Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 02 Sep 2014, 17:22
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Video
webcam Trust 16490
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 2 [25 Posts]   Goto page: 1, 2 Next
Author Message
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Mon 03 Sep 2012, 04:52    Post subject:  webcam Trust 16490  

I have the webcam Trust 16490.
I 'm trying to install it, but no luck up to now.
Did anybody have any luck with this camera?
I have puppy 5.28.

(I installed the file kernel_src_L4 (from Quickpet>Sfs Get).
Then, tried to install gspcav, wich contains drivers form many webcams, but the 'make' command gave me error.
I don't know if the kernel_src_L4-gspcav is the correct way, but that's what I found on internet.)
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9066
Location: Stratford, Ontario

PostPosted: Mon 03 Sep 2012, 11:43    Post subject:  

1. As a test, open a terminal and type the command
Code:
mplayer tv://

Does that activate the camera?

2. You need to determine the USB vendor:product ID codes. With the webcam NOT plugged in, type
Code:
lsusb

Then plug in the camera and type the command again. What are the codes?
Back to top
View user's profile Send private message 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Mon 03 Sep 2012, 12:59    Post subject:  

rcrsn51 wrote:
1. As a test, open a terminal and type the command
Code:
mplayer tv://

Does that activate the camera?

I don't see any responce. I guess it doesn't activate it.
The led of the camera is on constantly.

rcrsn51 wrote:

2. You need to determine the USB vendor:product ID codes. With the webcam NOT plugged in, type
Code:
lsusb

Then plug in the camera and type the command again. What are the codes?


sh-4.1# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001


sh-4.1# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 002 Device 004: ID 093a:2621
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9066
Location: Stratford, Ontario

PostPosted: Mon 03 Sep 2012, 14:06    Post subject:  

panoss wrote:
Bus 002 Device 004: ID 093a:2621

I found a reference to this device which claims that it is supported by the two kernel modules gspca_main.ko and gspca_pac7311.ko.

I checked in Lupu and those modules are present but they do NOT support your model. I looked in Slacko and it isn't supported there either.

Plug in the webcam and run "dmesg". What does it say about the device?

[Edit] I found another site claiming that the correct module is gspca_pac7302.ko. I looked in Slacko and that module IS present and it DOES support your 093a:2621.

So try it in Slacko 533.
Back to top
View user's profile Send private message 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Tue 04 Sep 2012, 02:15    Post subject:  

rcrsn51 wrote:
panoss wrote:
Bus 002 Device 004: ID 093a:2621

Plug in the webcam and run "dmesg". What does it say about the device?

I can't find anything about the device, here is the output:
Code:

