application; they all look the same. Screenshot attached.

Does anyone else have this behavior? Does anyone know how to solve it? I've seen the same thing on two PCs with every version of Fatdog I've tried, which goes back to 500.

Thanks.
[/img]

User avatar
Barburo
Posts: 298
Joined: Thu 14 Jun 2007, 18:49

#205 Post by Barburo »

Thanks to rcrsn51 and jamesbond.
The fd600 version with a small initrd did work for me - I was unaware of that option. Thanks again.
B.
[i]Laptop[/i]: Acer Aspire 5810TZ

User avatar
DC
Posts: 360
Joined: Sun 30 Apr 2006, 15:07
Location: Maidenhead, England

proverbial DVB

#206 Post by DC »

Hi J & K,

Whilst testing DVB with my old twinhan I found the file "dvb-usb-dibusb-5.0.0.11.fw" was missing. I'd just like to know was it left out / old /not required etc.

FYI I found the file in Fatdog 511 and it works fine.

dc
a little bit of knowledge and I'm dangerous

WillM
Posts: 173
Joined: Wed 30 Dec 2009, 04:42
Location: Oakland, California

#207 Post by WillM »

Hi madmike,

Lxpanel-0.5.9 in the Fatdog64-600 repository will display program icons in the taskbar. It will also change the main menu icons.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: unused disk space

#208 Post by rcrsn51 »

timothyli wrote:My favourite feature is the ability to boot the iso directly from grub.

title fatdog64
kernel /memdisk iso
initrd /Fatdog64-600-firefox.iso
rcrsn51 wrote:I wonder if memdisk is less demanding. I believe that this is a fairly new feature in syslinux.
I finally tested this using an ext3 hard drive partition. I copied memdisk out of FD600 from /usr/share/syslinux and booted with legacy GRUB. It worked fine.

[Edit] For people using the GRUB2 bootable flash drive method, this should work:

Code: Select all

menuentry "Fatdog ISO" {
 loopback loop /Fatdog64-601-Firefox.iso
 linux (loop)/vmlinuz
 initrd (loop)/initrd
}

Fishy
Posts: 234
Joined: Fri 27 Jan 2006, 01:22

Transmission

#209 Post by Fishy »

Fatdog is working flawlessly with the exception of Firefox occasionally shutting down on its own.

Wondering if there is an up-dated transmission compatible with the over-sized dog? :lol:

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#210 Post by jamesbond »

smokey01 wrote:I then tried the ones in the repo but had no luck either. When compiling filezilla during the ./configure process the xwwidgets could not be found after both pets were installed.
Ah, I see. That's because FileZilla requires that wxWidgets is compiled with unicode, the one in the repo isn't.
DC wrote:Whilst testing DVB with my old twinhan I found the file "dvb-usb-dibusb-5.0.0.11.fw" was missing. I'd just like to know was it left out / old /not required etc.
Not sure. Linux-firmware doesn't seem to have a copy of that file anymore. Does your DVB work without it? If not, I'll try to find that in my old copy of 511, or better yet, send me that file and I'll put it in. If you do, tell me which directory I need to put it in, too. Thanks.
rcrsn51 wrote:I wonder if memdisk is less demanding. I believe that this is a fairly new feature in syslinux.
Yes, because when it loads stuff to memory it can assure that they are all contiguous. Glad to see it work.
Fishy wrote:Wondering if there is an up-dated transmission compatible with the over-sized dog?
Not that I know of, still waiting for volunteer ... :wink:
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#211 Post by smokey01 »

Jamesbond,

CatDude managed to get FileZilla 3.5.2 working. It is the previous version and one that plinej had compiled. It needed some work but it works fine.

