Slacko 5.4 - FINAL 2 Dec 2012

News, happenings
Message
Author
LateAdopter
Posts: 361
Joined: Fri 27 May 2011, 17:21
Location: Reading UK

#41 Post by LateAdopter »

01micko
I have what i thought was a reasonably new radeon but it is low end, kernel modesetting does not work with it.
Have you tried your Radeon card with fatdog64 600?

With my RS880G, which is a 3 or 4 year old design, the Xorg R600g driver, in FD64, does DRI2, KMS and 3D acceleration perfectly. The R600g plus Evergreen should work too.

The R600g requires KMS because it no longer has userspace modesetting, I think it happened when Gallium 3D was merged last year.

Kirk and jamesbond seem to have got the kernel sorted.

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#42 Post by Jim1911 »

01micko wrote:Jim, I don't know why your logitech wireless setup isn't loading but I suspect it's something to do with rerwin's fix. Can you install rerwin's pet and reboot please?
I'll have to fix the desktemplates since I have removed slickpet.

----------------------------------------------------------------------------------------------
upon startup, unplugging and plugging in the logitech receiver did connect the mouse. However, after installing rerwin's pet I see no change. Rebooting after pet installation, unplugging and plugging in the logitech receiver is still necessary to connect the mouse.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#43 Post by 01micko »

Jim1911 wrote:upon startup, unplugging and plugging in the logitech receiver did connect the mouse. However, after installing rerwin's pet I see no change. Rebooting after pet installation, unplugging and plugging in the logitech receiver is still necessary to connect the mouse.
Ok, you have the keyboard too right? It depends on the same receiver? I gather that is working so it looks to me like a driver bug in the kernel. The next will have a later kernel for testing, when I solve this intel thing.

Cheers
Puppy Linux Blog - contact me for access

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#44 Post by Jim1911 »

01micko wrote:
Jim1911 wrote:upon startup, unplugging and plugging in the logitech receiver did connect the mouse. However, after installing rerwin's pet I see no change. Rebooting after pet installation, unplugging and plugging in the logitech receiver is still necessary to connect the mouse.
Ok, you have the keyboard too right? It depends on the same receiver? I gather that is working so it looks to me like a driver bug in the kernel. The next will have a later kernel for testing, when I solve this intel thing.

Cheers
Keyboard is usb, only the mouse is wireless.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#45 Post by 01micko »

Ok, sorry about that Jim, looks like the next version will ship with k3.5.1 anyway as I have intel booting and running with KMS!

With KMS enabled in the kernel, my eee-701-Sd boots to no X, but this happens all the time on that thing for me even in Lupu. Running xorgwizard and I get a nice desktop with intel xorg driver.
It's a 915GM/GMS/915MS Express Graphics Controller (rev 02)

The other intel which I thought was 945 intel is actually :
Cantiga Graphics Controller (rev 07), using intel driver. (Now called "Ark" ...GM45)

The third victim is my trusty old Brookdale, which has served me really well for years. The graphics chip is known to be flakey on those things, we had to jump through hoops (charlie6, MHHP, cowboy, rerwin) to get the thing going in 530 with k2.6.37.6.
Intel Corporation 82845G/GL [Brookdale - G] Chipset Integrated Graphics Device (rev 01) using intel driver. Boots straight to desktop.EDIT: I think the kernel devs have finally got KMS right! Fullscreen flash plays almost perfect on the the Brooky. A first. Formerly played ok in a window but fullscreen was quite choppy.

Interestingly, on all 3, glxgears reports real garbage numbers, around 300 f/5secs (60fps), but I think that is to do with glxgears and not the performance. I'll do some more tests later, but I might ship this one, after a little bit of tidy up. Gets big though with mesa included it's over 150M :shock: .

I'll probably ship with KMS turned off by default for Radeon, you can turn it on later easy enough.