sh-4.1# dmesg
Linux version 2.6.33.2 (root@puppypc) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Thu May 27 10:56:32 EST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable)
 BIOS-e820: 0000000037fb0000 - 0000000037fbe000 (ACPI data)
 BIOS-e820: 0000000037fbe000 - 0000000037fe0000 (ACPI NVS)
 BIOS-e820: 0000000037fe0000 - 0000000037fee000 (reserved)
 BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x37fb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFE0000000 write-back
  1 base 0020000000 mask FFF0000000 write-back
  2 base 0030000000 mask FFF8000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
ACPI: RSDP 000fb770 00014 (v00 ACPIAM)
ACPI: RSDT 37fb0000 00034 (v01 A_M_I_ OEMRSDT  09000706 MSFT 00000097)
ACPI: FACP 37fb0200 00084 (v02 A_M_I_ OEMFACP  09000706 MSFT 00000097)
ACPI: DSDT 37fb05d0 065A2 (v01  A0865 A0865000 00000000 INTL 20051117)
ACPI: FACS 37fbe000 00040
ACPI: MCFG 37fb0410 0003C (v01 A_M_I_ OEMMCFG  09000706 MSFT 00000097)
ACPI: OEMB 37fbe040 00060 (v01 A_M_I_ AMI_OEM  09000706 MSFT 00000097)
ACPI: HPET 37fb6b80 00038 (v01 A_M_I_ OEMHPET0 09000706 MSFT 00000097)
7MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00016000 - 0001cf00
(13 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0001000000 - 000144c744]    TEXT DATA BSS ==> [0001000000 - 000144c744]
  #3 [000144d000 - 0001453230]              BRK ==> [000144d000 - 0001453230]
  #4 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
  #5 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
  #6 [000009fc00 - 00000f1340]    BIOS reserved ==> [000009fc00 - 00000f1340]
  #7 [00000f147c - 00000ff780]    BIOS reserved ==> [00000f147c - 00000ff780]
  #8 [00000f1340 - 00000f147c]     MP-table mpc ==> [00000f1340 - 00000f147c]
  #9 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
  #10 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
  #11 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
  #12 [0000016000 - 000001d000]          BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x00037fb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00037fb0
On node 0 totalpages: 229183
free_area_init_node: node 0, pgdat c13c1ac0, node_mem_map c1455200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 16 pages used for memmap
  HighMem zone: 1954 pages, LIFO batch:0
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
Allocating PCI resources starting at 38000000 (gap: 38000000:c6c00000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c1c00000 s25816 r0 d23336 u4194304
pcpu-alloc: s25816 r0 d23336 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227391
Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda4
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:00037fb0)
Memory: 904044k/917184k available (2614k kernel code, 12488k reserved, 1250k data, 328k init, 7880k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff6a000 - 0xfffff000   ( 596 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc13c7000 - 0xc1419000   ( 328 kB)
      .data : 0xc128d936 - 0xc13c62e0   (1250 kB)
      .text : 0xc1000000 - 0xc128d936   (2614 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:384
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2209.702 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.40 BogoMIPS (lpj=8838808)
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 15k freed
ACPI: Core revision 20091214
ACPI: setting ELCR to 0200 (from 0c20)
Enabling APIC mode:  Flat.  Using 0 I/O APICs
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Enabling APIC mode:  Flat.  Using 0 I/O APICs
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4419.40 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using PIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - 5F, should be 52 (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x38000000-0xff6fffff] (ignored)
pci 0000:00:01.0: reg 10: [io  0x0900-0x09ff]
pci 0000:00:01.1: reg 10: [io  0x0e00-0x0e3f]
pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xdffff000-0xdfffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xdfffec00-0xdfffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10: [mem 0xdfff8000-0xdfffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:07.0: reg 10: [mem 0xdfffd000-0xdfffdfff]
pci 0000:00:07.0: reg 14: [io  0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10: [io  0xe400-0xe407]
pci 0000:00:08.0: reg 14: [io  0xe080-0xe083]
pci 0000:00:08.0: reg 18: [io  0xe000-0xe007]
pci 0000:00:08.0: reg 1c: [io  0xdc00-0xdc03]
pci 0000:00:08.0: reg 20: [io  0xd880-0xd88f]
pci 0000:00:08.0: reg 24: [mem 0xdfffc000-0xdfffcfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:0d.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs *5 7 10 11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 10 11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 *11 14)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:07: disabling [io  0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
pnp 00:07: disabling [io  0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:07: [io  0x0a30-0x0a37] has been reserved
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x0800-0x080f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [io  0x0580-0x05ff] has been reserved
system 00:07: [io  0x0800-0x087f] could not be reserved
system 00:07: [io  0x0880-0x08ff] has been reserved
system 00:07: [io  0x0d00-0x0d7f] has been reserved
system 00:07: [io  0x0d80-0x0dff] has been reserved
system 00:07: [io  0x2000-0x207f] has been reserved
system 00:07: [io  0x2080-0x20ff] has been reserved
system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
system 00:07: [mem 0xff300000-0xff3fffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0x38000000-0x3fffffff] has been reserved
system 00:0c: [io  0x0230-0x023f] has been reserved
system 00:0c: [io  0x0290-0x029f] has been reserved
system 00:0c: [io  0x0a00-0x0a0f] has been reserved
system 00:0c: [io  0x0a10-0x0a1f] has been reserved
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x37ffffff] could not be reserved
system 00:0f: [mem 0xff700000-0xffffffff] could not be reserved
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0:   bridge window [io  disabled]
pci 0000:00:04.0:   bridge window [mem disabled]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  disabled]
pci 0000:00:09.0:   bridge window [mem disabled]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0:   bridge window [io  disabled]
pci 0000:00:0b.0:   bridge window [mem disabled]
pci 0000:00:0b.0:   bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0:   bridge window [io  disabled]
pci 0000:00:0c.0:   bridge window [mem disabled]
pci 0000:00:0c.0:   bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 3 [io  0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
highmem bounce pool size: 64 pages
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1750
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 16 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 17 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 18 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 11 (level, low) -> IRQ 11
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 11
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 11
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata3.00: ATAPI: Hewlett-Packard CD-Writer Plus 8200a, 1.0g, max UDMA/33
ata3.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
ata3.00: configured for UDMA/33
ata3.01: configured for UDMA/33
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: CD-ROM            HP       CD-Writer+ 8200a 1.0g PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
scsi 2:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
sr 2:0:1:0: Attached scsi CD-ROM sr1
ata4: port disabled. ignoring.
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda4): recovery required on readonly filesystem
EXT3-fs (sda4): write access will be enabled during recovery
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda4): recovery complete
EXT3-fs (sda4): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:4.
Freeing unused kernel memory: 328k freed
EXT3-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda4): using internal journal
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 11, io mem 0xdfffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
IT8712 SuperIO detected.
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
i2c i2c-0: nForce2 SMBus adapter at 0x600
i2c i2c-1: nForce2 SMBus adapter at 0x700
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 5, io mem 0xdffff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sr 2:0:1:0: Attached scsi generic sg2 type 5
usb 2-1: new full speed USB device using ohci_hcd and address 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.103
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 5 (level, low) -> IRQ 5
forcedeth 0000:00:07.0: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1d:60:a5:55:55
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input4
fuse init (API version 7.13)
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
aufs 2-standalone.tree-33-20100329
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 11 (level, low) -> IRQ 11
nvidia 0000:00:0d.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.12  Fri Oct  8 13:22:24 PDT 2010
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Adding 2642652k swap on /dev/sda5.  Priority:-1 extents:1 across:2642652k
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 10 (level, low) -> IRQ 10
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
usbcore: registered new interface driver snd-usb-audio
forcedeth 0000:00:07.0: irq 19 for MSI/MSI-X
forcedeth 0000:00:07.0: irq 19 for MSI/MSI-X
forcedeth 0000:00:07.0: irq 19 for MSI/MSI-X
lp0: using parport0 (interrupt-driven).
lp0: console ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (14134 buckets, 56536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda3): using internal journal
EXT3-fs (sda3): mounted filesystem with ordered data mode
gnome-pty-helpe[9849] general protection ip:b7753e98 sp:bfe46818 error:0 in ld-2.11.1.so[b773e000+1c000]


