How to use USB 3 PCI Express card in Puppy?
How to use USB 3 PCI Express card in Puppy?
I added a 2-port USB 3 PCI Express card to my computer. Hardinfo sees it but Puppy doesn't see anything I plug into either of the USB 3 ports. How do I use it in Puppy?
- Attachments
-
- USB 3 PCI card hardinfo.png
- (74.83 KiB) Downloaded 528 times
Could you provide a link for that driver? Spoke too soon. Found and downloaded by doing a post search for xhci.
Better to get it before it disappears into the background!
Also, do you know if Puppy supports the external hard drives that are connected with a 1394iee cable as in the case of a Toshiba external 1-3gig drive?
Better to get it before it disappears into the background!
Also, do you know if Puppy supports the external hard drives that are connected with a 1394iee cable as in the case of a Toshiba external 1-3gig drive?
http://murga-linux.com/puppy/viewtopic. ... 853#453853
You need to modprobe xhci for loading it straight away. And this is about Lucid Puppies without that driver. I dont know the status of those improved later Lucid Puppy versions. I havent followed what Playdayz included in them.
Flash might post his used Puppy version. Like we ask from newbies
You need to modprobe xhci for loading it straight away. And this is about Lucid Puppies without that driver. I dont know the status of those improved later Lucid Puppy versions. I havent followed what Playdayz included in them.
Flash might post his used Puppy version. Like we ask from newbies
Last edited by pemasu on Thu 17 Jan 2013, 21:16, edited 2 times in total.
Ooopss, there it is!
http://www.murga-linux.com/puppy/viewto ... 853#453853
The forums search routine is nice (as I've discovered newly): searched for xhci AND driver on forum member Tempestuous ---> Search found 2 matches
http://www.murga-linux.com/puppy/viewto ... 853#453853
The forums search routine is nice (as I've discovered newly): searched for xhci AND driver on forum member Tempestuous ---> Search found 2 matches
[b][url=http://lazy-puppy.weebly.com]LazY Puppy[/url][/b]
[b][url=http://rshs-dna.weebly.com]RSH's DNA[/url][/b]
[url=http://murga-linux.com/puppy/viewtopic.php?t=91422][b]SARA B.[/b][/url]
[b][url=http://rshs-dna.weebly.com]RSH's DNA[/url][/b]
[url=http://murga-linux.com/puppy/viewtopic.php?t=91422][b]SARA B.[/b][/url]
Oops. It's Wary 5.2.2.pemasu wrote:...Flash might post his used Puppy version. Like we ask from newbies
I downloaded Tempestuous' xhci k 2.6.33.2 .pet and installed it in Wary 5.2.2 multisession DVD (RAM only at this point), then did modprobe xhci and got error message "Fail: no xhci module" or something close to that. So I saved to the DVD and rebooted, but still no luck.
Does anyone know if any Puppy derivative comes with USB 3 enabled?
Flash. My suggestion was based on possibility that you could use Lucid Puppy. The driver I posted about is kernel module driver and it is kernel version spesific. I dont know the kernel status of Wary, if it has xhci kernel module driver available. Fatdog surely has, as all newer kernel version puppies.
So....You cant try that xhci driver meant for Lucid Puppies in Wary.
So Fatdog should have xhci kernel module driver available. It can be included as kernel modude or compiled in to the kernel. So..it should have been in use. If Fatdog does not show the drive....then the problem probably lies in somewhere else. Your interface has been seen, in Fatdog I presume the xhci is available...so the problem is probably more complicated.
Of course you can try that modprobe xhci to be sure. If you then check lsmod, it could show that xhci has been loaded, but...if it has been compiled in to the kernel, it wont be showed...even that is is in use.
If you use latest Fatdog....you could ask more questions straight from jamesbond.
So....You cant try that xhci driver meant for Lucid Puppies in Wary.
So Fatdog should have xhci kernel module driver available. It can be included as kernel modude or compiled in to the kernel. So..it should have been in use. If Fatdog does not show the drive....then the problem probably lies in somewhere else. Your interface has been seen, in Fatdog I presume the xhci is available...so the problem is probably more complicated.
Of course you can try that modprobe xhci to be sure. If you then check lsmod, it could show that xhci has been loaded, but...if it has been compiled in to the kernel, it wont be showed...even that is is in use.
If you use latest Fatdog....you could ask more questions straight from jamesbond.
Sorry, I didn't make myself clear. Fatdog64-611 does see the USB 3 ports and whatever I plug into them. The problem is, Fatdog is over 200 MB and so it takes about 5 minutes for it to boot from that mini-CD.
Now that I know that at least some recent Puppies can use the USB 3 ports, I'll keep trying smaller ones until I find one that works.
However, I do want to install the xhci in a Puppy. If I can't find a Lucid Puppy DVD lying around, I'll download the latest Lucid and make one.
Again, thanks for all your help.
Now that I know that at least some recent Puppies can use the USB 3 ports, I'll keep trying smaller ones until I find one that works.
However, I do want to install the xhci in a Puppy. If I can't find a Lucid Puppy DVD lying around, I'll download the latest Lucid and make one.
Again, thanks for all your help.