Puppy Linux Discussion Forum

[john biles]

Do these themes work?

Unzip and copy to /usr/share/icewm/themes

[john biles]

Hello oligin10,
Try this; During development I experienced the same problem you have.
I discovered that if I waited long enough (maybe 10 minutes) the theme would load and karamba would also come back.

I'm about to go to work and are doing a 12 hour shift so may not be able to reply for till tomorrow...

Lastly with the large amount of different Hardware out there it is impossible for all configurations to work as expected. Most of us using Linux would have discovered even Ubuntu, Fedora etc with their team of programmers can't get their distro working with ever setup.
One advantage Microsoft has is the Hardware Manufacturer work hand in hand with Microsoft during development which is something Linux doesn't have at the moment.

[oligin10]

Thanks John. No hurry. If you can help with this, that would be great. If not, I will try to find a workaround. I already used petbegone and removed your icewm, and reinstalled exact same version. That works, but it removes your settings. I will keep working on this also, and if I find a solution I will post it. This is not specific to my hardware though, as I tried two different computers, nothing in common except Intel. Not sure what umair tested with though. Thanks again for this great distro. I left it for a while, but after testing ndiswrapper, I have found this to meet and exceed all my needs except for itunes. Thanks again, Rob

[oligin10]

OK, here is a fix I found that will correct problem. First, download petbegone v0.4, "http://www.murga-linux.com/puppy/viewtopic.php?t=17035"
second, download 0pkgs_db-4.21
third, copy icewm from usr/share/icewm to a temp storage area
fourth, reboot into jwm
fifth, run petbegone and remove icewm
sixth, restartx
seventh, reinstall icewm from legacyos package manager
eighth, restartx
ninth, restart icewm from shutdown menu
tenth, delete usr/share/icewm
eleventh, copy your saved icewm and put it back in usr/share

This worked for me, hope it helps someone else. Thanks, Rob

[slenkar]

[umair]

[slenkar]

legacyos 4 can now load my sfs file thanks,

the universal installer cant see any partitions but thats not a big problem

[oligin10]

Hi umair, thanks for posting that you had checked on 2 computers with same results as mine. I'll be waiting to see how my fix works for you. I am working on a remastered version without Karamba or Opera. I was going to keep Opera, but since the flash player was broken, I am trying to find another browser with working flash player. Thanks, Rob

[slenkar]

hi in legacyos 4 Im using a text editor that was made with the fltk gui library, when I use it for a few seconds it crashes X, and in the crash log it says
Backtrace:
0: X(xf86SigHandler+0x77) [0x80bfd57]
1: [0xffffe400]
2: X [0x80efcb8]
3: X [0x80efdd9]
4: X(xf86RecolorCursor+0x107) [0x80f5137]
5: X [0x8159f5b]
6: X(ProcRecolorCursor+0xdf) [0x808d28f]
7: X [0x8146aa7]
8: X(Dispatch+0x1ab) [0x8087ddb]
9: X(main+0x4a4) [0x8070234]
10: /lib/libc.so.6(__libc_start_main+0x12e) [0xb7dac20e]
11: X(FontFileCompleteXLFD+0x1e1) [0x806f591]

Fatal server error:
Caught signal 11. Server aborting
the text editor is for programming and its quite useful, it was compiled with a different version of linux,

[danneauxs]

Ok, been an 80 hour work week so I'm a bit punchy so work with me.

Booted to a live cd on an old athalon 1.8 with 1G of ram.

Seems really nice but no internet.
Manually loaded the rtl8185 and no connection found.
Downloaded the windows driver and loaded the through the wrapper thing and found a connection.
Sorry can't recall the names of the programs since I'm not running it right now but I clicked on the wireless sybol in the upper right and it brought up that scanner program, found my router entered my password and it said I was connected but had a weird IP. Usually I'm in the 192.168.0.* but it has some strange 168.254.172.231 connection. I even turned off security on the router for a bit and it still just connected to the 168.254.172.231 IP.

Damn thing is the first time I did the above I got an internet connection. Downloaded thunderbird from pet repository. I walked away for a few hours after starting the download. When I came back it was finished but no internet connection. I don't think TB had anything to do with it BTW just that I hadn't used the system for a while.

I tried connection but no success. Rebooted but still didn't work. Rebooted to RAM with no saved file did what I did last time but didn't work this time. Best I could do was connect to the 168.254.172.231 IP address and it took several attempts then.

I guess I could buy a new wireless adapter but that's silly just to try out a puplet. I'd might consider it if there was a high linux compatible one out there for very cheap. I bought 4 of these netgear wg111v3 adapters for $20 all together.

Wow, I'm not sure if I made sense but I'm having trouble concentrating and no day off for 2 more weeks so ... anyone needs any info tell me what you need and I'll provide it.

TIA
Danneauxs

[john biles]

Hello danneauxs,
Some users have had better luck with wireless after installing Pwireless2 give that a try. You can download from here.

http://puppylinuxstuff.meownplanet.net/LegacyOS/Legacy-OS-4-Mini-Apps-Respository/

User = puppy / Password = linux

As Legacy OS 4 Mini is based on Puppy 4.2.1 any WiFi drivers found on the forum created for that version of Puppy should work.
In the main Menu look under Internet / Network for link to a folder containing extra WiFi Drivers.

[Keef]

danneauxs

If you are using WPA, pwireless won't work, as it is WEP only.
Try the NetWork Setup (old version), under menu > setup, I think.

[danneauxs]

####Some users have had better luck with wireless after installing Pwireless2 give that a try. You can download from here.

John,
Just got a message that it couldn't find the server.

Keef,
Thanks, I did that. It was the only way I could even get the router SSID to show up. I'd run through the setup like I've done with other puppies (I popped in Lucid Pup 5.* and it worked fine) but it wouldn't connect. I was using WPA/WPA2 which I switched to OPEN but no luck. I didn't try WEP as I assumed if OPEN didn't work then...

I might give it a try. I only have a PCI card (trendnet421PC-423PI) left to try.Just have to take it out of one PC and then install it on the Puppy PC. I don't think it will work at least it's very fussy under windows, needs it's own manager to work.

I might just break down crawl under the house and run a phone line to the PC room and move the DSLmodem/router back there, might even be able to run my extra router as an AP off that to cover the rest of the house.

Thanks again everyone.
Danneauxs

[danneauxs]

OK ditched the USB and installed the PCI card I mentioned. Loaded the drivers and after some futzing got it working. Not sure how all the other devices attached to my router are going to like WEP since verything was humming along on WAP2 nicely.

[john biles]

Hello danneauxs,
Installing Pwireless2 will allow WAP2 in Legacy OS 4 Mini. Just download it as listed earlier in this post then reboot to use.