rcrsn51 wrote:

[Edit] I found another site claiming that the correct module is gspca_pac7302.ko. I looked in Slacko and that module IS present and it DOES support your 093a:2621.

So try it in Slacko 533.

I will try Slacko and inform you about the results.
Back to top
View user's profile Send private message 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Tue 04 Sep 2012, 04:33    Post subject:  

Ok, I'me now using Slacko 5.33 (this message is written in Slacko's Seamonkey) but camera is still not working.
I tried again the comand lsusb :
Code:

# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 093a:2621 Pixart Imaging, Inc.
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9066
Location: Stratford, Ontario

PostPosted: Tue 04 Sep 2012, 05:43    Post subject:  

Type these two commands:
Code:
modprobe gspca_main
modprobe gspca_pac7302
Back to top
View user's profile Send private message 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Tue 04 Sep 2012, 05:59    Post subject:  

rcrsn51 wrote:
Type these two commands:
Code:
modprobe gspca_main
modprobe gspca_pac7302

I typed them.
They returned nothing. Absolutely nothing.
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9066
Location: Stratford, Ontario

PostPosted: Tue 04 Sep 2012, 06:08    Post subject:  

Now run
Code:
mplayer tv://
Back to top
View user's profile Send private message 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Tue 04 Sep 2012, 06:16    Post subject:  

rcrsn51 wrote:
Now run
Code:
mplayer tv://

I run it.
But I can't copy - paste the output.
The console program of Slacko doen't have a copy functionlity! So I attached a screenshot of the console!
sh1.png
Description 
png

 Download 
Filename  sh1.png 
Filesize  199.55 KB 
Downloaded  274 Time(s) 
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9066
Location: Stratford, Ontario

PostPosted: Tue 04 Sep 2012, 06:45    Post subject:  

Mplayer is detecting the webcam, but the key error looks like the unknown format 0x47504a50.