Going by the xorg wiki, all intels except old i810's and i815's are KMS supported in the kernel (since 3.5). For the older ones, hopefully the i915.modeset=0 kernel line string should be ok.
Puppy Linux Blog - contact me for access

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Slacko - next cycle -alpha

#46 Post by Billtoo »

I downloaded,burned,and installed slackware 14 rc to my acer desktop.
Computer
Processor 4x Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Memory 5987MB (306MB used)
Operating System Slackware 14.0
User Name Bill (Unknown)
Date/Time Mon 13 Aug 2012 07:29:47 PM EDT
Display
Resolution 1920x1080 pixels
OpenGL Renderer Mesa DRI Intel(R) Ironlake Desktop x86/MMX/SSE2
X11 Vendor The X.Org Foundation
Operating System
Version
Kernel Linux 3.2.26-smp (i686)
Compiled #2 SMP Tue Aug 7 15:22:26 CDT 2012
C Library GNU C Library version 2.15 (stable)
Default C Compiler GNU C Compiler version 4.7.1 (GCC)
Distribution Slackware 14.0
Display
Resolution 1920x1080 pixels
Vendor The X.Org Foundation
Version 1.12.3
OpenGL
Vendor Tungsten Graphics, Inc
Renderer Mesa DRI Intel(R) Ironlake Desktop x86/MMX/SSE2
Version 2.1 Mesa 8.0.4
Direct Rendering Yes

It was a large download + updating packages with slackpkg for another
large download but it's working great so far.

I'm looking forward to the next slacko too :)

EDIT: The nexuiz screenshot is from a slackware 14 install on a dual core computer using the nouveau driver which works better than the proprietary nvidia driver imo.
Attachments
snapshot4.jpg
(169.8 KiB) Downloaded 1953 times
Slackware14rc.jpg
(112.3 KiB) Downloaded 2126 times

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#47 Post by darkcity »

Hi

I too get the black screen after xwin starts, ctrl-alt-backspace doesn't work - using USB keyboard and from pressing caps-lock it looks like there is no response.

Got it to work by adding pfix=nox, then using xorgwizard to select Vesa instead of Xorg. Xorg still no good with mesa-8.04.

In the Puppy Package I can only select slackware packages.

---

The latest stable AbiWord is 2.8.6, any reason why 2.9.1 is packaged with Slacko?

---

No soundcards detected (worked on 531)

I take it your using ALSA 1.0.25 - nice one.

this is the output from alsawizard

Code: Select all

Getting started...
Building card database, please wait...
/usr/sbin/alsaconf: line 479: /lib/modules/3.2.26-4g/modules.pcimap: No such file or directory
/usr/sbin/alsaconf: line 479: /lib/modules/3.2.26-4g/modules.isapnpmap: No such file or directory
...no device found
---

Everything else seems to be working fine - using frisbee for wireless.

---

Is startmount included?

---
manual frugal install to harddrive

Code: Select all

-PCI Devices-
Host bridge		: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub 
PCI bridge		: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port 
VGA compatible controller		: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller 
Display controller		: Intel Corporation 82915G Integrated Graphics Controller 
PCI bridge		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
PCI bridge		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
USB Controller		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
USB Controller		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
USB Controller		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
USB Controller		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
USB Controller		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
PCI bridge		: Intel Corporation 82801 PCI Bridge 
Multimedia audio controller		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
ISA bridge		: Intel Corporation 82801FB/FR 
IDE interface		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
IDE interface		: Intel Corporation 82801FB/FW 
SMBus		: Intel Corporation 82801FB/FBM/FR/FW/FRW 
Multimedia audio controller		: Creative Labs CA0106 Soundblaster
Network controller		: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller 
Ethernet controller		: Broadcom Corporation BCM4401 100Base-T 
Under summary multimedia device = null ?
Attachments
newdo535.jpg
(52.6 KiB) Downloaded 1843 times

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#48 Post by bigpup »

From Adobe's website:
Quote:
Mozilla, Firefox, SeaMonkey (Flash Player 11.2 is the last supported Flash Player version for Linux. Adobe will continue to provide security updates.)
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

Increased number of SFS files

#49 Post by tlchost »

Hopefully with the maximum number of sfs files that can be loaded at boot will be increased, or an application that allows one to boot more than 6 would be helpful?

Is there a sfs combiner that works with Slacko on a USB?

Thom

Jasper

#50 Post by Jasper »

Hi tlchost,

If you have a frugal installation of Slacko you might like to take a backup of your save file and try seaside's load all sfs files in a directory at once
http://www.murga-linux.com/puppy/viewto ... 79&t=74471

Especially if the above works well you may also like Simple Menu from technosaurus which should show a full menu including sfs files very quickly.

