Bootable CD not working.
- JamesTheAwesomeDude
- Posts: 99
- Joined: Tue 29 Jan 2013, 17:17
- Location: Classified
Bootable CD not working.
I burned PuppyLinux to a CD, because the computer I'm trying to put it on doesn't support USB boot. However, when it boots up, the part where it normally has a image and the message "wait 5 seconds for normal boot" just has a TON of text scrolling up the screen. (This isn't normal boot-up text; it's the orange prompt, spammed over and over and over and over and over and over...)
Floppy booting is not an option. I've tried to create a bootable floppy disk, but this happens: http://imgur.com/a/pevmu
Floppy booting is not an option. I've tried to create a bootable floppy disk, but this happens: http://imgur.com/a/pevmu
- JamesTheAwesomeDude
- Posts: 99
- Joined: Tue 29 Jan 2013, 17:17
- Location: Classified
I burned it with Brasero on Ubuntu, I have successfully made bootable CDs before, and the CD does boot in my "normal" computer. (I actually installed it on the USB drive via the Universal USB installer, which was run off the CD.)Flash wrote:How did you burn the Puppy iso onto the CD? (What burning program did you use and what options?) Have you made a bootable CD before with this program? Will the Puppy CD you made boot in another computer?
The older computer, which has no USB boot support, is the one that has trouble booting the Live CD. (NOTE: I tried waiting 5 seconds, just to see if it was going to work anyway, but nothing interesting happened. 30 seconds and 5 minutes both yielded the same results.)
It sounds like a hardware problem then. The old computer, or its CD drive or its BIOS, is toast. Do you have another bootable CD, such as a Windows installation CD, that you could try just to see if it will boot?
Also it's possible that the disk brand is incompatible with the drive. If you have a different brand of CD, try that. A CD-RW would be good, so you don't keep making coasters.
Also it's possible that the disk brand is incompatible with the drive. If you have a different brand of CD, try that. A CD-RW would be good, so you don't keep making coasters.
- JamesTheAwesomeDude
- Posts: 99
- Joined: Tue 29 Jan 2013, 17:17
- Location: Classified
Oh... lemme give that a shot.
I'm burning the CD as I'm typing. It says it's burning at ~8.2x, even though I told it 4x tops. Is this bad?? I'll try to get it to boot in the morning, I just want to know whether it has a serious chance of succeeding.
Also, is a CD burned at a lower speed slower to read? Faster to read? No difference? Is it more likely to have an error? What effect, exactly, does burning @ slower speed have on the finished CD?
I'm burning the CD as I'm typing. It says it's burning at ~8.2x, even though I told it 4x tops. Is this bad?? I'll try to get it to boot in the morning, I just want to know whether it has a serious chance of succeeding.
Also, is a CD burned at a lower speed slower to read? Faster to read? No difference? Is it more likely to have an error? What effect, exactly, does burning @ slower speed have on the finished CD?
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=84349][img]http://i.imgur.com/Zw6vryI.png[/img][color=#3B6EA3][b][size=200] Version 27. Dotpet. Click here.[/size]
(SFS available too!)[/b][/color][/url]
(SFS available too!)[/b][/color][/url]
- JamesTheAwesomeDude
- Posts: 99
- Joined: Tue 29 Jan 2013, 17:17
- Location: Classified
Flash,
No.. the computer successfully booted from a Lubuntu CD. I got that CD out of the exact same pack as the Puppy CD. I even burned it with the same burner. The CDs were even the same color (both light blue.)
Right now, I'm trying starhawk's suggestion of the lower burn speed. I told it to burn at 4x, and it burned at 8.2x for most of the time, so I'll see if it works tomorrow. (I have one monitor for both computers. I have no VGA cable, so both computers need to use DVI, so I can't have them both plugged into the monitor at the same time. The back of the monitor is hard to reach, the cables are hard to change, and I'm UTC-6, so I'm hitting the hay. I'll test it out tomorrow, and post the results.)
Thank you for all your help so far!
No.. the computer successfully booted from a Lubuntu CD. I got that CD out of the exact same pack as the Puppy CD. I even burned it with the same burner. The CDs were even the same color (both light blue.)
Right now, I'm trying starhawk's suggestion of the lower burn speed. I told it to burn at 4x, and it burned at 8.2x for most of the time, so I'll see if it works tomorrow. (I have one monitor for both computers. I have no VGA cable, so both computers need to use DVI, so I can't have them both plugged into the monitor at the same time. The back of the monitor is hard to reach, the cables are hard to change, and I'm UTC-6, so I'm hitting the hay. I'll test it out tomorrow, and post the results.)
Thank you for all your help so far!
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=84349][img]http://i.imgur.com/Zw6vryI.png[/img][color=#3B6EA3][b][size=200] Version 27. Dotpet. Click here.[/size]
(SFS available too!)[/b][/color][/url]
(SFS available too!)[/b][/color][/url]
Hm, the only other thing I can think of is the iso you burned onto the CD must be corrupted somehow. Can you download it again, perhaps from a different source?JamesTheAwesomeDude wrote:.. the computer successfully booted from a Lubuntu CD. I got that CD out of the exact same pack as the Puppy CD. I even burned it with the same burner. The CDs were even the same color (both light blue.)
@JamesTheAwesomeDude
Is it the Pentium1 from here?
Which Puppy do you try?
@tytower
You can find something similar in the upper left corner of each forum page .
Rolf
Is it the Pentium1 from here?
Which Puppy do you try?
@tytower
Code: Select all
You last visited on Today, at 2:38 pm
The time now is Thu Jan 31, 2013 4:49 pm
All times are UTC - 4
Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.
Raspberry Pi without Puppy? No, thanks.
James,
It would be of great assistance to all those who are currently trying to help you, if you in turn would give full details of both the Puppy version you are attempting to boot from, and the specifications of the host computer: name/brand, processor, memory, video display and hard drive. At the moment there is nothing to go on.
It would be of great assistance to all those who are currently trying to help you, if you in turn would give full details of both the Puppy version you are attempting to boot from, and the specifications of the host computer: name/brand, processor, memory, video display and hard drive. At the moment there is nothing to go on.
If other disks boot it sounds like a disk problem to me too. Download and burn again. Some people feel burning at a slower speed gives better results but over the years I have not noticed any errors caused by burn speed . It used to be the way I set it up that caused the problems as I always wanted to burn them "multisession" and that caused problems early on. Not now though
PBurn is brilliant in my opinion
PBurn is brilliant in my opinion