My only other suggestion would be to install guvcview and try it instead of mplayer. Guvcview is available somewhere for Slacko.

[Edit] Look here.

Last edited by rcrsn51 on Tue 04 Sep 2012, 08:08; edited 1 time in total
Back to top
View user's profile Send private message 
Karl Godt


Joined: 20 Jun 2010
Posts: 3964
Location: Kiel,Germany

PostPosted: Tue 04 Sep 2012, 07:52    Post subject:  

panoss wrote:
rcrsn51 wrote:
Type these two commands:
Code:
modprobe gspca_main
modprobe gspca_pac7302

I typed them.
They returned nothing. Absolutely nothing.

They would return something if you
Code:
modprobe -v --first-time gspca_main
modprobe -v --first-time gspca_pac7302

into the console but the interesting parts of information go to /var/log/messages by syslogd | sysklogd or are shown by dmesg command parsing klogd output to /proc/kmsg .

Otherwise the cam was recognized after loading the driver as i would expect from Trust products of which i have two mice, one of the show as "Mosart" in lsusb . There are actually two lsusb possible : The full binary and the busybox applet which does not parse an /usr/share/[misc/]usb.ids file .

Better use cat /proc/bus/usb/devices for lsusb output . The Puppy Busybox-1.15.0 once did not even had lsusb enabled .

*

For the further it seems to need ffmpeg recompiled/up-/down-/graded and or mplayer on your slacko .

Have not compiled ffmpeg from svn but from the main site :
url=http://ffmpeg.org/

-4.5.2 looks pretty old if that points to ffmpeg and not to mplayer :

url=http://www.mplayerhq.hu/design7/news.html 2012-06-10, Sunday :: MPlayer 1.1 released

*

Btw i once managed it to not be able to cp'n'paste from terminal in Puppy but can not remember anymore how . Use the mouse+left-button to highlight and middle click it into an empty sheet .
Back to top
View user's profile Send private message Visit poster's website 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Tue 04 Sep 2012, 08:18    Post subject:  

rcrsn51 wrote:
Mplayer is detecting the webcam, but the key error looks like the unknown format 0x47504a50.

My only other suggestion would be to install guvcview and try it instead of mplayer. Guvcview is available somewhere for Slacko.

[Edit] Look here.

I did what you suggested and guvcview works! Thank you very much my friend!

Now, I want to make it work and in Skype. It doesn't work there.
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9066
Location: Stratford, Ontario

PostPosted: Tue 04 Sep 2012, 08:25    Post subject:  

panoss wrote:
I did what you suggested and guvcview works!

Excellent.
Quote:
Now, I want to make it work and in Skype. It doesn't work there.

Unfortunately, I don't have any experience with Skype in Linux.
Back to top
View user's profile Send private message 
panoss

Joined: 31 Oct 2011
Posts: 107

PostPosted: Tue 04 Sep 2012, 08:30    Post subject:  

Karl Godt wrote:
panoss wrote:
rcrsn51 wrote:
Type these two commands:
Code:
modprobe gspca_main
modprobe gspca_pac7302

I typed them.
They returned nothing. Absolutely nothing.

They would return something if you
Code:
modprobe -v --first-time gspca_main
modprobe -v --first-time gspca_pac7302


I did as you suggested:
Code:

# modprobe -v --first-time gspca_main
FATAL: Module gspca_main allready in kernel

# modprobe -v --first-time gspca_pac7302
FATAL: Module gspca_pac7302 allready in kernel

Karl Godt wrote:

into the console but the interesting parts of information go to /var/log/messages by syslogd | sysklogd .

What do you mean here? To open the file /var/log/messages with syslogd? How?
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 2 [25 Posts]   Goto page: 1, 2 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Video
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1914s ][ Queries: 13 (0.0058s) ][ GZIP on ]