Precise Puppy 5.4 and 5.4.2

Please post any bugs you have found
Message
Author
User avatar
FeodorF
Posts: 293
Joined: Wed 07 Jul 2010, 09:44
Location: Heidelberg, Germany

z_epdfview_fix_precise-20121106.pet works correctly

#281 Post by FeodorF »

Precise Puppy 5.4.0.90 works fine on my Pentium II 266 with 768MB.
Using the frugal mode on a 2GB hard disk.
The 'z_epdfview_fix_precise-20121106.pet' works fine too.

Regards Feodor

Rem. For the ones interested, I have added 'hardinfo _report'. Posting with this 'oldish' system right now.
Attachments
PrecisePuppyOn_P-II_266.jpg
(40.74 KiB) Downloaded 1150 times
hardinfo_report_P_II_266.html.gz
(5.57 KiB) Downloaded 650 times
WithBKpet.jpg
(21.5 KiB) Downloaded 1347 times
Before.jpg
(24.55 KiB) Downloaded 1376 times
Last edited by FeodorF on Wed 07 Nov 2012, 23:48, edited 1 time in total.

sredmon
Posts: 23
Joined: Mon 16 May 2011, 18:27

Tray missing

#282 Post by sredmon »

I am using retroprecise installed on usb and it has been working well until today. Tray is missing except for section with "menu" and "show desktop" icons. System icons in lower right are missing and minimized apps disappear. Tray does not extend across bottom of screen - only displays in lower left corner. Also, yesterday I tried adding panel button with jwm panel button configuring tool, but they never appeared in the tray.

Any suggestions?

akash_rawal
Posts: 229
Joined: Wed 25 Aug 2010, 15:38
Location: ISM Dhanbad, Jharkhand, India

#283 Post by akash_rawal »

akash_rawal wrote: Also gio has problems using modules. It's a glib bug and affects some other distros as well.
I have recompiled glib from original sources and that fixes the module loading problem.
http://dl.dropbox.com/u/58347439/protec ... 0-i686.pet

akash_rawal
Posts: 229
Joined: Wed 25 Aug 2010, 15:38
Location: ISM Dhanbad, Jharkhand, India

#284 Post by akash_rawal »

Testing precise 5.4.0.90.

Looks like the session saving problem is solved, I'm unable to reproduce it now.

Problems with gdb and gio modules persist.

I'll continue testing and report back more. :)

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: mpscan update needed

#285 Post by BarryK »

peebee wrote:The new Network rox app needs the updated mpscan from:

http://murga-linux.com/puppy/viewtopic.php?t=81808

to work satifactorily in some configurations
Done:
http://bkhome.org/blog2/?viewDetailed=00018
[url]https://bkhome.org/news/[/url]

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#286 Post by 01micko »

akash_rawal wrote:
akash_rawal wrote: Also gio has problems using modules. It's a glib bug and affects some other distros as well.
I have recompiled glib from original sources and that fixes the module loading problem.
http://dl.dropbox.com/u/58347439/protec ... 0-i686.pet
Did you include jemimah's patches for media/mnt and the help browser? If so, then it would solve bigpup's issue with the help in all gtk apps.
Puppy Linux Blog - contact me for access

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#287 Post by BarryK »

bigpup wrote:
BarryK wrote:I think that John Murga has made changes to the Forum recently. It keeps on logging me out. Anyone else got this problem?
From the forum FAQ
Why do I get logged off automatically?
If you do not check the Log me in automatically box when you log in, the board will only keep you logged in for a preset time. This prevents misuse of your account by anyone else. To stay logged in, check the box during login. This is not recommended if you access the board from a shared computer, e.g. library, internet cafe, university cluster, etc.
What I am reporting is a change in behaviour of the forum.

Sometimes it logs me out only a few minutes after logging in. Even if I am active on the forum.

The previous behaviour was that it would log me out after a certain period of inactivity. I don't recall how long, maybe half an hour. It was a generous period of inactivity.

I used to have this problem with my Telstra mobile broadband connection. I did report the problem to John, but it never got fixed. After I changed to Optus, the problem went away.
Until now, suddenly I have that problem with Optus also.
[url]https://bkhome.org/news/[/url]

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#288 Post by BarryK »

akash_rawal wrote:Testing precise 5.4.0.90.

Looks like the session saving problem is solved, I'm unable to reproduce it now.

Problems with gdb and gio modules persist.

I'll continue testing and report back more. :)
Do you mean even after installing your PET:
http://dl.dropbox.com/u/58347439/protec ... 0-i686.pet

Precise still has module loading problems?
[url]https://bkhome.org/news/[/url]

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#289 Post by BarryK »

akash_rawal wrote:Finished downloading precise 5.4. Testing it reveals several problems.

On first boot it refused to save the session. After asking for save file name it rebooted without saving session. Next time I ran wmreboot in terminal but this time it worked properly. :? Will try again to reproduce the problem.

Display, opengl and internet is working properly. Posting from there now.