It can be found here:
Http://www.smokey01.com/software/Fatdog64-600

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#212 Post by 01micko »

jamesbond wrote:
Fishy wrote:Wondering if there is an up-dated transmission compatible with the over-sized dog?
Not that I know of, still waiting for volunteer ... :wink:
If I get some time tomorrow I might take a look. Many torrent sites now only offer magnet links which don't work in older transmission versions. Also you need to tweak seamonkey/firefox settings, I wrote something about it somewhere :roll:
Puppy Linux Blog - contact me for access

Fishy
Posts: 234
Joined: Fri 27 Jan 2006, 01:22

Re Transmission

#213 Post by Fishy »

I tried to make a pup that would work but my skills only are to the level of screwing up the pup. :lol:

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#214 Post by rcrsn51 »

Here is the 64-bit version of PeasyPort for Fatdog. The release notes are here.
Attachments
peasyport_fd600-1.7.pet
Updated 2012-08-22
(12.78 KiB) Downloaded 230 times
Last edited by rcrsn51 on Wed 22 Aug 2012, 11:33, edited 5 times in total.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

Re: Re Transmission

#215 Post by 01micko »

Fishy wrote:I tried to make a pup that would work but my skills only are to the level of screwing up the pup. :lol:
:lol:

Anyways .. here it is:

Transmission

transmission-2.60-x86_64.pet 752k .. (I love this xz compression!)

Note, 2.60 is the last version that compiles against gtk+-2.0 (4th July, 2012, so still recent). I guess these developers are going to force us into gtk 3 one day eh? :roll:

REQUIRES:

libevent

libevent-2.0.19-stable-x86_64.pet 161k

-----------------------------------------------------------------------------------

Sundries

dev, doc and nls are in this folder


-----------------------------------------------------------------------------------

Appendix

You will likely need to set up Firefox or Seamonkey to recognise the magnet protocol as many links to torrents are now magnet links. Ordinary .torrent files are unaffected by this procedure.
In about:config add the following as a new bool:

network.protocol-handler.expose.magnet

Set it's initial value to false.
https://wiki.archlinux.org/index.php/Fi ... ssociation

When you try a magnet link Firefox/Seamonkey will pop up a box asking you what program you want to open the link with. Navigate with the file selector to /usr/bin/transmission-gtk then click open. Transmission will open where you can set your download folder and start downloading the torrent. Tested working. :)


-------------------------------------------------------------------------------------

Have fun!
Puppy Linux Blog - contact me for access

Fishy
Posts: 234
Joined: Fri 27 Jan 2006, 01:22

Thanks

#216 Post by Fishy »

Transmission & magnetic links etc. are now working well thanks to your efforts.

Greatly appreciated. :D

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#217 Post by Q5sys »

i posted truecrypt 7.1a here

it 'should' work in FatDog. Anyone want to test for me as im away from my house where my fatdog machine is.

make sure to turn off kernel crypto services in TC before trying to mount something.
Last edited by Q5sys on Mon 06 Aug 2012, 01:42, edited 2 times in total.

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#218 Post by smokey01 »

When playing in the sandbox and accidentally closing the terminal window without typing exit, is there another way to exit the sandbox without rebooting?

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#219 Post by smokey01 »

Here is Password Gorilla. It's a password database, not too bad.

http://www.smokey01.com/software/Fatdog ... 3-fd64.pet

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#220 Post by jamesbond »

01micko, Thanks for stepping up and provided the transmission. I'll get it in to the repo.

Q5Sys, I haven't tested it yet, lotsa stuff to take care these days :roll: I'll do that as soon as I can.
smokey01 wrote:When playing in the sandbox and accidentally closing the terminal window without typing exit, is there another way to exit the sandbox without rebooting?
Technically speaking, you exit the sandbox as soon as you close the terminal window., so there is no harm there. The problem is that when the sandbox starts up, it performs a few mounts (that's all it does, actually), and if you just close the terminal these mounts remain (poor script, I know) --- and these mounts prevent future sandbox to start until the system is rebooted.

What we can do about this:
- fix the sandbox script so that it automatically unmounts stuff when it is killed, or
- create a script to do the necessary cleanup in case the sandbox is accidentally killed.

cheers!
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

Post Reply