Precise Puppy RC2, October 20, 2012
Precise RC1
Live CD
save file on CD
Default Application Chooser:
Image viewer selection.
Changed from Viewnior to Mtpaint.
Saved change.
Went back to Image Viewer selection.
Only option displayed was Mtpaint.
Could not change back to Viewnior.
Live CD
save file on CD
Default Application Chooser:
Image viewer selection.
Changed from Viewnior to Mtpaint.
Saved change.
Went back to Image Viewer selection.
Only option displayed was Mtpaint.
Could not change back to Viewnior.
- Attachments
-
- Default Application Chooser.jpg
- (67.87 KiB) Downloaded 1518 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Precise RC1
Live CD
save file on CD
Pcur Cursor Selector
At start says need to install some cursor themes. Says to go to PPM Desktop category to get them.
I am not finding any cursor themes in any repositories under desktop.
Puppy-Precise repository has nothing listed under Desktop.
Live CD
save file on CD
Pcur Cursor Selector
At start says need to install some cursor themes. Says to go to PPM Desktop category to get them.
I am not finding any cursor themes in any repositories under desktop.
Puppy-Precise repository has nothing listed under Desktop.
- Attachments
-
- Cursor select.jpg
- (27.29 KiB) Downloaded 1638 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Precise RC1
Live CD
save file on CD
menu->Desktop->Urxvtset setup terminal emulator
Change borderless setting to on.
Save setting change.
Now select desktop icon for console.
Have fun with the problems this borderless on setting causes.
Live CD
save file on CD
menu->Desktop->Urxvtset setup terminal emulator
Change borderless setting to on.
Save setting change.
Now select desktop icon for console.
Have fun with the problems this borderless on setting causes.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
precise RC1 on macbook pro 3.1
there's something wrong with the libdbus in precice.
i tried installing qbittorent and amarok from the ubuntu repos, both have qt gui's and on running them in the terminal i was getting symbol look up errors for libqt4dbus ...
i reinstalled libdbus from the PPM and this fixed the qt errors. allowing both program to run.
amarok still needed a few things.. one of them was 'libgudev' the PPM shows it as installed when it actually isn't. so the PPM misses this dep when installing amarok.
there's something wrong with the libdbus in precice.
i tried installing qbittorent and amarok from the ubuntu repos, both have qt gui's and on running them in the terminal i was getting symbol look up errors for libqt4dbus ...
i reinstalled libdbus from the PPM and this fixed the qt errors. allowing both program to run.
amarok still needed a few things.. one of them was 'libgudev' the PPM shows it as installed when it actually isn't. so the PPM misses this dep when installing amarok.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Precise RC1 on Dell Dimension 2350. Frugal install.
Tried installing both wine and conky from the repos.
They both were reported as installed but neither were.
Uninstalled both.
I found a d/l somewhere for a wine pet which installed
and seems to work fairly well (but don't know if I should
have for Precise).
The occasional black screen at startup now seems to
always go away after a Restart X Server. Wireless starts
up connected most always as well but requires several
tries of SNS to actually connect otherwise. I view the
Statistics Tab (left click connection icon to view network
interface) and know I'm connected if the ping result
shows up (Time Wait). Be nice if Puppies had a green
"Connected" indicator (and red "Unconnected" if ping fails).
Art
Tried installing both wine and conky from the repos.
They both were reported as installed but neither were.
Uninstalled both.
I found a d/l somewhere for a wine pet which installed
and seems to work fairly well (but don't know if I should
have for Precise).
The occasional black screen at startup now seems to
always go away after a Restart X Server. Wireless starts
up connected most always as well but requires several
tries of SNS to actually connect otherwise. I view the
Statistics Tab (left click connection icon to view network
interface) and know I'm connected if the ping result
shows up (Time Wait). Be nice if Puppies had a green
"Connected" indicator (and red "Unconnected" if ping fails).
Art
they probably did install , a lot of things are ending up in utility, rather than there appropriate section of the menuartsown wrote:Precise RC1 on Dell Dimension 2350. Frugal install.
Tried installing both wine and conky from the repos.
They both were reported as installed but neither were.
Uninstalled both.
I found a d/l somewhere for a wine pet which installed
and seems to work fairly well (but don't know if I should
have for Precise).
