How to use Radeon All in Wonder 9200 TV tuner?

Problems and successes with specific brands/models of computer video hardware
Post Reply
Message
Author
User avatar
Smithy
Posts: 1151
Joined: Mon 12 Dec 2011, 11:17

How to use Radeon All in Wonder 9200 TV tuner?

#1 Post by Smithy »

This is the original xorg conf file after installing xorg high pet:

Code: Select all

#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
#    Load        "freetype"

# This loads xtrap extension, used by xrandr
#   Load       "xtrap"

# This loads the GLX module (if present). xorg 7.4/5 need explicit disable to disable...
    Load    "glx" #LOADGLX

# This loads dri module (if present). 7.4 loads it by default, have to disable...
   Load       "dri" #LOADDRI
#    Disable "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font paths to be set
# **********************************************************************

Section "Files"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath   "/usr/share/X11/fonts/misc/"
    FontPath   "/usr/share/X11/fonts/Type1/"
    FontPath   "/usr/share/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

    Option "RandR" "on"

# With this, Xorg won't talk to HAL to add evdev devices and you'll be back
# with the old Xorg behavior (pre-7.4)...

    Option "AutoAddDevices" "false"

# For no-Hal, kirk also suggests this...

#    Option "AllowMouseOpenFail" "true"

# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default...

    Option "DontZap" "false"

EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "gb" #xkeymap0
EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...


#PuppyHardwareProfile=ATI_RADEON_9200VA1916wSERIE
I then added these lines to the xorg conf file, and uncommented just one of the lines:
ENABLE PAGE FLIP and ENABLED IT. Then rebooted.

Code: Select all

Section "Device"
    Identifier "Radeon"
    Driver "radeon"
#    Option	"AGPMode"               "8"   #not used when KMS is on
#	Option	"AGPFastWrite"          "off" #could cause instabilities enable it at your own risk
#	Option	"SWcursor"              "off" #software cursor might be necessary on some rare occasions, hence set off by default
	Option	"EnablePageFlip"        "on"  #supported on all R/RV/RS4xx and older hardware and set off by default
#	Option	"AccelMethod"           "EXA" #valid options are XAA and EXA. EXA is the newest acceleration method and it is the default.
#	Option	"RenderAccel"           "on"  #enabled by default on all radeon hardware
#	Option	"ColorTiling"           "on"  #enabled by default on RV300 and later radeon cards.
#	Option	"EXAVSync"              "off" #default is off, otherwise on
#	Option	"EXAPixmaps"            "on"  #when on icreases 2D performance, but may also cause artifacts on some old cards
#	Option	"AccelDFS"              "on"  #default is off, read the radeon manpage for more information
EndSection
On the reboot I checked GLX GEARS, and it had shot up by 3500 frames, and suddenly all this NEW information has appeared in "DEVICE SECTION" of xorg conf:

Code: Select all

#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
#    Load        "freetype"

# This loads xtrap extension, used by xrandr
#   Load       "xtrap"

# This loads the GLX module (if present). xorg 7.4/5 need explicit disable to disable...
    Load    "glx" #LOADGLX

# This loads dri module (if present). 7.4 loads it by default, have to disable...
   Load       "dri" #LOADDRI
#    Disable "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font paths to be set
# **********************************************************************

Section "Files"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath   "/usr/share/X11/fonts/misc/"
    FontPath   "/usr/share/X11/fonts/Type1/"
    FontPath   "/usr/share/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

    Option "RandR" "on"

# With this, Xorg won't talk to HAL to add evdev devices and you'll be back
# with the old Xorg behavior (pre-7.4)...

    Option "AutoAddDevices" "false"

# For no-Hal, kirk also suggests this...

#    Option "AllowMouseOpenFail" "true"

# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default...

    Option "DontZap" "false"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...


Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbRules" "xorg"
	Option      "XkbModel" "pc102"
	Option      "XkbLayout" "us" #xkeymap0
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2" #mouse0protocol
	Option	    "Device" "/dev/mouse"
	#Option      "Emulate3Buttons"
	#Option      "Emulate3Timeout" "50"
	Option      "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "Monitor"
	#DisplaySize	  410   260	# mm
	Identifier   "Monitor0"
	VendorName   "VSC"
	ModelName    "VA1916wSERIES"
	Option	    "DPMS"
	HorizSync    24.0-82.0
	VertRefresh  50.0-71.0
	#UseModes     "Modes0" #monitor0usemodes
	Option      "PreferredMode" "1440x900"
	EndSection
	
Section "Modes"
	Identifier "Modes0"
	#modes0modeline0
EndSection

Section "Device"
	### Available Driver options are:-
	### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
	### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
	### [arg]: arg optional
	#Option     "NoAccel"            	# [<bool>]
	#Option     "SWcursor"           	# [<bool>]
	#Option     "Dac6Bit"            	# [<bool>]
	#Option     "Dac8Bit"            	# [<bool>]
	#Option     "BusType"            	# [<str>]
	#Option     "CPPIOMode"          	# [<bool>]
	#Option     "CPusecTimeout"      	# <i>
	#Option     "AGPMode"            	"8"
	#Option     "AGPFastWrite"       	# [<bool>]
	#Option     "AGPSize"            	# <i>
	#Option     "GARTSize"           	# <i>
	#Option     "RingSize"           	# <i>
	#Option     "BufferSize"         	# <i>
	#Option     "EnableDepthMoves"   	# [<bool>]
	 Option     "EnablePageFlip"     	"on"
	#Option     "NoBackBuffer"       	# [<bool>]
	#Option     "DMAForXv"           	# [<bool>]
	#Option     "FBTexPercent"       	# <i>
	#Option     "DepthBits"          	# <i>
	#Option     "PCIAPERSize"        	# <i>
	#Option     "AccelDFS"           	# [<bool>]
	#Option     "IgnoreEDID"         	# [<bool>]
	#Option     "CustomEDID"         	# [<str>]
	#Option     "DisplayPriority"    	# [<str>]
	#Option     "PanelSize"          	# [<str>]
	#Option     "ForceMinDotClock"   	# <freq>
	#Option     "ColorTiling"        	# [<bool>]
	#Option     "VideoKey"           	# <i>
	#Option     "RageTheatreCrystal" 	# <i>
	#Option     "RageTheatreTunerPort" 	# <i>
	#Option     "RageTheatreCompositePort" 	# <i>
	#Option     "RageTheatreSVideoPort" 	# <i>
	#Option     "TunerType"          	# <i>
	#Option     "RageTheatreMicrocPath" 	# <str>
	#Option     "RageTheatreMicrocType" 	# <str>
	#Option     "ScalerWidth"        	# <i>
	#Option     "RenderAccel"        	"on"
	#Option     "SubPixelOrder"      	# [<str>]
	#Option     "ShowCache"          	# [<bool>]
	#Option     "ClockGating"        	# [<bool>]
	#Option     "VGAAccess"          	# [<bool>]
	#Option     "ReverseDDC"         	# [<bool>]
	#Option     "LVDSProbePLL"       	# [<bool>]
	#Option     "AccelMethod"        	# <str>
	#Option     "DRI"                	# [<bool>]
	#Option     "ConnectorTable"     	# <str>
	#Option     "DefaultConnectorTable" 	# [<bool>]
	#Option     "DefaultTMDSPLL"     	# [<bool>]
	#Option     "TVDACLoadDetect"    	# [<bool>]
	#Option     "ForceTVOut"         	# [<bool>]
	#Option     "TVStandard"         	# <str>
	#Option     "IgnoreLidStatus"    	# [<bool>]
	#Option     "DefaultTVDACAdj"    	# [<bool>]
	#Option     "Int10"              	# [<bool>]
	#Option     "EXAVSync"           	# [<bool>]
	#Option     "ATOMTVOut"          	# [<bool>]
	#Option     "R4xxATOM"           	# [<bool>]
	#Option     "ForceLowPowerMode"  	# [<bool>]
	#Option     "DynamicPM"          	# [<bool>]
	#Option     "NewPLL"             	# [<bool>]
	#Option     "ZaphodHeads"        	# <str>
	Identifier  "Card0"
	Driver      "radeon" #card0driver
	VendorName  "ATI Technologies Inc"
	BoardName   "RV280 [Radeon 9200]"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24
	#Option         "metamodes" "1440x900_60 +0+0" #METAMODES_0
	Subsection "Display"
		Depth       24
		Modes       "1440x900"
	EndSubsection
EndSection

