gtkpod 2.0.2 (outdated 2011 version)

Audio editors, music players, video players, burning software, etc.
Message
Author
User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#81 Post by smokey01 »

Tempestuous has there been any advancement for the iPod nano gen6.

I never did get it working and lost interest.

keniv
Posts: 583
Joined: Tue 06 Oct 2009, 21:00
Location: Scotland

#82 Post by keniv »

Hi tempestuous

Thanks for the explanation.

Ken.

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#83 Post by tempestuous »

smokey01 wrote:has there been any advancement for the iPod nano gen6.
Unfortunately, no.
But as I mentioned on the previous page, there's a workaround by "jailbreaking" your device.

If you're happy to hack your Nano's firmware, I can provide some advice via PM.
All I can say on a public forum is that the hacked firmware for a Nano is called "Nan0hail".
I can't post hacking instructions, or links to hacked firmware, because this (arguably) contravenes Apple's intellectual property, and they have been known to issue takedown notices to webpages which publish such information.

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

Re: gtkpod 2.0.2 for iPod-Touch & iPhone

#84 Post by sheldonisaac »

Good morning.

Please excuse, tempestuous and others;

My friend was just given a first-generation iPod.
I thought to put some more music files on it.
Am concerned not to screw up her iPod.

I have never used an iPod or other Apple product before.

Somehow online searching led to this thread.

Before asking any more, may I just ask about this: libanjuta "failed to install"

2078403 2013-11-13 10:22 /mnt/sda4/sources/LinuxSourc/libanjuta-1.0-Puppy5.pet

Lucid Puppy 5.2.8.6 on a Dell D610 laptop.

Any help will be much appreciated.

Sheldon
tempestuous wrote:gtkpod is an iPod manager for Linux.
You must install these two dotpets:
http://minipc.org/ipup/download/gtkpod-2.0.2.pet 2.6 MB
http://minipc.org/ipup/download/libanju ... Puppy5.pet 2.1 MB
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#85 Post by tempestuous »

The installation error may relate to your particular version of Puppy.
sheldonisaac wrote:Lucid Puppy 5.2.8.6 on a Dell D610 laptop.
"5.2.8.6" ? The most recent version of Lucid Puppy I can find is lupu-528.005.iso
from
http://distro.ibiblio.org/puppylinux/puppy-5.2.8/

Can you give more details about your Puppy version, and a download link?

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#86 Post by sheldonisaac »

Good day, tempestuous.
.
tempestuous wrote:The installation error may relate to your particular version of Puppy.
sheldonisaac wrote:Lucid Puppy 5.2.8.6 on a Dell D610 laptop.
"5.2.8.6" ? The most recent version of Lucid Puppy I can find is lupu-528.005.iso from http://distro.ibiblio.org/puppylinux/puppy-5.2.8/

Can you give more details about your Puppy version, and a download link?
Sorry, i wasn't clear enough.

Richard Erwin (with help from playdayz,...) has been working on an update to lupu-528.005. I suppose the kernel is the same, but some newer utilities and applications?
http://www.mediafire.com/folder/dc28t2r ... es-5.2.8.6
I downloaded the lupumini-5.2.8.6-20131028.iso

Here's a post from him on November 6, on the page
http://www.murga-linux.com/puppy/viewto ... start=2490
rerwin wrote:
bigpup wrote:Any chance of Playdayz putting some info about the Lupu 5.2.8.6 update in the first post of this topic?
Maybe time to start new topic for Lupu 5.2.8.6?
That is the plan. Playdayz has offered a link to a new thread, which I plan to start after my next uploaded version.
The delay, now, is to complete an upgraded pfbpanel. Radky and I are working it over, to kill bugs, shrink the window and add some of the Stu90 plugins that also need some work.
Richard
Thanks for your help,
Sheldon
Attachments
image-2.png
(75.2 KiB) Downloaded 406 times
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P

keniv
Posts: 583
Joined: Tue 06 Oct 2009, 21:00
Location: Scotland

#87 Post by keniv »