The occasional black screen at startup now seems to
always go away after a Restart X Server. Wireless starts
up connected most always as well but requires several
tries of SNS to actually connect otherwise. I view the
Statistics Tab (left click connection icon to view network
interface) and know I'm connected if the ping result
shows up (Time Wait). Be nice if Puppies had a green
"Connected" indicator (and red "Unconnected" if ping fails).
Art
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
ayttm crashing as per usual
you may want to change it for xchat.
you may want to change it for xchat.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Precise 5.3.96 live multi-session cd ....... display,sound and internet all working and correct on initial boot.
# report-video
Report Video 1.3 - Fri 19 Oct 2012 on Precise Puppy 5.3.96 - Linux 3.2.29 i686
Chip description:
d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
X Server: Xorg Driver used: nouveau
X.Org version: 1.11.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
# glxgears
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
5310 frames in 5.0 seconds = 1061.971 FPS
5764 frames in 5.0 seconds = 1152.616 FPS
5759 frames in 5.0 seconds = 1151.568 FPS
5763 frames in 5.0 seconds = 1152.369 FPS
5764 frames in 5.0 seconds = 1152.794 FPS
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 3884MB (201MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 19 Oct 2012 02:31:47 PM CDT
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Gallium 0.4 on NV4C
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
-Display-
Resolution : 1366x768 pixels
Vendor : The X.Org Foundation
Version : 1.11.3
-Monitors-
Monitor 0 : 1366x768 pixels
-OpenGL-
Vendor : nouveau
Renderer : Gallium 0.4 on NV4C
Version : 2.1 Mesa 8.0.2
Direct Rendering : Yes
# report-video
Report Video 1.3 - Fri 19 Oct 2012 on Precise Puppy 5.3.96 - Linux 3.2.29 i686
Chip description:
d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
X Server: Xorg Driver used: nouveau
X.Org version: 1.11.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
# glxgears
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
5310 frames in 5.0 seconds = 1061.971 FPS
5764 frames in 5.0 seconds = 1152.616 FPS
5759 frames in 5.0 seconds = 1151.568 FPS
5763 frames in 5.0 seconds = 1152.369 FPS
5764 frames in 5.0 seconds = 1152.794 FPS
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 3884MB (201MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Fri 19 Oct 2012 02:31:47 PM CDT
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Gallium 0.4 on NV4C
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
-Display-
Resolution : 1366x768 pixels
Vendor : The X.Org Foundation
Version : 1.11.3
-Monitors-
Monitor 0 : 1366x768 pixels
-OpenGL-
Vendor : nouveau
Renderer : Gallium 0.4 on NV4C
Version : 2.1 Mesa 8.0.2
Direct Rendering : Yes
I have notice from your posts on this thread, That you might not be able to run this puppy since it is a pae on the older hardware?artsown wrote:666philb .... no, wine and conky were not in utility
or anywhere else under menu. Also, if wine was installed
I would have expected it to work in some fashion but
my usual sample Windows apps did not not work at
all, merely resulting in a error message.
Art
just a thought
Cheers
'buntu 12.10 's released - all PAE
Sadly for those with older machines, choices have now been further restricted with version 12.10 release of Lubuntu, Xubuntu, etc. Generic kernel is now PAE.
Our community will need to make more non-PAE puppies. I'm using luci-001.005 on an old laptop. Fast, featured, love it.
http://www.murga-linux.com/puppy/viewtopic.php?t=70736
Our community will need to make more non-PAE puppies. I'm using luci-001.005 on an old laptop. Fast, featured, love it.
http://www.murga-linux.com/puppy/viewtopic.php?t=70736
Precise RC1
Live CD
save file on CD
Looking at Bootsysinit.log
Get error message about module loading.
ERROR: modinfo: could not find module ehci_hcd
Live CD
save file on CD
Looking at Bootsysinit.log
Get error message about module loading.
ERROR: modinfo: could not find module ehci_hcd
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Precise RC1
Live CD
save file on CD
Sys-info System Information
The button to run Pupsysinfo is grayed out.
When mouse pointer is over button it says go to help to install program.
OK
After install of program Pupsysinfo the button icon is missing.
Several icons also missing on help window.
See picture.
Live CD
save file on CD
Sys-info System Information
The button to run Pupsysinfo is grayed out.
When mouse pointer is over button it says go to help to install program.
OK
After install of program Pupsysinfo the button icon is missing.
Several icons also missing on help window.
See picture.
