How to play flash videos in Lucid 5.28?

Booting, installing, newbie
Post Reply
Message
Author
sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

How to play flash videos in Lucid 5.28?

#1 Post by sheldonisaac »

On this Dell Latitude D610 with Lucid Puppy 5.28-005, I can't play video, such as at 6abc.com; I see a gray circle with a right-pointing triangle, click on that, and see blackness where it was.
(Oh - that seems to be a link titled "Please click to download and activate plug-in"??)

On the Dell 8300 with Lucid Puppy 5.28-005, streaming video seems fine.

Opera 11.62 or 12.02 on this computer, 11.62 on the 8300.

I've tried wellminded searching for several days, tried various flashplayer files, getflash, etc etc etc

I hope someone can tell me simple instructions to get it working.

(Online video plays OK on this laptop under MS-Windows XP)

Thanks a lot,

Sheldon

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#2 Post by bigpup »

Where did you get Opera?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#3 Post by sheldonisaac »

bigpup wrote:Where did you get Opera?
Thanks, bigpup, for trying to help.

The 11.62 is from a .pet in the Lucid 5.28 thread.
Can't find that, but see
http://distro.ibiblio.org/puppylinux/pe ... -Lucid.pet

The 12.02 is an .sfs by Terryphi in Browsera and Internet.
http://www.murga-linux.com/puppy/viewtopic.php?t=65426

User avatar
Semme
Posts: 8399
Joined: Sun 07 Aug 2011, 20:07
Location: World_Hub

#4 Post by Semme »

Sheldon- visit this page. Are the lower two checked?

Are there any listings beyond these in your /etc/hosts file?

Code: Select all

127.0.0.1 localhost absolute
192.168.1.1 pc2
192.168.1.2 pc3
192.168.1.3 pc4
# pup-advert-blocker IPs below

# pup-advert-blocker IPs above

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#5 Post by sheldonisaac »

Semme wrote:Sheldon- visit this page. Are the lower two checked?

Are there any listings beyond these in your /etc/hosts file?

Code: Select all

127.0.0.1 localhost absolute
192.168.1.1 pc2
192.168.1.2 pc3
192.168.1.3 pc4
# pup-advert-blocker IPs below

# pup-advert-blocker IPs above
Good morning, Semme.

Here's /etc/hosts:

Code: Select all

127.0.0.1 localhost D619
192.168.1.1 pc2
192.168.1.2 pc3
192.168.1.3 pc4
I didn't understand the page you said to look at; will you be kind enough to explain more? What is the "lower two" you mentioned?

Thank you.

Of course, I will be glad to uninstall/reinstall any programs etc etc etc etc
I have prevously tried starting without the save file; no better.

Is there another place in this forum or elswwhere to ask for help?

Thanks again.

User avatar
Semme
Posts: 8399
Joined: Sun 07 Aug 2011, 20:07
Location: World_Hub

#6 Post by Semme »

These Sheldon.. Do you see my link like below?

Look and make sure this file exists- /usr/lib/mozilla/plugins/libflashplayer.so

If so inclined- use Pfind to *system* search as it's possible you don't have a Mozilla folder..
Attachments
lower_two_here.jpg
(73.5 KiB) Downloaded 665 times

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#7 Post by sheldonisaac »

Semme wrote:These Sheldon.. Do you see my link like below?
Not at first (but eventually; see below) - just a blank area.
Look and make sure this file exists- /usr/lib/mozilla/plugins/libflashplayer.so.
Yes, it was there.

I wondered whether something was wrong in my save file.

So I booted with pfix=ram

Made a new 512MB save file.

Used bootmanager to install Terryphi's Opera 12.02

Then (can't remember how!) I installed flashplayer; maybe via GetFlash??

After that I could see the Global Storage Settings panel at your link.

and other videos such as
http://mindtv.org/cgi-bin/display_asset ... style=mind

Now I need to gradually and carefully restore some of the settings from my old save file.

Is there a better way to do all this?