I think 01micko said he is thinking about including JWM tools update (also from technosaurus, which looks very professional, shows sfs loads in its menu and is 15 times faster than JWM 'fixmenus').

PupMenu from radky will also show sfs loads (use the full screen "refresh" button or reload as needed). It has many other interesting and useful options.

My regards

rodin.s
Posts: 344
Joined: Wed 22 Sep 2010, 19:50
Location: Ukraine

pnethood, remasterpup

#51 Post by rodin.s »

I was making Russian remaster of this Slacko and found some bugs. I wanted to test pnethood after translation but I don't have any network to test so it should have displayed an error of no network, but it displays nothing. I fixed it by copying part of working script and pasting it into this one.
Mounted iso-image was not visible in remasterpup so I have applied my old fix, also xz compression is very slow on my PC so I guess it would be nice to have some dialog box with the choice of compression.
Also smaller mplayer pet in this thread is not only smaller but it works better. (No delay between video and sound on downloaded from YouTube clip: BBC Olympics Montage set to John Lennon's Imagine.flv.) Delay was in Racy-5.3 and on bigger Mplayer pet.
Attachments
forSlacko.tar.gz
pnethood and remasterpup2
(18.99 KiB) Downloaded 368 times

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#52 Post by darkcity »

which is the recommended version of vlc?

vlc 1.1.12 reported broken link.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#53 Post by 01micko »

Beta is out.

Should be a substantial improvement over alpha, I did plenty of tests on video in a variety of machines:
my test results wrote: These are video reports from all the hardware I have
except my main nvidia card, it always works anyway, same
with the onboard nvidia in the same box. (Athlon-X2)
I used Nexuiz, an open source 3D shooter introduced to
me by Billtoo to test real world graphics performance, not
scientifically, just either it works or not.
I also have my wife's macbook with nvidia, but that always
works perfectly so didn't test.
I used the "export vblank_mode=0" variable to get the
true glxgears reading in all cases.
-------------------------------------------------------------------------------
athlon-X2-cedar-radeon
# export vblank_mode=0 glxgears
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
8286 frames in 5.0 seconds = 1656.079 FPS
8317 frames in 5.0 seconds = 1663.123 FPS
8310 frames in 5.0 seconds = 1661.723 FPS
8319 frames in 5.0 seconds = 1663.523 FPS
# report-video
radeon
Slacko Puppy, version 5.3.5.3 on Sat 1 Sep 2012

Chip description:
0.0 VGA compatible controller
ATI Technologies Inc Cedar PRO [Radeon HD 5450]
oem: ATI ATOMBIOS
product: CEDAR 01.00

X Server: Xorg
Driver used: radeon

X.Org version: 1.12.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
RUNS Nexuiz just fine
---------------------------------------
brookdale-P4
# glxgears
413 frames in 5.0 seconds = 82.492 FPS
481 frames in 5.0 seconds = 96.029 FPS
461 frames in 5.0 seconds = 92.154 FPS
480 frames in 5.0 seconds = 95.988 FPS
# report-video
intel
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
2.0 VGA compatible controller
Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
oem: Brookdale-G Graphics Chip Accelerated VGA BIOS
product: Brookdale-G Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: intel

X.Org version: 1.12.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
incapable of running Nexuiz
---------------------------------------
celeron-2.4-SiS
# report-video
sis
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
0.0 VGA compatible controller
Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
oem: SiS
product:

X Server: Xorg
Driver used: sis

X.Org version: 1.12.3
dimensions: 1280x800 pixels (342x192 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
# glxgears
511 frames in 5.0 seconds = 102.193 FPS
558 frames in 5.0 seconds = 111.578 FPS
550 frames in 5.0 seconds = 109.841 FPS
564 frames in 5.0 seconds = 112.740 FPS
#
Actually runs Nexuiz, but a bit too slow to be playable \
NOTE: this machine has the Vanta card normally, Nexuiz starts but fails to fully
load with that, despite very good glxgears numbers whether vblank_mode is on or off.
Around 800 frames in 5.0 seconds.
---------------------------------------
compaq-CQ60-celeron
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
299 frames in 5.0 seconds = 59.790 FPS
298 frames in 5.0 seconds = 59.594 FPS
298 frames in 5.0 seconds = 59.595 FPS
# export vblank_mode=0
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
3214 frames in 5.0 seconds = 642.792 FPS
3226 frames in 5.0 seconds = 645.145 FPS
3237 frames in 5.0 seconds = 647.334 FPS
3230 frames in 5.0 seconds = 645.949 FPS
3238 frames in 5.0 seconds = 647.541 FPS
# report-video
intel
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
2.0 VGA compatible controller
Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
oem: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
product: Intel(r)Cantiga Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: intel