- Attachments
-
- sysinfo.jpg
- (53.5 KiB) Downloaded 1301 times
-
- sysinfo help.jpg
- (69.54 KiB) Downloaded 1145 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Suspect download rather than wine problem
Hi artsown,
I suspect a download problem. As I install wine in all Pups, I have a wine pet stored on my hard-drive so as not to have to download each time I set up a Pup. Currently, I'm using Green_dome's wine-1.4-i486.pet. It installed, provided menu listings, and enabled me to click XP executables to run (if portable), or install them.
[By the way, although it probably doesn't matter, but wine-devs use a naming convention: "even for stable, odd for testing." Pets/sfses are named based on the name of the wine source; so wine-1.5 would be from wine's testing branch. The most current pet/sfs based on the stable branch is wine-1.4.1. I downloaded it, but meaning to delete its predecessor, deleted it and haven't bothered to download it again].
Recommend that use your browser to download either of the above from the following links:
1.4.1: http://murga-linux.com/puppy/viewtopic.php?t=53675
1.5.13: http://www.murga-linux.com/puppy/viewto ... &start=330
I know nothing about conky. But one of the reasons I suspect a download problem is that you've had problems with it as well. So I'd also recommend that you check your downloads against the mdsum's you'll find on the above webpages.
mikesLr
I suspect a download problem. As I install wine in all Pups, I have a wine pet stored on my hard-drive so as not to have to download each time I set up a Pup. Currently, I'm using Green_dome's wine-1.4-i486.pet. It installed, provided menu listings, and enabled me to click XP executables to run (if portable), or install them.
[By the way, although it probably doesn't matter, but wine-devs use a naming convention: "even for stable, odd for testing." Pets/sfses are named based on the name of the wine source; so wine-1.5 would be from wine's testing branch. The most current pet/sfs based on the stable branch is wine-1.4.1. I downloaded it, but meaning to delete its predecessor, deleted it and haven't bothered to download it again].
Recommend that use your browser to download either of the above from the following links:
1.4.1: http://murga-linux.com/puppy/viewtopic.php?t=53675
1.5.13: http://www.murga-linux.com/puppy/viewto ... &start=330
I know nothing about conky. But one of the reasons I suspect a download problem is that you've had problems with it as well. So I'd also recommend that you check your downloads against the mdsum's you'll find on the above webpages.
mikesLr
UPDATE: defaults-chooser-0.8.5
defaults-chooser-0.8.5.pet
# v0.8.5 20 Oct 2012 shinobar: fix imageeditor/imageviewer detection (thanks to bigpup)
http://www.murga-linux.com/puppy/viewto ... 475#659475
# v0.8.5 20 Oct 2012 shinobar: fix imageeditor/imageviewer detection (thanks to bigpup)
http://www.murga-linux.com/puppy/viewto ... 475#659475
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
here are the darker theme versions.
- Attachments
-
- precisejl7.07r.jpg
- http://www.mediafire.com/?7v1msw26s6chb
- (19.14 KiB) Downloaded 1727 times
-
- precisejl7.07.jpg
- http://www.mediafire.com/?7v1msw26s6chb
- (19.63 KiB) Downloaded 1573 times
Precise RC1
Live CD
save file on CD
Grub4dos bootloader config.
It is at 3 places in the menu.
Menu->System->
in two places
menu->Setup->
Live CD
save file on CD
Grub4dos bootloader config.
It is at 3 places in the menu.
Menu->System->
in two places
menu->Setup->
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Re: UPDATE: defaults-chooser-0.8.5
I hate to do this to you, but after installing a second browser (I now have 2) the browser selection seems to have the same problem.shinobar wrote:defaults-chooser-0.8.5.pet
# v0.8.5 20 Oct 2012 shinobar: fix imageeditor/imageviewer detection (thanks to bigpup)
http://www.murga-linux.com/puppy/viewto ... 475#659475
After choosing one, that seems to be the only one that is listed when you click on Browser selection.
The other browser does not show up in the list of selections.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
defaults-chooser-0.8.6
OK, updated defaults-chooser-0.8.6.petbigpup wrote:after installing a second browser (I now have 2) the browser selection seems to have the same problem.
# v0.8.6 20Oct2012 shinobar: improve searching desktops (thanks to bigpup)
http://www.murga-linux.com/puppy/viewto ... 475#659475
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]