#PuppyHardwareProfile=ATI_RADEON_9200VA1916wSERIE
How can I get the tuner portion functioning? Xine Player seems to think there is something going on now, but it is confused..
BTW it is an all in wonder 9200.

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#2 Post by darkcity »

some people are recommending TvTime
http://tvtime.sourceforge.net/

are you using Music2go Puppy?

User avatar
Smithy
Posts: 1151
Joined: Mon 12 Dec 2011, 11:17

#3 Post by Smithy »

darkcity wrote:some people are recommending TvTime
http://tvtime.sourceforge.net/

are you using Music2go Puppy?
I am darkcity, incidentally, I tried out this game Lugaru as a test:

http://208.109.22.214/puppy/viewtopic.p ... 3d18947f37

and the frame rate is really good, didn't have to add any of the libs, so I guess opengl is working. Have to re X to 1024x768 tho', or it crawls, and then the screen goes a funny faded green look to it, don't know what that problem is, but the rabbit runs like the clappers and does some mean karate kicks!


So if i find a tv time pet, will it just work or do I have to do the nuclear scientist stuff with xorg and whatever else (modules?) it needs?
Actually I better answer that question by trying it..

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#4 Post by darkcity »

this thread may be of interest
http://www.murga-linux.com/puppy/viewtopic.php?t=64096
screen goes a funny faded green look to it
that could be because your using 16bit instead 24bit, on xorg wizard you can choose-

1024x768x16
or
1024x768x24

rabbit runs like the clappers and does some mean karate kicks!
no need for tv then ; -)

might be worth trying on fresh install.

User avatar
Smithy
Posts: 1151
Joined: Mon 12 Dec 2011, 11:17

#5 Post by Smithy »

It is a fresh install every time, from a usb stick, no save file, just the xorghigh built in.
Then I try that code, notice video for linux then appears in modules loaded.
Yes, the faded green is because I set it to 16 bit, thanks for that.
Weird that it can't display correctly at 16 bit. Everything runs faster at this bit rate. The playback meters on qtractor+podium are going as fast as windows now as far as I can tell in this mode.
Is linux a resource pig?

TV Time after being installed appears after I put the code in and restart X.
It says no signal. No video device.
No such device or address.
Cannot open capture device /dev/video0.

Could be wrong, but I think I need to "fill in" the answers to these sections in the code below. Wonder what the heck Zaphodheads is, sounds like a band.