X.Org version: 1.12.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
Runs Nexuiz perfectly in native res
---------------------------------------
eee-701sd
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
300 frames in 5.0 seconds = 59.980 FPS
301 frames in 5.0 seconds = 60.006 FPS
# export vblank_mode=0
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
1177 frames in 5.0 seconds = 235.086 FPS
1189 frames in 5.0 seconds = 237.725 FPS
1167 frames in 5.0 seconds = 233.293 FPS
1190 frames in 5.0 seconds = 237.970 FPS
1185 frames in 5.0 seconds = 236.518 FPS
# report-video
intel
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
2.0 VGA compatible controller
Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: intel

X.Org version: 1.12.3
dimensions: 800x480 pixels (211x126 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
Nexuiz crashed, however this thing can run compiz just fine
---------------------------------------
hp-pavillion-g6
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.207 FPS
300 frames in 5.0 seconds = 59.881 FPS
300 frames in 5.0 seconds = 59.879 FPS
# export vblank_mode=0
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
16016 frames in 5.0 seconds = 3203.017 FPS
16787 frames in 5.0 seconds = 3357.346 FPS
16906 frames in 5.0 seconds = 3381.050 FPS
17336 frames in 5.0 seconds = 3467.010 FPS
17044 frames in 5.0 seconds = 3408.611 FPS
# report-video
intel
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
2.0 VGA compatible controller
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 0.0 VGA compatible controller
ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M]
oem: Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS
product: Intel(R)Sandybridge Mobile Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: intel

X.Org version: 1.12.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
Runs Nexuiz perfectly, I didn't have time to figure out how to get the radeon display to work
It's my son's new machine
---------------------------------------
ibm-thinkpad-r51-radeon
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
304 frames in 5.0 seconds = 60.644 FPS
# export vbalank_mode=0
# export vblank_mode=0
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
2073 frames in 5.0 seconds = 414.476 FPS
2065 frames in 5.0 seconds = 412.991 FPS
2067 frames in 5.0 seconds = 413.389 FPS
2074 frames in 5.0 seconds = 414.795 FPS
2074 frames in 5.0 seconds = 414.444 FPS
# report-video
radeon
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
0.0 VGA compatible controller
ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
oem: ATI MOBILITY RADEON 7500

X Server: Xorg
Driver used: radeon

X.Org version: 1.12.3
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
Nexuiz starts, but crashes.
---------------------------------------
See main post
Puppy Linux Blog - contact me for access

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#54 Post by James C »

Fresh manual frugal install of Slacko 5.3.5.3 "beta" on the trusty Athlon XP box. Sound,internet and display all working and correct on initial boot.


# report-video
nouveau
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2

X Server: Xorg
Driver used: nouveau

X.Org version: 1.12.3
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz

# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
1842 frames in 5.0 seconds = 368.365 FPS
2131 frames in 5.0 seconds = 426.080 FPS
2367 frames in 5.0 seconds = 473.295 FPS
2300 frames in 5.0 seconds = 459.849 FPS
2377 frames in 5.0 seconds = 475.356 FPS
2321 frames in 5.0 seconds = 464.152 FPS

-Display-
Resolution : 1440x900 pixels
Vendor : The X.Org Foundation
Version : 1.12.3
-Monitors-
Monitor 0 : 1440x900 pixels
-OpenGL-
Vendor : Nouveau
Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
Version : 1.2 Mesa 8.0.4
Direct Rendering : Yes


-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (199MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 31 Aug 2012 11:13:00 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#55 Post by 01micko »

James

Can you try export vblank_mode=0 then glxgears please? I am thinking that nouveau has progressed to the point that it is now better than the proprietary nvidia driver, at least on older cards anyway. It is on my Vanta.

TIA
Puppy Linux Blog - contact me for access

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#56 Post by James C »

Meanwhile, Slacko beta live pfix=ram on the old P4 test box.Sound,internet and display working and correct on boot.