In devx gdb doesn't work.

Code: Select all

# gdb
gdb: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory
#
Installing libpython2.7_2.7.3-0ubuntu3_i386.deb fixes gdb.

Also gio has problems using modules. It's a glib bug and affects some other distros as well. See here.

Edit: Didn't see precise 5.4.0.90.
Thanks, libpython2.7 will be in the devx.
[url]https://bkhome.org/news/[/url]

User avatar
rerwin
Posts: 2017
Joined: Wed 24 Aug 2005, 22:50
Location: Maine, USA

Infrastructure mods to facilitate addition of Frisbee

#290 Post by rerwin »

Barry,
Testing of my integrated Frisbee is progressing well. Although I am not ready to submit it for additon to the puppy package library, the infrastructure changes are straightforward and would simplify users' and developers' addition of Frisbee.

Please consider updating woof with the first four packages posted here:
http://www.murga-linux.com/puppy/viewto ... 518#662518

The fifth (dhcpcd-dropwait) can also be added to the puppy package library, although substituting it in woof for dhcpcd could benefit connection stability for all network managers.

My main concern, though, is that the woof-resident changes be made, including the addition of a slot for a separate wag_profiles package. Please see the description associated with those packages at the above link. I recognize that it is late in the cycle, but ask for it because it would avoid users needing to modify to puppy infrastructure.
Richard

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: Infrastructure mods to facilitate addition of Frisbee

#291 Post by BarryK »

rerwin wrote:Barry,
Testing of my integrated Frisbee is progressing well. Although I am not ready to submit it for additon to the puppy package library, the infrastructure changes are straightforward and would simplify users' and developers' addition of Frisbee.

Please consider updating woof with the first four packages posted here:
http://www.murga-linux.com/puppy/viewto ... 518#662518

The fifth (dhcpcd-dropwait) can also be added to the puppy package library, although substituting it in woof for dhcpcd could benefit connection stability for all network managers.

My main concern, though, is that the woof-resident changes be made, including the addition of a slot for a separate wag_profiles package. Please see the description associated with those packages at the above link. I recognize that it is late in the cycle, but ask for it because it would avoid users needing to modify to puppy infrastructure.
Richard
Richard,
It is too late in the development cycle for Precise 5.4.1. This is almost ready to be released, and anyway the intention was bug-fixes only relative to 5.4.

Infrastructure changes to support Frisbee can be considered after 5.4.1 is released.
[url]https://bkhome.org/news/[/url]

User avatar
L18L
Posts: 3479
Joined: Sat 19 Jun 2010, 18:56
Location: www.eussenheim.de/

Re: regular expression evaluation and learning tool

#292 Post by L18L »

BarryK wrote:
L18L wrote:
file:///usr/share/doc/HOWTO-regexps.htm wrote:[Note: Puppy has a regular expression evaluation and learning tool in the Utilities menu]
Once upon a time (version 1.04) I have used it much.
But now it seems to have disappeared :cry:
Yes, that was a long time ago. If I recall rightly, there were two of them, one was written in tcl/tk, the other gtk1.2.

Which was why we had to leave them behind.
Hi Barry,
I have searched, found and installed another tool:
my console wrote:# regetron
Regetron! The regex teaching SHELL.
Type your regex at the prompt and hit enter. It'll show you the
lines that match that regex, or nothing if nothing matches.
Hit CTRL-d to quit (CTRL-z on windows).
>
installed:

Code: Select all

git clone git://gitorious.org/regetron/regetron.git 
cd regetron 
python setup.py install
like advised at
http://regex.learncodethehardway.org/bo ... #x6-100001

akash_rawal
Posts: 229
Joined: Wed 25 Aug 2010, 15:38
Location: ISM Dhanbad, Jharkhand, India

#293 Post by akash_rawal »

01micko wrote:
akash_rawal wrote:
akash_rawal wrote: Also gio has problems using modules. It's a glib bug and affects some other distros as well.
I have recompiled glib from original sources and that fixes the module loading problem.
http://dl.dropbox.com/u/58347439/protec ... 0-i686.pet
Did you include jemimah's patches for media/mnt and the help browser? If so, then it would solve bigpup's issue with the help in all gtk apps.
No, I used the original, unmodified source. I'll check out the patch soon.

Till now abiword is the only program I find with help not working, irrespective of manually compiled glib or precise glib. "Operation not supported" is the warning printed on terminal. Is this problem you are talking about?

But running gdb on abiword reveals it uses its own c++ functions to implement help.

