Sound of One claw clicking

Please post any bugs you have found
Post Reply
Message
Author
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

Sound of One claw clicking

#1 Post by Lobster »

Hi Barry here is the results of the probe you asked about

============
# modprobe via82cxxx_audio
Note: /etc/modules.conf is more recent than /lib/modules/2.4.27/modules.dep
/lib/modules/2.4.27/sound/via82cxxx_audio.o.gz: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including inva lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.27/sound/via82cxxx_audio.o.gz: insmod /lib/modules/2.4.27/sound /via82cxxx_audio.o.gz failed
/lib/modules/2.4.27/sound/via82cxxx_audio.o.gz: insmod via82cxxx_audio failed
==============

Soon we will hear sound
What will we hear?
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#2 Post by BarryK »

...umm, you are running Pup 1.0.1. Try 1.0.2RC.

Guest

#3 Post by Guest »

Computers would be great if not for end users

[ahem]

:oops:

Sound working (output tested only)

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#4 Post by Lobster »

As you may have guessed the previous guest was me . . .

Input on xs sound editor (which was working last time tested) is just producing a buzz . . .

so not sure were to begin with that put playing test sounds work . . .
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

wscarl
Posts: 99
Joined: Mon 16 May 2005, 15:22
Location: NY

No sound 1.0.2 Crystal CS 4237 Chipset

#5 Post by wscarl »

AST Ascenia M Series 233mhz 64meg ram 8.5 hd(install large HD with 1.0.2) cdrom ext floopy
Netgear FA511 (using tulip driver) the Sound is not working Crystal CS4237
and nothing list under sound? Are there Linux drivers for the Crystal CS4237
chipset and How do I load then?
This is the fist time loading to this Laptop, have been using Desktop - But Lobster easy HD install direction's Thank's Lobster I have been installing 1.0.1 on All my old Hardware with <128 ram! Make those old dogs run like pupies agian!!!!!!

wscarl
Posts: 99
Joined: Mon 16 May 2005, 15:22
Location: NY

need to dig out my linux/programing book's start relearning

#6 Post by wscarl »

Are You going to write a sound install script any time soon? :wink: Don't known how to get sound working. :oops:
need to dig out my linux/programing book's start relearning linux command line! :? Gui Has made me lazy! :oops:

Guest

Sound not detected on nForce2

#7 Post by Guest »

I have an asus motherboard A7N8X-X with nForce2 sound (Harddrive 2 Install). Found that Puppy 1.0.2 had the driver, but was not detected (i810_audio). It was calling out for (10de: 6a) in the hardware probe. At /lib/libhardware/ soundcard.db found line 10de|006b|i810_audio|nVidia|Sound nForce2 APU. Changed b to a on that line and it now auto detects without modprobing. Lost the use of 2barks.au to my wife's cats joy. All else seems all right.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

One Partition HD install

#8 Post by Lobster »

wscarl wrote:Lobster easy HD install direction's Thank's Lobster I have been installing 1.0.1 on All my old Hardware with <128 ram! Make those old dogs run like pupies agian!!!!!!


:oops:

I am glad those instructions worked. I tried the option 2 install from "no-brain" mode (my usual state of mind) and ran into problems.

This is how I understand the situation:

I prepared a single partition hardisk
I booted from Puppy
Puppy asks 3 questions which places a puppy001 on the hard disk
When using the option 2 install this file means Puppy won't install on the partition it thinks you have booted from

Now the easiest install to HD for me was when I used the script someone prepared that was eventually incorporated into the Puppy HD install.

Jester yesterday was also having problems with the HD install. Hope he got my IRC messages and was successful.

Now these are my instructions:
http://www.goosee.com/puppy/wikka/HardDiskInstall

How anyone can make any sense of them I am not sure.
At the moment I am happily booting from CD

but I have a HD awaiting a simple set of instructions?

Who will help us?
:)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: Sound not detected on nForce2

#9 Post by BarryK »

Anonymous wrote:I have an asus motherboard A7N8X-X with nForce2 sound (Harddrive 2 Install). Found that Puppy 1.0.2 had the driver, but was not detected (i810_audio). It was calling out for (10de: 6a) in the hardware probe. At /lib/libhardware/ soundcard.db found line 10de|006b|i810_audio|nVidia|Sound nForce2 APU. Changed b to a on that line and it now auto detects without modprobing. Lost the use of 2barks.au to my wife's cats joy. All else seems all right.
Thanks, I'll add it in.

Kal
Posts: 626
Joined: Thu 05 May 2005, 16:59
Location: California, High Desert

#10 Post by Kal »

Anonymous was Kal, learning how to login. Thanks for the little os with the big bite. your welcome.

Post Reply