User avatar
Semme
Posts: 8399
Joined: Sun 07 Aug 2011, 20:07
Location: World_Hub

#8 Post by Semme »

Your new save file.. ext2 or 3? What about the old one?

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#9 Post by bigpup »

Now I need to gradually and carefully restore some of the settings from my old save file.

Is there a better way to do all this?
What settings?

A few things about save files and installing programs.
Make save file and be using it before installing added programs.
Give save file some size.
(To install a program, it temporarily uses about 3 times the space it will occupy after install)
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#10 Post by sheldonisaac »

Semme wrote:Your new save file.. ext2 or 3? What about the old one?
Old one was probably /initrd/mnt/dev_ro2/puppy/lupusave-aug13.2fs

New one is /mnt/home/puppy/lupusave-oct14.2fs

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#11 Post by sheldonisaac »

bigpup wrote:
Now I need to gradually and carefully restore some of the settings from my old save file.

Is there a better way to do all this?
What settings?
Opera bookmarks, Sylpheed folders, swap and other startup stuff, sysinit and shutdown, and so on.
A few things about save files and installing programs.
Make save file and be using it before installing added programs.
Give save file some size.
(To install a program, it temporarily uses about 3 times the space it will occupy after install)

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#12 Post by bigpup »

Never really tried this, but it may work.
Run Lucid Puppy 528 using the new save file.
Click on file icon on desktop.
Window will open showing file system. (the present system operating)
Click on file icon again to open second window.
Now with two open Rox windows.
In second window.
Find the old save file.
Left click on the old save file and it should mount with a Rox window showing contents.
(This may be all you need to use built in file transfer, some of the programs may have).
Find the old files or directories you need and drag and drop to first window (the present system operating).

However, with a possible bad or corrupted save file, you have no way of knowing what is good and what is bad.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#13 Post by sheldonisaac »

bigpup wrote:Never really tried this, but it may work.
Run Lucid Puppy 528 using the new save file.
Click on file icon on desktop.
Window will open showing file system. (the present system operating)
Click on file icon again to open second window.
Now with two open Rox windows.
In second window.
Find the old save file.
Left click on the old save file and it should mount with a Rox window showing contents.
(This may be all you need to use built in file transfer, some of the programs may have).
Find the old files or directories you need and drag and drop to first window (the present system operating).

However, with a possible bad or corrupted save file, you have no way of knowing what is good and what is bad.
Yes, bigpup; I did a little copying, but as you said, I'd better be careful.

User avatar
Semme
Posts: 8399
Joined: Sun 07 Aug 2011, 20:07
Location: World_Hub

#14 Post by Semme »

You could try a filesystemcheck, or, an e2fsck on that save file of yours if you were to again boot live.

It's possible it can rectify whatever corruption, if any, may exist..

Boot live and forward the location of where it's stored.. perhaps /mnt/sda# or such..

For future reference- I'd also stick with an ext3 save..

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#15 Post by sheldonisaac »

Semme wrote:You could try a filesystemcheck, or, an e2fsck on that save file of yours if you were to again boot live.

It's possible it can rectify whatever corruption, if any, may exist..
Thanks, Semme - e2fsck of the previous save files says all are clean.
Boot live and forward the location of where it's stored.. perhaps /mnt/sda# or such..

For future reference- I'd also stick with an ext3 save..
Can I convert the existing ext2 file? Or, how should make the ext3 save file from my new setup?

User avatar
Semme
Posts: 8399
Joined: Sun 07 Aug 2011, 20:07
Location: World_Hub

#16 Post by Semme »

Clean or not I'd still run it with it's -p option, repair. Namely because it sounds like Flash should work.

==

While I personally haven't ever converted an ext2, I imagine it shouldn't pose a problem.

On what type of file-system does the existing one reside?

I won't get to proof it myself til some time later..

==

*PROOFED- and it works fine..
Attachments
fs_report.jpg
(10.98 KiB) Downloaded 373 times

Post Reply