Hello Sheldon

I used gtkpod 2.0.2 with the origional 528 with playdayz updates but before 528.005. It worked well for transfering music although it did not transfer the images associated with it. I also tried to both delete and add some images. This caused some problems as every thing looked OK with the thumnails but the phone no longer saw the high res images even although they were still there when the phone was mounted as a drive. I think I have some posts about this on this thread. Have just installed the libanjuta-1.0-Puppy5.pet to my test savefile on 5286 with no problems. This was stored on a flash drive (see attached). Perhaps your download was corrupted. I think you will also need the hot fix pet. Don't have much time just now but I will install the whole thing tonight and see if it all works on 5286. Hope this helps.

Regards,

Ken.
Attachments
gtkpodpets.png
(18.36 KiB) Downloaded 485 times

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#88 Post by tempestuous »

Well I just downloaded lupumini-5.2.8.6-20131028.iso
burned it to CD, booted to the CD (I hate the orange desktop theme)
then installed libanjuta dotpet ...
works fine for me.

Your dotpet download(s) might be corrupt.
Or you might need a fresh installation?

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#89 Post by sheldonisaac »

tempestuous wrote:Well I just downloaded lupumini-5.2.8.6-20131028.iso
burned it to CD, booted to the CD (I hate the orange desktop theme)
then installed libanjuta dotpet ...
works fine for me.

Your dotpet download(s) might be corrupt.
Or you might need a fresh installation?
Good morning, tempestuous.
Thanks a lot for this.

I changed the orange desktop of the new LuPu right away!

I'll try another download of libanjuta now.
(Thanks also, keniv, for your response)
Is there a md5sum , to check it?

Thanks again,
Sheldon
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P

keniv
Posts: 583
Joined: Tue 06 Oct 2009, 21:00
Location: Scotland

#90 Post by keniv »

Hello Sheldon

Have installed all three pets in 5286 without problems. Have also just downloaded Richards new iso for 5286. Will try installing the pets in this and see what happens but given the changes in the new iso I don't expect problems.

Regards,

Ken.

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#91 Post by tempestuous »

The md5sum for libanjuta-1.0-Puppy5.pet is
96aef29182e4898d3dd01167efd983de

The md5sum for gtkpod-2.0.2.pet is
ce148f72353bfd3496f4da49ff32da2a

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#92 Post by tempestuous »

Deleted, May 2014
Last edited by tempestuous on Fri 30 May 2014, 05:31, edited 1 time in total.

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

md5sums

#93 Post by sheldonisaac »

Hi, tempestuous. Thanks for your reply.
tempestuous wrote:The md5sum for libanjuta-1.0-Puppy5.pet is
96aef29182e4898d3dd01167efd983de

The md5sum for gtkpod-2.0.2.pet is
ce148f72353bfd3496f4da49ff32da2a
For libanjuta, I got
0a4fb65fbbac28d96e70aa89e140ad1a libanjuta-1.0-Puppy5.pet
on two separate downloads

For gtkpod, I got the same as you said.

Any thoughts as to how to get a good copy of libanjuta?

Thanks again,
Sheldon

EDIT:
I was able to get a good download from
http://minipc.org/ipup/download/
thanks to the advice there to use wget
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

How to load iPod shuffle

#94 Post by sheldonisaac »

OK, gtkpod 2.0.2 runs, thank you.

Is it correct that, after I mount the 1st-generation iPod shuffle to a
directory, such as /mnt/sdb1, the first thing to do is
"Load selected iPod" ?

The shuffle does not show up to be loaded.

What can be done?

Thanks,
Sheldon
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#95 Post by tempestuous »

In the second post in this thread, read the "IMPORTANT UPDATE" section.
You will see that I said to use "/mnt/ipod" as the value for "iPod mountpoint",
but if you have mounted the Shuffle as /mnt/sdb1 then clearly that's what your iPod mountpoint should be.

Post Reply