Code: Select all

Breakpoint 1, 0xb70207f0 in g_log () from /lib/libglib-2.0.so.0
(gdb) bt
#0  0xb70207f0 in g_log () from /lib/libglib-2.0.so.0
#1  0x083affb6 in XAP_UnixAppImpl::openURL(char const*) ()
#2  0x08189b9f in helpLocalizeAndOpenURL(char const*, char const*, char const*)
    ()
#3  0x08189c4a in ap_EditMethods::helpContents(AV_View*, EV_EditMethodCallData*) ()
#4  0x082850bd in EV_Menu::invokeMenuMethod(AV_View*, EV_EditMethod*, UT_String const&) ()
#5  0x083cf590 in EV_UnixMenu::menuEvent(int) ()
#6  0xb7142b3c in g_cclosure_marshal_VOID__VOID ()
   from /usr/lib/libgobject-2.0.so.0
#7  0xb7140dd4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#8  0xb71537d9 in ?? () from /usr/lib/libgobject-2.0.so.0
#9  0xb715c02f in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#10 0xb715c233 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
#11 0xb7d03395 in gtk_widget_activate () from /usr/lib/libgtk-x11-2.0.so.0
#12 0xb7be0667 in gtk_menu_shell_activate_item ()
   from /usr/lib/libgtk-x11-2.0.so.0
...
So maybe you are talking about something else I didn't get...

akash_rawal
Posts: 229
Joined: Wed 25 Aug 2010, 15:38
Location: ISM Dhanbad, Jharkhand, India

#294 Post by akash_rawal »

BarryK wrote:
akash_rawal wrote:Testing precise 5.4.0.90.

Looks like the session saving problem is solved, I'm unable to reproduce it now.

Problems with gdb and gio modules persist.

I'll continue testing and report back more. :)
Do you mean even after installing your PET:
http://dl.dropbox.com/u/58347439/protec ... 0-i686.pet

Precise still has module loading problems?
No, I meant even in precise 5.4.0.90 I have to install the pet to correct the problem.

The problem is solved after installing the pet.

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#295 Post by 666philb »

there's a bug when installing .deb files. the categories section of the .desktop file in /usr/share/applications gets changed!
this has also been noted by Jejy69 http://www.murga-linux.com/puppy/viewtopic.php?t=81852

for example in the openshot.deb, /usr/share/applications/openshot.desktop looks like this

Code: Select all

Categories=GNOME;GTK;AudioVideo;Video;AudioVideoEditing;
after installing though it looks like this

Code: Select all

Categories=Utility
same with the deadbeef.deb from

Code: Select all

Categories=AudioVideo;Player;GTK;
to

Code: Select all

Categories=Utility
this is making nearly everything installed from the ppm end up in the 'utility' menu
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

User avatar
rerwin
Posts: 2017
Joined: Wed 24 Aug 2005, 22:50
Location: Maine, USA

Re: Infrastructure mods to facilitate addition of Frisbee

#296 Post by rerwin »

BarryK wrote:Richard,
It is too late in the development cycle for Precise 5.4.1. This is almost ready to be released, and anyway the intention was bug-fixes only relative to 5.4.

Infrastructure changes to support Frisbee can be considered after 5.4.1 is released.
Right. The goal is to get the implementation into the woof structure for all puppies, not precise 5.4.1. Thanks for clarifying that for me.
Richard

akash_rawal
Posts: 229
Joined: Wed 25 Aug 2010, 15:38
Location: ISM Dhanbad, Jharkhand, India

#297 Post by akash_rawal »

Glade interface designer doesn't work.

Code: Select all

# glade
glade: error while loading shared libraries: libgtk-3.so.0: cannot open shared object file: No such file or directory
# 
Instead of adding gtk3 maybe it would be better to provide glade separately, as gtk3 could be large?

User avatar
dennis-slacko531
Posts: 100
Joined: Wed 18 Jan 2012, 21:53
Location: Oregon
Contact:

Help with finding BlueGriffon

#298 Post by dennis-slacko531 »

Maybe I belong in the beginners forum, but I hope not. BlueGriffon is a wysiwyg website builder I'd like to try. It's popular so I expected it to be found with PPM --but nothing available. I appreciate any & all help.

** FREE CONCERT:
I'm discovering this puppy is excellent with multimedia. If anyone wants to hear Bob Dylan's (live & great) concert from last month at the Hollywood Bowl, here's the link from a DJ that I Twitter follow.

http://www.radio4all.net/responder.php/ ... &version=1

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

I'll try again

#299 Post by tlchost »

This latest version of precise does not recognize my audio chip. I tried all the steps...what information to I need to post to allow someone to either tell me how to fix the problem, or not to continue the effort.

Thanks

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

Re: Help with finding BlueGriffon

#300 Post by 01micko »

dennis-slacko531 wrote:Maybe I belong in the beginners forum, but I hope not. BlueGriffon is a wysiwyg website builder I'd like to try. It's popular so I expected it to be found with PPM --but nothing available. I appreciate any & all help.
You can get from here: http://distro.ibiblio.org/puppylinux/pe ... 2-i686.pet

-

akash_rawal

To save you the hunt I've attached the glib patch I use in Slacko-beta series based on slackware-14.0. This is based directly on jemimah's work.

Cheers
Attachments
glib-2.32.4_slacko-121002.patch.gz
(815 Bytes) Downloaded 663 times
Puppy Linux Blog - contact me for access

Post Reply