Code: Select all

Section "Device"
   ### Available Driver options are:-
   ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
   ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
   ### [arg]: arg optional
   #Option     "NoAccel"               # [<bool>]
   #Option     "SWcursor"              # [<bool>]
   #Option     "Dac6Bit"               # [<bool>]
   #Option     "Dac8Bit"               # [<bool>]
   #Option     "BusType"               # [<str>]
   #Option     "CPPIOMode"             # [<bool>]
   #Option     "CPusecTimeout"         # <i>
   #Option     "AGPMode"               "8"
   #Option     "AGPFastWrite"          # [<bool>]
   #Option     "AGPSize"               # <i>
   #Option     "GARTSize"              # <i>
   #Option     "RingSize"              # <i>
   #Option     "BufferSize"            # <i>
   #Option     "EnableDepthMoves"      # [<bool>]
    Option     "EnablePageFlip"        "on"
   #Option     "NoBackBuffer"          # [<bool>]
   #Option     "DMAForXv"              # [<bool>]
   #Option     "FBTexPercent"          # <i>
   #Option     "DepthBits"             # <i>
   #Option     "PCIAPERSize"           # <i>
   #Option     "AccelDFS"              # [<bool>]
   #Option     "IgnoreEDID"            # [<bool>]
   #Option     "CustomEDID"            # [<str>]
   #Option     "DisplayPriority"       # [<str>]
   #Option     "PanelSize"             # [<str>]
   #Option     "ForceMinDotClock"      # <freq>
   #Option     "ColorTiling"           # [<bool>]
   #Option     "VideoKey"              # <i>
   #Option     "RageTheatreCrystal"    # <i>
   #Option     "RageTheatreTunerPort"    # <i>
   #Option     "RageTheatreCompositePort"    # <i>
   #Option     "RageTheatreSVideoPort"    # <i>
   #Option     "TunerType"             # <i>
   #Option     "RageTheatreMicrocPath"    # <str>
   #Option     "RageTheatreMicrocType"    # <str>
   #Option     "ScalerWidth"           # <i>
   #Option     "RenderAccel"           "on"
   #Option     "SubPixelOrder"         # [<str>]
   #Option     "ShowCache"             # [<bool>]
   #Option     "ClockGating"           # [<bool>]
   #Option     "VGAAccess"             # [<bool>]
   #Option     "ReverseDDC"            # [<bool>]
   #Option     "LVDSProbePLL"          # [<bool>]
   #Option     "AccelMethod"           # <str>
   #Option     "DRI"                   # [<bool>]
   #Option     "ConnectorTable"        # <str>
   #Option     "DefaultConnectorTable"    # [<bool>]
   #Option     "DefaultTMDSPLL"        # [<bool>]
   #Option     "TVDACLoadDetect"       # [<bool>]
   #Option     "ForceTVOut"            # [<bool>]
   #Option     "TVStandard"            # <str>
   #Option     "IgnoreLidStatus"       # [<bool>]
   #Option     "DefaultTVDACAdj"       # [<bool>]
   #Option     "Int10"                 # [<bool>]
   #Option     "EXAVSync"              # [<bool>]
   #Option     "ATOMTVOut"             # [<bool>]
   #Option     "R4xxATOM"              # [<bool>]
   #Option     "ForceLowPowerMode"     # [<bool>]
   #Option     "DynamicPM"             # [<bool>]
   #Option     "NewPLL"                # [<bool>]
   #Option     "ZaphodHeads"           # <str>
   Identifier  "Card0"
   Driver      "radeon" #card0driver
   VendorName  "ATI Technologies Inc"
   BoardName   "RV280 [Radeon 9200]"
   BusID       "PCI:1:0:0"
EndSection 

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#6 Post by darkcity »

according to

http://www.murga-linux.com/puppy/viewto ... 026#490026

a channels.conf file needs setting up?

---

Good point about "16bit mode not working"
http://bkhome.org/blog/?viewDetailed=01503
---

Zaphodheads could be an alien race?

:)

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#7 Post by darkcity »

Confirmed error with

X Org 1.7.6
ATI Technologies Radeon RV100 QY [Radeon 7000/VE]

set via ALSA wizard
(havent tried manual edit yet)

:arrow:

User avatar
Smithy
Posts: 1151
Joined: Mon 12 Dec 2011, 11:17

#8 Post by Smithy »

You're a gold mine of old threads darkcity, that project by Synth that never materialised had a link by Lobster to a great little on the fly mp3 editor.

Checked the Barry K vs Playdayz 16 bit greenish screen post. Will attempt that tip shortly.

Could do with a Zaphodhead to give me a hand with the videocard :P

Edit: Strange, I went into Xorg through the screen that looks like old msdos screen without adding any of that new "device section" code, and now I can see all those options already there.
And yet if I look at the xorg.conf in Geany they are not there.

Post Reply