# report-video
intel
Slacko Puppy, version 5.3.5.3 on Fri 31 Aug 2012

Chip description:
2.0 VGA compatible controller
Intel Corporation 82865G Integrated Graphics Controller (rev 02)
oem: Intel(r)865G Graphics Chip Accelerated VGA BIOS
product: Intel(r)865G Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: intel

X.Org version: 1.12.3
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
378 frames in 5.0 seconds = 75.424 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.142 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.144 FPS


-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 512MB (142MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 31 Aug 2012 11:25:26 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH4 - Intel ICH5

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#57 Post by James C »

Here it is on this box first...


# export vblank_mode=0
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
ATTENTION: default value of option vblank_mode overridden by environment.
1808 frames in 5.0 seconds = 361.473 FPS
1828 frames in 5.0 seconds = 365.469 FPS
1733 frames in 5.0 seconds = 346.466 FPS
1831 frames in 5.0 seconds = 365.922 FPS
1814 frames in 5.0 seconds = 362.523 FPS
1826 frames in 5.0 seconds = 364.920 FPS
1816 frames in 5.0 seconds = 362.937 FPS
2264 frames in 5.0 seconds = 452.780 FPS
2521 frames in 5.0 seconds = 504.050 FPS
2424 frames in 5.0 seconds = 484.782 FPS
2429 frames in 5.0 seconds = 485.695 FPS
2494 frames in 5.0 seconds = 498.684 FPS
2488 frames in 5.0 seconds = 497.096 FPS
2408 frames in 5.0 seconds = 481.491 FPS

Back in a minute from the other box.... :)

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#58 Post by James C »

01micko wrote:James

Can you try export vblank_mode=0 then glxgears please? I am thinking that nouveau has progressed to the point that it is now better than the proprietary nvidia driver, at least on older cards anyway. It is on my Vanta.

TIA

Regular....

Code: Select all

# glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
2092 frames in 5.0 seconds = 417.962 FPS
2298 frames in 5.0 seconds = 459.189 FPS
2241 frames in 5.0 seconds = 447.986 FPS
2254 frames in 5.0 seconds = 450.666 FPS
2236 frames in 5.0 seconds = 446.959 FPS
and then......

Code: Select all

# export vblank_mode=0 
# glxgears
ATTENTION: default value of option vblank_mode overridden by environment.
2569 frames in 5.0 seconds = 513.746 FPS
2586 frames in 5.0 seconds = 517.164 FPS
2765 frames in 5.0 seconds = 552.925 FPS
2597 frames in 5.0 seconds = 519.284 FPS
2617 frames in 5.0 seconds = 523.296 FPS
Results are a bit higher but for what it's worth the movement of the gears is much choppier and erratic.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#59 Post by 01micko »

Not much diff on the 440, you should see a substantial difference on the intel, as I did and with the radeons.

edit: you beat me! I don't really know what to make of any of that anyway! That's why I use the Nexuiz game as a benchmark. I'll have to look into the performance figures in that. It's a pretty big download though at ~900M, cross platform with mac and windows, but that extra stuff is only a few meg.
Puppy Linux Blog - contact me for access

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Slacko - next cycle -beta

#60 Post by Billtoo »

Manual frugal install to a 64gb flash drive.

Slacko Puppy, version 5.3.5.3 on Sat 1 Sep 2012

Chip description:
0.0 VGA compatible controller
ATI Technologies Inc RV530 [Radeon X1600]
oem: ATI ATOMBIOS
product: RV530 01.00

X Server: Xorg
Driver used: radeon

X.Org version: 1.12.3
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes

Computer
Processor AMD Athlon(tm) 64 Processor 3300+
Memory 1554MB (182MB used)

OpenGL
Vendor X.Org R300 Project
Renderer Gallium 0.4 on ATI RV530
Version 2.1 Mesa 8.0.4
Direct Rendering Yes

# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
299 frames in 5.0 seconds = 59.757 FPS
300 frames in 5.0 seconds = 59.886 FPS
300 frames in 5.0 seconds = 59.886 FPS

Google Earth works great, Nexuiz too, I went through level 1 with guns
blazing :)

It's time for bed here but will test more in the morning, looking
great so far.
Attachments
screenshot.jpg
(46.92 KiB) Downloaded 1150 times

Post Reply